PSE standard product ACROLINK power plug Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
Unspecified marble board. The top plate and 5 sides have a mirror finish. Use it for amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W300 x H30 x D450 mm 10.6 kg (actual measurement)
A pair of 2 corian boards with unknown details seems to be just the right size for small speakers, etc. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W180 x H7 x D270 mm 0.6 kg (actual measurement)
This is a set of 4 round insulators with unknown details. There is a dent in the center of each. It is sturdy with a sense of weight. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 39φ×H17mm weight 140g
A set of 2 seems to be a choke transformer, but the details are unknown. Measured DC resistance value 380/373Ω W31H95 x 44mm 0.31 kg/piece (actual measurement, not including protrusions), only conduction and resistance values have been confirmed by a tester (Kojima Yosuke)
Accessories: none
Unspecified mmType cartridge. It's very similar to the cartridge that comes with the DENON DP-500M. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Unspecified EP adapter. Includes an overhang gauge and is equipped with a level gauge. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: Weight 62 g (actual measurement)
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
The disposal price has been reduced. 2024/3/31 sales price 378,000 yen equipped with a long arm RMG309i for SPU-G shells! The dust cover will be replaced with a new one in 2022. You can enjoy the fluffy feeling unique to Torrens belt drives, and the afterglow of the sound fading away. You can enjoy the rich sound of the SPU, which is firmly scraped out from the depths of the sound groove. The phono cable is made by Canale, and the manufacturer of the armrest is unknown. As for the exterior, there is a slight feeling of use, dullness, etc. on the arms and armrests. Serial 12396 (Murakoshi Yoichi)
Maintenance information: 2022.2.13 maintenance (new dust cover created)
Main specifications: TD-521 belt drive floating system compatible with 33/45/78 main body W550 x H180 x D410 mm 15 kg RMG309 dynamic balance type needle pressure 0 to 7 g total length 408 mm effective length 320 mm overhang 11 mm
The price has been reduced! 2024/4/13 sales price 5,000 yen LINN remote control. Details are unknown, but it is similar to EXOTIK and UNIDISK 1.1 remote controls. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.13 operation confirmed (infrared checked)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. It can be connected, making it convenient when adding tweeters, etc. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/2/8 sales price 6,000 yen internal wiring cable 3.0 m flat single wire with silk shield flat single wire with unusual configuration. How about making your own amplifier etc. (Murakoshi Yoichi)
Maintenance information: 2024.2.8 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
Empire's unknown replacement needle. Very similar for 909E/X, but details are unknown. Since there is no main unit, operation has not been confirmed. There is a feeling of use (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is some paint peeling on the exterior (Kobayashi Hitoshi)
Accessories: none
Stereo standard jack extension cable 3.0 m model number unknown, Sony standard jack extension cable Uses OFC wire and gold-plated plugs. How about an extension cable for headphones (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The price has been reduced. 2024/2/26 sales price 1,200 yen. Unspecified set of 3 wood blocks A wooden block that feels like Yamamoto Sound Crafts's QB-4 is one size smaller. There is a feeling of use (Takasaki Atsushi)
Main specifications: size approx. W40 x D40 x H40 mm approx. 70 g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2023/1/31 sales price 5,000 yen. This is a pair of Pioneer mid-range attenuators. Details of the mounted model etc. are unknown. Operation of conduction only has been confirmed (Murakoshi Yoichi)
Maintenance information: 2022.10.22 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/2/5 sales price 2,000 yen. *Currently sold. Specification details of only one Onkyo full range unit are unknown, but it was able to sweep and make sound. The exterior has dirt, dullness, and tape marks (Katsuji Hiura)
Maintenance information: 2023.2.5 sound output confirmed
Accessories: none
Main specifications: diameter 120 mm, depth 71 mm, screw pitch 219 mm (actual measurement), weight 1.2 kg
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
Audio-Technica model number unknown gold-plated conversion jack. The female side is well made, and the manufacturer's logo is also engraved. There are dull stains all over (Murakoshi Yoichi)
Accessories: none
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
※Cleaning liquid is out of stock. Directional velvet brush with high cleaning performance A convenient wide type that allows you to wipe records in one go. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: unknown brush
Unspecified set of 2 wood blocks 30mm square insulator cube It is similar to Yamamoto Sound Crafts's QB-1, but it is smaller than the QB-1 and the details are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Main specifications: W30 x H30 x D30 mm 28.6 g (actual measurement)
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is a feeling of use on the exterior, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: none
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg