Maintained! A VT-4C single amplifier built into the Suzurando SL-990 chassis. The transformer is equipped with a Tango X-10S pair, MS-210DR, and CH-12-200D. I am overwhelmed by the strong sound pressure that seems to push it to the front. If you combine it with a large horn system, etc., you will be addicted to the pleasure of being bathed in music (Kojima Yosuke)
Maintenance information: 2024.5.2 maintained (relay disassembly repair · block capacitor 47 μF x 2 other deterioration replacement 2 units · resistance 1W deterioration replacement · 3 x ham balance volume addition · resistance 5 W addition · bridge diode addition · power supply switch deterioration exchange · electrolytic capacitor 68 μF noise exchange · 2 film capacitor 1/2 W noise replacement · 3 resistor 1/2W noise replacement · 3 resistor 1/2W noise replacement · Operation check with AC 100V (rated output 12 W, measured at SP: 8 ohm*BIAS and HUM BAL. on the back side have been adjusted. (Please adjust only when the output tube is replaced)
Accessories: power cable
Main specifications: W500 x H270 x D275 mm 36.7 kg (actual measurement, not including protrusions)
Maintained! Line-specific control amplifier with balanced output. The technology cultivated with professional equipment is summarized in a simple configuration. It is a sound that connoisseurs like, with both the amount of information and thickness. There are line scratches on the top plate and dirt and tears on the instruction manual ※The balance output is 3rd hottest (Mizusaki Ryo)
Maintenance information: 2024.5.2 Maintained (cleaning is not possible because each SW and VOL are sealed types. Only detergent spray cleaning from gaps, variations in capacitor capacity within the board → replacement. RCA earth float → cleaning, operation check (the gap cannot be completely removed) *In the future, it will not be compatible if the dedicated parts are defective.)
Accessories: instruction manual
Main specifications: 6 line inputs, 1 balanced output system, 1 unbalanced system, W431 x H95 x D400 mm, 5.9 kg
SACD multi playback player. HDMI compatible A player with a core that looks like it was made by Sony and makes you feel that the range is wide. The high quality that can be relied upon as a playback device in everything is attractive. Equipped with a super audio D/A converter with a DSD filter+multi-level D/A converter system. There are line marks and dents on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: remote control, power cable, copy of instruction manual
Main specifications: [during SACD playback] Playback frequency range 2 Hz to 100 kHz, frequency characteristics 2 Hz to 50 kHz (-3 dB), dynamic range 110 dB or more, total harmonic distortion ratio 0.0012% or less [during CD playback] frequency characteristics 2 Hz to 20 kHz, dynamical clean 100 dB or more, total harmonic distortion ratio 0.0017% or less L [digital output] HDMI x 1, optical x 1 (CD only) [analog output] XLR x 1 ・RCA x 1 W430 x H124 x D390 mm approx. 10.2 kg
Maintained! Single stereo power amplifier using 2A3 output tubes. You can enjoy the aftertaste of sound and air unique to vacuum tubes. It expresses vocals and string music in a sweet and glamorous manner. This is a well-built car at an affordable price. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 maintenance completed (power supply capacitor replacement, RCA jack replacement, cord clamp added to keep unused wire away from heat source, fixed solder defects, vacuum tube pin cleaning, bias check ham balance adjustment, output approx. 4.5 W (current load set to 8 Ω), interior and exterior cleaning)
Accessories: power cable
Main specifications: rated output 3.5W+3.5W vacuum tube 2A3 x 2 6H8C x 2 5U4G x 1 W360 x D210 x H190 mm 16 kg
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/24 sales price 1,180,000 yen genuine Rin Japan product. DS (digital streaming), which has now become mainstream, is named with an acronym such as M (music, movie, multi-source, mobile, multi-user), etc., and not only reproduces PC sound sources via a network, but also becomes a controller that manipulates various sound sources. While it functions as a network player, it has various functions that support everything from analog input to digital input. The exterior has insulator marks on the top plate. Serial 1374093 (Yonejima Satoshi)
Maintenance information: 2024.2.13 operation confirmed (Software Ver. 4.104.518)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: Support files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA compatible sampling frequency: 44.1 to 192 kHz Compatible bits: 16-24 bit Input terminals: Ethernet, 1 XLR balanced input system, 1 Spdif coaxial digital input system, 2 Tos optical digital input systems, 3 HDMI input systems Output terminals: 1 XLR balanced output system, 1 RCA unbalanced output system, HDMI Output (pass-through) 1 system, equipped with EXAKT LINK 2 systems, W350 x H60 x D344 mm, 10 kg
※Saran net is out of stock. The inside and outside including the unit have been refreshed and maintained! It is an attractive L36 with a thick mid-low range expression typical of Alnico. An overhanging, thick analog sound unique to JBL from the 70s. The size is also reasonable, so I recommend it to those who like the American sound of this era. The exterior has been beautifully finished due to maintenance.
Maintenance information: 2024.5.1 maintained (enclosure polishing, oil/wax coating, baffle coating, woofer maintenance: edge replacement, cone paper coating midmaintenance: corn paper tear repair/cone paper coating, center cap dent repair, magnetic circuit gap cleaning/center adjustment tweeter maintenance: center cap dent repair/cone paper coating)
Network maintenance: frequency characteristic check, ATT cleaning, terminal replacement
Detach the unit
Accessories: none
Main specifications: 3-way 3-speaker bass reflex 125A LE5-6 LE25-2 8Ω 89dB natural oak finish W34 x H61 x D35 cm 20.0 kg
One owner item, in excellent condition! Comes with option base JSB-1 (90,000)! The flagship speaker DD66000 commemorates the 60th anniversary of JBL's founding. A high-end machine with a high level of freshness and modern spatial expression. In addition to the low range with a well-extruded core typical of JBL, the texture of the mid to high range is also overwhelmingly high, so you can immerse yourself in the music with peace of mind (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual, short strap wrap, genuine spike base x 8, JSB-1 optional base x 8
Main specifications: Rosewood unit 1501Al x 2/476be/045be-1 playback frequency band 45Hz to 50kHz impedance 8Ω output sound pressure level 96dB W965 x H1,109 x D469mm (without spikes) 142 kg
Luxman's blockbuster MM/MC phono equalizer amplifier is still highly popular. Clean sound with a good S/N ratio with a 3-circuit all-discrete configuration of MC head amplifiers, RIAA amplifiers, and output buffer amplifiers. The sound with excellent gain and a sense of relaxation is attractive. The exterior has dents, small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual
Main specifications: mm/MC independent NF type equalizer gain mm36dB MC62dB input sensitivity mm4mV/MC0.2mV compatible impedance mm10kohm or less/MC40Ω or less input impedance mm50kΩ/mc200Ω w126 × H183 × D421 mm 6.8 kg
Maintained. A Yamaha stereo power amplifier boasting high driving power with a damping factor of 200. The cool panel design and the impressive meter with an orange light are also attractive. Enjoy the hot sound unique to the heyday of audio. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (pre-drive circuit repair. Soldering fixes within each circuit. Bad output relay contact replacement. (Meter lamp power lamp deterioration replacement)
Accessories: none
Main specifications: rated output 120W+120W (8Ω) size W435 x H133 x D380 mm weight 11.8 kg
The price has been reduced. 2024/3/27 Denon mid-range model with a sales price of 45,000 yen. You can enjoy all genres with good modern response and unobtrusive sound quality. Since it is relatively thin, this model is recommended for those who are concerned about space. Phono is compatible with MM/MC. The exterior has small scratches, dullness, dirt, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, power cable,
Main specifications: rated output 70W+70W (8Ω) dimensions W434 x H134 x D410 mm weight 15.5 kg
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
The price has been reduced. 2024/4/5 sales price 99,800 yen Maintained! It is an impressive British Rogers compact speaker with a crisp grain and a sense of density. I was impressed by the fact that this speaker values analog flavor in a range with a sense of moderation without daring to be greedy, such as a sense of volume or scale in the low range. Serial 1247 (Asaine Tomoho)
Maintenance information: 2024.4.5 maintained (exterior cleaning/repair saran frame painting/net replacement woofer maintenance (edge softening treatment, center misalignment adjustment on one side))
(Detachable unit)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 2 speakers sealed bookshelf type 45W W190 x H302 x D162 mm 5.0 kg
Maintained by the manufacturer! A record player equipped with DP-3000 and DA-307 in a marble cabinet. The phono motor, which has a reputation for its highly accurate rotation and smooth sound quality, and the sturdy marble cab reproduce a heavy and rich analog sound just like the exterior. One with excellent cost performance. The dust cover has line damage, and the rubber mat has deteriorated (Oikawa Tetsuji)
Maintenance information: 2024.4.24 manufacturer maintained (TR replacement with black and rusty feet. speed adjustment, sound output test)
Accessories: none
Main specifications: [DA-307] static balance dynamic damping type total length 332 mm overhang 14 mm compatible cartridge dead weight range 5 to 10 g [DP-3000] servo type direct drive solid rotor type torque motor 33/45 rotation dimensions W530 x H183 x D440 mm total weight approx. 20 kg
* Although it can be operated with a remote control, it is inexpensive because it makes abnormal noise when operating the volume, and is currently sold. Entry machine for Marantz primain amplifiers. You can enjoy good sound in a compact size with a smart design and well-balanced sound quality. There are scratches around the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.1 operation confirmed (can be operated with a remote control, but it makes an abnormal noise when operating the volume)
Accessories: remote control, instruction manual
Main specifications: rated output 40W+40W (8Ω) line input/3 systems (CD, TUNER, AUX/DVD), tape input/output/2 systems (RECORDER 2 systems) dimensions W440 x H117 x D341 mm weight 6.6 kg
The price has been drastically reduced! 2024/4/23 sales price 45,000 yen*Saran net is out of stock. ALR JORDAN's smash hit. The sound quality is outstanding at this size. The impression is that the volume does not change from low volume to quite high volume, and the sound is on a large scale not typical of a small speaker. There are small scratches and dullness. Serial 25230149, 25230149 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: No accessories
Main Specifications: 2 Way 2 Speaker Sealed Usage Unit 11.5cm Metal Cone Woofer/25mm Soft Dome Tweeter Rated Input 90W Frequency Characteristics 70 to 30,000 Hz Impedance 8 Ω Output Sound Pressure Level 86 dB (2.83 V/m) Recommended Amplifier Output 25 to 150 W Crossover Frequency 2,800 Hz Enclosure Natural Alloder Material Finish (with Screw Holes for Brackets) Dimensions W137 × H220×D190mm weight 3.0 kg
Maintained in 2019! AC100V specification This is the 5th generation SL-1 vacuum tube control amplifier, which is highly evaluated overseas. The sound potential of vacuum tubes has been maximized by thorough noise countermeasures, such as making the special coating inside the chassis non-magnetic and separating the power supply. A rotary resistor with a silver contact is used for the volume, so there are no omissions. There is a dull feeling of use throughout the exterior. Serial 005014 (Fujisawa Yukishi)
Maintenance information: 2019.2.23 manufacturer maintained (stepped VR control contact cleaning. Repairing the power transformer attachment. (I can't get the balance gap)
Accessories: instruction manual (English), power cord (non-genuine)
Main specifications: 3 line inputs, phono inputs: 2 MM compatible output systems, external dimensions: main unit W483 x H133 x D340 mm power supply W310 x H115 x D175 mm Weight: 34.8 kg (main unit, power supply)
2 pcs per pair A convenient plug adapter for tight spaces or when you want to convert. There is oxidation on the exterior (Yonejima Satoshi)
Accessories: No accessories
The disposal price has been reduced (member prices are not applicable). 2024/4/20 sales price 168,000 yen with original box A highly complete pre-main amplifier featuring Marantz's clear, glossy expression. The range is wide and thick, and you can choose any music genre. The fact that it supports balanced input is also attractive. There is a small scratch on the lower part of the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 100W+100W, 3 line inputs, 2 tape terminals, PHONO (MM/MC) balance input, W440 x H165 x D444 mm, 26 kg
The price has been drastically reduced. 2024/4/28 sales price 118,000 yen Vienna Acoustic tall boy speaker. The low frequencies are modest, but you can enjoy the supple, transparent sound typical of Vienna acoustics. There are no major noticeable scratches, but there is a part of the foot that looks like it has faded on one side. There is stickiness in the back duct port (Oikawa Tetsuji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: spikes
Main specifications: 4Ω 90dB W188 × H878 × D250 mm 19 kg
Comes with original box and straight pipe included! This is a masterpiece long arm with one-point support, static balance, and oil dump system. The light arm movement and the sense of balance between the delicate high range and the power of the mid to low range are excellent (Sasaki Shota)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: original box, manual, phono cable, straight pipe, subway
Main specifications: static balance type, total length 333 mm, effective length: 237 mm, overhang: 15 mm, needle pressure range: 0 to 3 g (0.25 g steps), compatible cartridge, dead weight: 3 to 17 g
Center spindle oil for TECHNICS SP-10MK2. Lubricating 2-3 drops once every 2000 hours is sufficiently effective (Asaine Tomoho)
Accessories: original box
Maintenance has been completed, including removal of internal glass fogging! The company's first model equipped with a digital panel. The sense of S/N has increased, and the sound is deep enough to be compatible with modern speakers. The high range has also been widened, and while every band remains clear, it makes you feel the thickness typical of McKinn. Detailed settings are also possible with the 8-band equalizer. (MIZUSAKI Ryo)
Maintenance Information: 2024.4.30 Maintained (glass panel fogging cleaning. 8 Tone VR ✕ pieces have been disassembled and cleaned.
Operation check OK)
Accessories: power cord, remote control, instruction manual
Main specifications: digital volume type 8-band equalizer line input 9 systems (RCA x 8/XLR x 1) phono (MM) input 1 system line output 3 systems (XLR/RCA) W445 x H150 x D470 mm 11.5 kg
This is a super dreadnought mono power amplifier. Recommended for those who want to drive large speakers! The sound quality is natural and clearly expresses delicate parts. It is a power amplifier that has driving power and allows you to feel comfortable and at ease. There are small scratches on the exterior, but it is generally good (Ryo Mizusaki)
Maintenance information: 2024.4.30 Maintained (meter acrylic removed, internal glass fog cleaning, all front lamps replaced. (Check that the lamp is on)
Accessories: power cord, instruction manual
Main specifications: 1200W (2/4/8 Ω) speaker output 1 system x 3 (2 ohm x 1, 4 ohm x 1, 8 ohm x 1) input terminal RCA x 1 system, XLR x 1 system, W445 x H313 x D540 mm 66.7 kg/unit
Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals!
Accessories: original box
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
Jumper cable, 0.2m, set of 4, silver conductor (PSS), banana-Y lug terminal specification, there is dullness around the plug (Kojima Yosuke)
Accessories: none
ALTEC monitor speaker system. The unit configuration is similar to CARMEL. The mid-low range, which has a sense of volume like CARMEL, is slightly thin, but you can enjoy the sharp Altec sound. There is an attenuator gap, but there is no problem playing music (Daiki Goto)
Maintenance information: 2024.4.30 The exterior bottom has been repaired and painted
Accessories: none
Main specifications: 2-way 3-speaker unit configuration/802-8T, 414-16B x 2, N-800-F dimensions W788 x H610 x D488 mm weight 43 kg/book
RCA cable 1.0m pair revision B type signature series There is little dramatization in the tone, but you can enjoy a spectacular sound field feeling as if the speaker size has been larger by one size or more. There is dullness on the plug (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, hybrid conductor centered on 7N copper, the contact part is a standard model that uses rhodium plating. The cable has a sense of sound pressure in the mid-range and has characteristics suitable for jazz. There is dullness in the plating ring around the plug (Kojima Yosuke)
Accessories: none
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
Refreshed and maintained with internal and external maintenance! The clear and dynamic sound quality, and the deep, powerful sound of 123A is more powerful than its size, and makes you enjoy jazz and rock excitedly. This speaker is perfect for playing jazz on records (Yonejima Satoshi)
Maintenance information: 2024.2.28 Maintained (enclosure polishing/oil/wax coating, baffle painting. Maintenance: frame polishing/oil finish, net replacement. Woofer cone paper paint. Tweeter maintenance: New urethane ring created, frame cone paper coating. Network maintenance: frequency characteristic check, ATT disassembly cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main specifications: 2 way 2 speaker bass reflex bookshelf type unit configuration high range LE25 (3.6 cm) + low range 123A (30 cm cone) impedance 8 ohms crossover frequency 2 kHz dimensions W360 x H600 x D 300 mm weight 20 kg
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg
Maintained by the manufacturer. A VRDS collaboration model incorporating DAC7, a Philips DAC. It is a player with a high degree of perfection that successfully combines the certainty of a TEAC skeleton with a PHILIPS DAC. You can see the high degree of perfection, where you can feel that it is tight and supple. There is dullness and small scars (Oikawa Tetsuji)
Maintenance information: 2024.4.20 Maintained by the manufacturer (belt replaced, other parts replaced, and various parts inspected and adjusted)
Accessories: remote control
Main specifications: VRDS Mecha Philips DAC7 analog output 1 system digital output 2 systems W442 × H149 × D331 mm 10 kg
The price has been reduced! 2024/4/28 sales price 89,800 yen Maintained! You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. The exterior has a feeling of use, such as dullness and paint peeling. Serial 10904 10896 (Hiroki Aso)
Maintenance information: 2024.4.27 Maintained (center cap replacement, corn paper coating, edge damping agent applied)
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
A unique structure in which ribbon-shaped conductors using 1.0m pair collet chucks for RCA cables are arranged spirally on the outside of SVPE insulation. As a result, there is no extra cushioning on the positive side and negative side. The resolution is high and the low-frequency expression is excellent. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Maintained! An exclusive popular preamp. It is packed with attention to communication from engineers, such as the quadruple attenuator volume with 22 contacts and the use of copper foil glass epoxy substrates. Oxygen-free copper wire is used as internal wiring material. The abundance of inputs, such as 3 PHONO systems and 3 AUX systems, is also attractive. The high quality, which is thick and roomy, is attractive. There are scratches and scratches on the exterior. Serial 001000885 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (all lever switch disassembly contacts polished contact grease coated. Rotary switch contact cleaning. Check the operation of each input/output. (Capacitors have been maintained)
Accessories: No accessories
Main specifications: 22 contact attenuator PHONO 3 system TUNER 1 system AUX 3 TAPE system 3 stage switchable attenuator dimensions W468 x H206 x D342 mm weight 12.5 kg
※Because it smells like tobacco, it's cheap. Maintained! Custom edition of the large power amplifier PA-70 from the STASIS circuit. Supported by a huge 700W toroidal transformer, the speaker driving power, which consists of a 90A power supply, is one of the best among domestic amplifiers. Fortissimo, which excels at delicate depictions but doesn't make you feel limited, is unique to this large amplifier. The exterior is dull and scratched. Serial 11179 (Fujisawa Yukishi) A
Maintenance information: Maintained on 2024.4.26 (bias part and constant current part semi-fixed VR, output relay, and damaged screws were replaced, additional installation due to lack of cable protector, solder crack correction, bias and offset adjustments, output sound check, dirt removal and cleaning)
Accessories: No accessories
Main specifications: rated output 225W+225W (8Ω) W435 x H200 x D421 mm approx. 28.5 kg
Maintained by the manufacturer! This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. There are multiple scratches on the top plate. The LCD is slightly dark (Sasaki Shota)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test)
Accessories: remote control, copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
*Remote control is out of stock. Maintained! It is a control amplifier that supports digital input in addition to analog input. The simple mechanical design is also good. The sound quality is also attractive, with a relaxed, highly transparent sound typical of Yamaha. There are dullness and dents (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (disassemble switches such as PHONO selectors, polish contacts and apply contact cleaner. The preamp circuit, power supply circuit, and all other circuit board soldering were corrected. Digital input sound output check OK. (I/O pin jack polish)
Accessories: instruction manual
Main specifications: 8 digital inputs PHONO (MM/MC), 18-bit operation, built-in twin D/A converter, W473 x H130 x D400 mm, 12.2 kg
This step-up transformer is ideal for SPUs, etc. It is an MC transformer with excellent thickness and sense of energy, and fully brings out the characteristics of cartridges. (Sasaki Shota)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: original box
Main specifications: input impedance 2 to 6 ohms boost ratio 28 dB load impedance 47 kΩ or more channel separation 80 dB (1 kHz) dimensions W80 x H40 x D128 mm weight 400 g
Speaker cable 5.0 m pair M.C.CS 122 HYBRID is a Vandenhall speaker cable using a parallel multiple stranded wire structure. It is a character that carefully conveys musical expression and gives depth to the expression of European speakers such as Tannoy, as well as domestic speakers. Rubbing on the sheath
There is dirt (Kojima Yosuke)
Accessories: none
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg