MC cartridge included with the DP-32F. You can enjoy a wide range of sources with bright, punchy sound reproduction with unobtrusive sound quality (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: MC type output 0.3 mV playback frequency 20 Hz to 40 kHz needle pressure 1.8 ± 0.3 g
YAMAHA MC type cartridges. It plays strings and vocals with high transparency and freshness. There is rust on the cantilever (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: 10 Hz to 45 kHz output voltage 0.5 mV impedance 50 ohms needle pressure 2.0 g dead weight 8 g
PSE standard product Power strip for audio The OCB-1 series has a history of 25 years, counting from the first generation. It can be plugged into a 2P wall outlet installed in a general house, making it easy to use (Tamura Eiji)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: 4 ports (125V/15A/3P power plug compatible) W120 x D120 x H60 mm (box part) approx. 0.9 kg
※There is no problem with operation, but it is currently sold because it is cheap. It uses a custom-designed S3 servo that specializes in CD rotation speed, makes it possible to read CD data without loss, and is a CD transport that specializes in high-quality sound playback. Enjoy clear, clear sound that is clear, and clear. As for the exterior, there are dirt, small scratches, etc. on the top plate (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: output system S/P DIF · RCA · Toslink x 1 system W430 × H85 × D315 mm 4.7 kg
※Since it is cheap, it will be handed over as is. It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
D/A converter with a built-in “ES9038PRO.” This model has a compact design, is compatible with MQA, high-resolution, and DSD sound sources, and has excellent cost performance. Desktops etc. are the worst. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, AC adapter
Main Specifications: Input: USB/OPTICAL/COAXIAL/BLUETOOTH USB: 44.1 to 768 kHz/DSD64 to 512 OPTICAL/COAXIAL: 32 to 192 khz W100 x H62 x D192 mm Weight 0.58 kg
RCA cable 0.75 m pair high purity 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. The cable is soft and easy to handle. As for the exterior, there is dullness around the plug (Satoshi Yonejima)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: No accessories
1650 series SACD/CD player It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cable
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
It is a rare shell. It is a special gem that uses rhodium for both shell terminals and shell lead terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: dead weight 17.2 g
In addition to the flat characteristics of DL-103 yuzuri, this MC cartridge is attractive for its transparency and good granularity. Amorphous boron used in high-grade models DL-1000A and 305 is used for the cantilever. The cantilever does not bend, and the stylus is good (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output 0.12 mV playback frequency 20 Hz to 60,000 Hz needle pressure 1.2 g to 1.6 g impedance 40 ohms dead weight approx. 5.6 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
※There is magic writing, and the logo plate is out of stock, so it's cheap. Good stylus! This is the first product of Audio-Technica, an MM type stereo cartridge that became a long-time seller for its well-balanced, natural sound. (MURAKOSHI Yoichi)
Maintenance information: 2024.5.7 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 1.0 to 3.5 g (optimal 2.5 g) playback frequency band 20-21,000 Hz± 3 dB load resistance 50 kΩ DC resistance 450 Ω impedance 1.8 kohm/1 kHz needle tip 0.7 mil dead weight 9.5 g
RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug has no prominent characters, and it is a cable that allows you to enjoy music naturally. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Balance cable, 3.0 m pair, oxygen-free copper, OFC Ritz line type, 2-core shield structure, a quiet, and beautiful sound without falsehood. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of Revisona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Easily switch between 4 speaker systems with one touch. No power required. You can individually play 4 speakers with 1 premain amplifier. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: input/output terminals, one-touch speaker cable terminals x 10 (input 1/output 4, or input 4/output 1), can be connected, amplifier, maximum output, 250 w/ch, external dimensions: H53 x W240 x D182 mm, mass: 730 g
Speaker cable 2.8 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Balance cable, 1.0 m pair, the world's purest D.U.C.C., single conductor, polyolefin insulation. Copper-laminated polyester tape & oxygen-free copper double shielding. The crisp ease of a single line is fully expressed. The exterior has a feeling of use such as dullness or rubbing (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
RCA cable 1.0 m pair with 24K gold-plated turbine plug and split center pin specification, 2-core structure, sheath resistant to aging, and Duraflex jacket. The exterior has a feeling of use and dullness (Tomoho Asae)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The disposal price has been reduced! (Member prices are not applicable) 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-fixed. (*Since it is AC120 specification, a hum sound may occur at 100V)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
The price has been drastically reduced! 2024/4/26 sales price 178,000 yen Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, square peeling, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
Maintained. Elliptical type with built-in step-up transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.4.13 Maintained (broken cantilever, damper adjustment, vibration system replacement)
Accessories: original box needle cover
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
*Needle cover is missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog. There is oxidation and dullness. Serial 534303 (Tamura Eiji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/28 sales price 318,000 yen Denon's popular premain amplifier. It uses the latest generation UHC-MOS FET, which is also used in the predecessor flagship model SX1, and achieves both subtlety and strength at a high level, and drives the speaker firmly. The exterior has a feeling of use such as dullness. Serial 5111500216 (Tomonori Asaine)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: rated output 120W+120W Phono (MM/ MC switching) input x 1 line LINE input x 5 systems EXT.PRE input W435 x H181 x D506 mm 27.4 kg
If you are looking for an AV switch selector, 4 ports, 4 inputs, 1 output, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 continuity confirmed
Accessories: instruction manual, original box
Main specifications: W136 x H43 x D88 mm 231 g (actual measurement)
※Inexpensive because it is in poor condition. Surround system by the brand NIRO by Nakamichi Jiro, the former president of NAKAMICHI. 5.1 channel surround is achieved with a single speaker and subwoofer. A reference model using a full digital amplifier with thorough sound quality measures. You can see a feeling of use on the exterior, stains on the saran net, deposits on the top plate of the woofer, and dullness, scuffs, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 sound output confirmed
Accessories: remote control, instruction manual, upgrade software
Main specifications: 3 input optical systems, 1 coaxial system, 2 analog speaker output 30W x 5ch, subwoofer 50W compatible formats DOLBY DIGITAL, DTS, AAC, DOLBY PRO LOGIC2 speaker 8cm full range sealed 8Ω woofer 20cm cone 6Ω body W200 x H55 x D296mm 2.2 kg, speaker W318 x H117 x D201 mm 3.4 kg, woo Fur W297 x H327 x D297 mm 6.5 kg
If you are looking for a 1.9 m HDMI cable, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been drastically reduced. 2024/5/4 sales price 398,000 yen Glass panel brand new replacement included maintenance! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel dismantling and replacement, meter, illumination lamp replacement, in-board C deterioration replacement, RCA cleaning, SW, VOL cleaning, operation check, backup power supply transformer pattern, relay pattern solder crack correction)
Accessories: remote control, copy of instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
Hi-Fi is in stock for the first time! MM cartridge that uses a boron cantilever and a solid oval needle. It is a delicate tone that is well-balanced from high to low frequencies. The degree is good. (FUJISAWA KOSHI)
Maintenance information: 2024.5.8 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: mm cartridge output 3.0 mV frequency characteristics 20 Hz to 20 kHz needle pressure 1.3 to 1.8 g dead weight 6.7 g
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001612044 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001225830 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
※1 bottle only. Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, dullness, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
The screw terminal block comes with a 4-pole cover, which is useful for extending and distributing speaker cables. The exterior is dull and there is a feeling of use such as writing (Tomoho Asaine)
Maintenance information: 2024.5.7 continuity confirmed
Main specifications: size W70 x H21 x D34 mm
AUTOGRAPH MINI is a masterpiece in the Prestige series. Uses a coaxial unit with a diameter of 10 cm and a baht laminated plywood enclosure. You can experience the small yet well-organized British sound. The exterior is good with little feeling of use due to dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: instruction manual, original box
Main specifications: coaxial 2-way bass reflex bookshelf speaker efficiency 88dB continuous allowable input 50W maximum allowable input 200W input impedance 8Ω crossover frequency 2.3 kHz frequency characteristics 68Hz to 54kHz enclosure material birch laminated plywood enclosure surface finish/solid teak, veneer W210 x H345 x D130 mm 4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/24 sales price 1,180,000 yen genuine Rin Japan product. DS (digital streaming), which has now become mainstream, is named with an acronym such as M (music, movie, multi-source, mobile, multi-user), etc., and not only reproduces PC sound sources via a network, but also becomes a controller that manipulates various sound sources. While it functions as a network player, it has various functions that support everything from analog input to digital input. The exterior has insulator marks on the top plate. Serial 1374093 (Yonejima Satoshi)
Maintenance information: 2024.2.13 operation confirmed (Software Ver. 4.104.518)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: Support files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA compatible sampling frequency: 44.1 to 192 kHz Compatible bits: 16-24 bit Input terminals: Ethernet, 1 XLR balanced input system, 1 Spdif coaxial digital input system, 2 Tos optical digital input systems, 3 HDMI input systems Output terminals: 1 XLR balanced output system, 1 RCA unbalanced output system, HDMI Output (pass-through) 1 system, equipped with EXAKT LINK 2 systems, W350 x H60 x D344 mm, 10 kg
An electromagnetic wave absorbing material is used for the 1.8 m power cable sheath to shut out harmful noises. The plug uses platinum+palladium plating for beryllium copper blades that further improve sound quality and image quality. It features a smooth and delicate sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: No accessories
Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. It comes with an ON/OFF switch for the GEQ function, so you can play easily. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: power cord
Main specifications: input impedance: 500 kΩ output impedance: 330 Ω frequency characteristics: 20 to 100 kHz S/N ratio: 100 dB crosstalk: 80 dB or less W183 x H120 x D88 mm (including knobs and terminals)
USB A-B cable 0.2m Sonotone 6N USB cable specially manufactured by us as a special appendix in the 2012/9 issue of HiVi magazine. It is a product equivalent to the company's 6N/USB-Grandio 2.0 and can be used as a high-class USB cable (Satoshi Yonejima)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: No accessories
The price has been reduced! 2024/5/2 Denon's premium analog player model with a sales price of 99,800 yen. The cabinet with a natural wood veneer semi-gloss finish accentuates the beautiful design. It is a stable player that uses a large die-cast aluminum turntable and quartz lock servo. It is also possible to change the cable and aim for an upgrade. Externally, there are bumps and scuffs on the dust cover. Serial 1066302271 (Fujisawa Yukishi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: instruction manual, power cord, connection cord, head shell
Main specifications: Servo-type direct drive system rotation/33/33/45 rpm wow flutter/ 0.1% or less static balance S-shaped pipe arm effective length 244 mm overhang 14 mm needle pressure adjustment range 0 to 4.0 g compatible cartridge 14.0 to 20.0 g (including headshell) W490 x H178 x D400 mm 14.5 kg
The price has been drastically reduced. 2024/5/6 sales price 118,000 yen Roon Ready, network player compatible with MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. When used as a USBDAC, DSD 22.5 MHz can also be played. Equipped with volume, it can also be used as a digital preamp (Daiki Goto)
Maintenance information: 2024.5.6 operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/25 sales price 998,000 yen The current SME record player has arrived! Similar to the “Model 12A,” it uses a new-generation advanced electronic speed control unit, and detailed speed control is possible. The arm is equipped with the “M2-9R,” which can be said to be the successor to the “3009,” and is compatible with a wide range of cartridges. Please enjoy the one that represents this class. Serial 0075 (Tamura Eiji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: instruction manual (English), belt, power cable, connection cable, original box, IFC weight, stabilizer, head shell
Main specifications: main unit: W420 x H90 x D320 mm Power supply unit: W220 x H85 x D200 mm Weight: 11.4 kg including power supply
The disposal price has been reduced! Members are not eligible for discounts. 2024/4/26 sales price 498,000 yen It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
The price has been drastically reduced. 2024/4/25 sales price 448,000 yen Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant sound is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration replacement, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration replacement, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Serial 646494 (Fujisawa Yukishi)
Maintenance information: 2024.5.7 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The 2.4 m pair of speaker cable uses high-purity OFC (oxygen-free copper), which has little electrical resistance, as the unprocessed core wire, and the stranded wire part is impregnated with a gold colloid liquid with high purity dispersion of ultra-fine gold particles of 3.5 to 8 nanometers, making it a well-balanced sound quality. (FUJISAWA KOSHI)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: No accessories
B&W bookshelf sized speakers It is equipped with a Nautilus tube and Kevlar cone unit from the higher series. This size is sufficient for clean mid to high ranges and low frequencies without any habit. It goes well with modern sauces. The jumper plate is dull, and there is a small scratch on the upper corner (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual
Main specifications: 2 way 16.5 cm woofer 8 ohm bi-wiring connection possible W204 x H356 x D244 mm 6.1 kg