Dayton Audio's small power amplifier. Designed to be just the right size for a desktop, this is one that can be loud enough for a small speaker. It also has a headphone jack, so it can also be used as a headphone amplifier. The exterior is dull. Serial V200004300 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: AC adapter
Main specifications: 60W+60W (4Ω) W117 x H44 x D79 mm dead weight 1.23 kg
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Maintained! SPU round needle type with built-in transformer. This is a shell from the Knicks era. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. Needle cover missing. The exterior has a feeling of use such as dullness. Serial 340898 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 Maintained (cantilever, damper adjustment, rubber cover replacement, cleaning)
Accessories: none
Main specifications: MC type with built-in transformer output 10 mV needle pressure 3 to 4.5 g dead weight 32 g
Technics MM Cartridges It was adopted as an accessory to the company's record player. It has a neutral, deafening sound, and is compatible with various music genres (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV frequency range 20 to 25 kHz needle pressure 1.75 g dead weight 6 g
Denon's premium analog player. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
Comes with a power unit (GKP04). NF type phono equalizer with built-in MC head amplifier. The sound quality is slightly softer with lower distortion than the CR type. You can enjoy analog playback of an introductory pre-main amplifier more deeply. *The manufacturer recommends an output of 0.3 mV or more for MC, and the mm gain is 45 dB. Serial No. 718 (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: mm/MC switching input resistance mm/47 kΩ, MC/approx. 200 ohm W120 x H25 x D120 mm power supply unit W120 x H25 x D120 mm
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are unique to mono (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 6.8 g
Manufacturer's maintenance completed! Denon's highest-model phono motor at the time. They are orthodox and have a high sense of stability, such as a turntable with a double structure and DENON's traditional AC servo motors. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 manufacturer maintenance (head gap adjustment, micro SW replacement, power circuit capacitor, strobe lighting circuit capacitor replacement, etc., inspection operation test of each part)
Accessories: none
Main specifications: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, die-cast aluminum turntable, compatible with 33 and 45 rotations, approx. 10 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
YBA's rare power amplifier is in stock for the first time at Hi-Fi! Uses a large double power transformer and an original Motorola power transistor. Engineers who were in charge of design at Goldmund are in charge of production, and the sound field is large. It is an amplifier with a very high degree of perfection, with precise tone, medium and low frequencies with intonation, etc. The exterior has dullness, threads, etc. (YONEJIMA Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cord
Main specifications: 85W+85W (8Ω) 170W+170W (4Ω) W430 × D330 × H132 mm,22 kg
This is a small SUPEX level gauge that is easy to use. Having one is convenient for leveling a record player (Kobayashi Hitoshi)
Accessories: none
Main specifications: actual size: diameter: 22 x height: 20 mm, dead weight: 10 g
This is Belldream Cartridge Keeper BD-CK2A. It comes with a headshell and can hold 2 cartridges. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 ✕ H120 ✕ D90mm 160g
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
* There are adhesive marks on the main body, the tweeter is dead, etc., so it is inexpensive and is currently sold. If you're a Technics fan, you should try the SB-7000 at least once! It is made with a linear phase design and expresses excellent directivity. Although it is flat and has a wide range, it is highly efficient, so it can handle a full range of genres regardless of the amplifier. The exterior has adhesive marks, dirt, and small scratches. Shipping costs will be estimated separately (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 3-way bass reflex 6Ω 93dB linear phase speaker system W480 x H845 x D410 mm 36 kg
Comes with original box This is the third headphone in the Hifiman sealed series. Inheriting the traditional goodness of the classic model SUNDARA, it has achieved a large sound field that looks like an open type while being sealed. I have the impression that it mellows down from low to high frequencies. It is in good condition with little feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: original box, connection cable
Main specifications: sealed type 20Ω 98dB 432g
Unspecified pair of black granite boards. There are slits in the front and back that seem to be for tuning purposes. If you're looking for this size, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W245 x H15 x D245 mm 2.8 kg
Unspecified head shell. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 11g
SANSUI headshell Model number and details are unknown. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 9g
*Currently sold. DAITO Voice 16cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box
Main specifications: 8Ω 10W maximum 15W 16cm full range
*Currently sold. DAITO Voice 10cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 Operation confirmed
Accessories: original box
Key Specifications: 4Ω 15W 10cm full range
The price has been reduced! 2024/5/27 sales price 748,000 yen, beautiful item with original box, first arrival at Hi-Fi! A belt drive analog player equipped with a completely original tone arm and extreme performance. The combination of a newly developed original tone arm with extremely high initial motion sensitivity using knife-edge bearings, a quiet DC motor supported by a powerful power source, and a belt drive system brings an emotional playback sound with high fidelity. The exterior is generally good. Serial M30500158 (Tomonori Asaine)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box, instruction manual, handle, hex wrench, power cable, phono cable, EP adapter
Main specifications: belt drive system, rotation speed 33/45/78, switchable platter mass 5.2 kg, tone arm type, static balance, S-shaped universal type, knife edge structure, effective length 256 mm, overhang 16 mm, compatible cartridge 4 to 11 g (17 to 24 g with attached headshell), height adjustment range 22 g, anti-skating 0 to 4 g, power supply voltage AC100V (50/60 Hz) power consumption 5W external dimensions W491 x H128 mm (from bottom to top of turntable) x D399 mm mass 24.8 kg (main body)
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. There is slight dirt and a feeling of use. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, needle cover
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
A cartridge that makes you feel delicate and just the right amount of warmth. The SPU has symmetrical sound quality, and expresses classical music etc. with a high sense of transparency and beautiful tone. ※ There is a small crack in the case, and there is writing on the original box. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box, case
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 Ω internal impedance 3 Ω dead weight 7 gMC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 Ω internal impedance 3 Ω dead weight 7 g
The higher model of the DL-103. Wide range was measured, and 20 Hz to 70 kHz was achieved. Delicate, wide, and powerful sound quality. There is slight dirt and a feeling of use. ※There is a note on the original box. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output 0.2 mV playback frequency 20 to 70,000 Hz impedance 40 ohms needle pressure 1.2 g dead weight 6.5 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
An audiocraft headshell that uses a perfect lock pin in addition to its sturdy construction with a hard aluminum molding. It has a degree of perfection that even feels beautiful in form, and the connections are solid, bringing out the full performance of the cartridge. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: Perfect Lock pin, hard aluminum molding, dead weight 13.7 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
SAEC headshell. Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. There is a screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
A classic Technics headshell. Aluminum die-cast body with excellent vibration damping properties (Oikawa Tetsuji)
Accessories: screws
Main specifications: Weight 9.2 g
Sony die-cast aluminum shell. While it is sturdy, it has a smart design and is easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: die-cast aluminum, 10.5g dead weight
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Ryo Mizusaki)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
This is an MC cartridge for Hyundai Orthophone. You can enjoy the bright, sharp sound at a low cost. I also recommend it as an introduction to orthophones (Mizusaki Ryo)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: needle cover
Main specifications: MC cartridge output voltage 0.5 mV frequency band 20 Hz-25,000 Hz diamond needle aluminum cantilever suitable needle pressure 2.3 g dead weight 9 g
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but the location mechanism that allows you to move it to the desired position and play is convenient, so you can easily enjoy analog. There is a feeling of use such as button corrosion and dullness (Daiki Goto)
Maintenance Information: 2024.5.25 Maintained
Accessories: M44G, EP adapter, instruction manual
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
A direct drive record player equipped with an Orthophone 2M RED as standard equipment. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (there are times when it is not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
Maintained! Mono cartridge OFD25 initial type for EMT arms. The sound quality is clear and tight, and it has a strong thickness unique to mono. While it has a characteristic European luster that can be seen at every end of the sound quality, it reproduces the sound of the source without coloring. *Since it is mono, the output is Rch only, so please use the amplifier's mono switch. The exterior is dull. Serial 7199-00 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (cantilever bending correction)
Accessories: original box
Main specifications: MC type needle tip diameter 25 μm diamond needle impedance 37 Ω (right output) needle pressure 5 g output voltage 1.15 mV frequency characteristics 30 Hz to 15 kHz tracking angle 90 degrees dead weight 33 g
Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
※It is inexpensive because it has a lot of feeling of use. A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior has a feeling of use such as fading due to aging (Kanai Hidetsugu)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Maintained! Grad's rare wooden tonearm, which received rave reviews in stereo sound magazines, is now in stock. The beautiful curves and sleek design of the gunstock type walnut are excellent, and it is an arm that is the cornerstone of the Fifty's Sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintenance completed (arm side lead wire shell terminal solder repair output terminal 5P connector RCA terminal replacement cartridge installation simple check conductivity check)
Accessories: none
Main specifications: Dynamic balance type 0.5 kg (actual measurement)
* There is no remote control, and there is no problem with the current operation, but since it is inexpensive, it is a CD player equipped with a K2 interface circuit, has plenty of functions, and is also attractive in terms of ease of use. It eliminates digital distortion caused by jitter (time difference distortion), ripple (waveform distortion), etc. There are threads and small scratches on the exterior, and deterioration can be seen on the inside of the tray (Kojima Yosuke)
Accessories: copy of the manual
Main specifications: W435 x H115 x D375 mm 9.3 kg
It's a small digital interface that fits in the palm of your hand. The input uses a Type-C USB interface. The output is I2S/optical/coaxial. The sampling rate is PCM32 bit/768 kHz compatible, DSD native, DOP64 compatible (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: original box, connection cable
Main specifications: W80 x H13 x D60 mm dead weight 120 g