The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The FOSTEX 20cm double woofer enclosure D-70 is a plywood cutting service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in a stereo magazine at the time by Musico-no-Tomosha, and this is not a genuine assembly kit. There is no difference in dimensions or materials. Wiring, SP terminals, detailed instructions, etc. are not included. If you understand it, if you are a self-made person, how about DIY this summer!? * The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications: Backload enclosure for 20cm double woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight about 93.6 kg
The price has been reduced. 2023/11/15 Sales price 8,000 yen Center speaker stand from unknown manufacturer. It is a type that is easy to handle with wooden casters. There are threads on the exterior. (Miura Kimiya)
Accessories: No accessories
Key Specifications: W570 ✕ H225 ✕ D440mm 4kg
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The price has been reduced. 2024/2/24 sales price 6,000 yen ※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep test good
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
*Lead wire is missing. Victor's 70s logo is also a stylish headshell. The screw hole is long, and the overhang can be easily adjusted. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: No accessories
Main specifications: aluminum stamping dead weight 9.5 g
This model is a new reference for Technics' direct drive turntable systems. Stable rotation and reduced vibration are achieved by adopting a coreless direct drive motor. Please enjoy the moment of interacting with music through the rich sound of analog records with this model. There is a thread on the dust cover on the exterior. Serial GM2fa001044 (Fujisawa Yukishi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: instruction manual, power cord, connection cord, 2 types of auxiliary weights
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
Maintained in August 2022! A record jacket-sized masterpiece player that went on sale to commemorate the 10th anniversary of Direct Drive. The cartridge comes with the company's EPS-24CS replacement needle. Not only does it have a compact design and a repeat function, but it also has a mute function for a while after the needle falls, automatically detects the size of the board, and can also be used at an angle or upside down, making it a very convenient gem. Serial DA1629M222 (Takasaki Atsushi)
Maintenance information: 2022.8.30 Maintained (grease up motor bearings, linear tracking drives, tone arms and arm lifters. Replacing deteriorated electrolytic capacitors. The internal lighting was changed to a light bulb color LED. Various SW disassembly contact polishes. Create a driving rubber belt. Phono cable cable creation. Check the turntable rotation speed. Check arm needle pressure. Check the sound output. Simple exterior cleaning, comprehensive operation confirmation inspection.)
Accessories: copy of manual, phono cable, power cable, EPS-24CS
Main specifications: quartz lock direct drive MC head amplifier built-in linear tracking fully automatic player W315 x H88 x D315 mm 6.5 kg
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of aluminum die-cast with high rigidity, and brings out the characteristics of the cartridge (Hiroki Aso)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Genuine headshell included with Technics SL-1200mk7 etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
The price has been drastically reduced! 2024/4/28 sales price 118,000 yen Roon Ready, network player compatible with MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. It also plays DSD 22.5 MHz when used as a USBDAC. Since it also has volume, it can also be used as a digital preamp. The exterior is slightly dull and has a feeling of use. Serial 18Y0265 (Yamato Yuki)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: Remote control instruction manual copy power cable (general purpose)
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The price has been drastically reduced. 2024/5/6 sales price 118,000 yen Roon Ready, network player compatible with MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. When used as a USBDAC, DSD 22.5 MHz can also be played. Equipped with volume, it can also be used as a digital preamp (Daiki Goto)
Maintenance information: 2024.5.6 operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
The price has been drastically reduced! 2024/4/29 sales price 108,000 yen This is a TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. There are no noticeable scratches and it is in good condition. Serial 20Z0002 (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Input: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Comes with original box! Currently sold. The urethane inside has deteriorated, so it has been removed. Stax headphone and amplifier set. You can enjoy a very grainy and fresh tone. (Sasaki Shota)
Maintenance information: 2024.5.6 operation confirmed
Accessories: original box
Main specifications: Playback frequency band 30 to 35,000 Hz sensitivity 94 dB SRD-7MK2: W73 ✕ H120 ✕ D215mm weight 1.5 kg
Mini plug to standard jack plug adapter Useful for connecting headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/4/2 sales price 250,000 yen ※We have newly created head amplifier modules ✕ 2, Phono equalizer modules x 2, and flat modules x 2. Maintained! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight Sony sound with a sense of speed similar to the TA-E900. I want to use the look and sound in combination with the company's Power TA-N902. The exterior has small scratches and is dull. Serial 200499 (Takasaki Atsushi)
Maintenance information: 2023.4.2 Maintained (2 flat modules replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2023.1.5 Maintained (Phono equalizer module x 2 replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2022.8.31 Maintained (head amplifier module ✕ 2, capacitor, semi-fixed resistor, relay, LED, lamp, Capcom, power cord replacement. All SW, VR disassembly and cleaning. Re-solder the deteriorated part of the solder surface of the board. Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting a power amplifier.)
Accessories: copy of instruction manual
Main specifications: 2 phono inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The price has been reduced. 2024/3/12 sales price 49,800 yen Maintained! Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (The inside of the main unit was cleaned and the wall escutcheon cleaned. The dial transmission part has been corrected due to thread entanglement on the dial flywheel part. RF section tracking, meter instructions, and MPX detection have been adjusted. (Reworked and corrected due to poor contact (glare) in the output level volume)
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
Standard plug to RCA cable 2.0m used for transmission from a headphone output such as a deck to an RCA input such as an amplifier (Yoichi Murakoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Stereo standard jack extension cable 3.0 m model number unknown, Sony standard jack extension cable Uses OFC wire and gold-plated plugs. How about an extension cable for headphones (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The disposal price has been reduced! (Member prices are not applicable) 2024/4/25 sales price 998,000 yen The current SME record player has arrived! Similar to the “Model 12A,” it uses a new-generation advanced electronic speed control unit, and detailed speed control is possible. The arm is equipped with the “M2-9R,” which can be said to be the successor to the “3009,” and is compatible with a wide range of cartridges. Please enjoy the one that represents this class. Serial 0075 (Tamura Eiji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: instruction manual (English), belt, power cable, connection cable, original box, IFC weight, stabilizer, head shell
Main specifications: main unit: W420 x H90 x D320 mm Power supply unit: W220 x H85 x D200 mm Weight: 11.4 kg including power supply
Shure's final high-end cartridge model. It has a smooth sound that is different from the thick, jazz-friendly series, and vocals and classical music are carefully reproduced. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: mm type oval needle frequency band 20 Hz to 22 kHz needle pressure 0.75 to 1.5 g (appropriate 1.25 g) dead weight 7 g
The price has been reduced! 2024/4/23 sales price 12,000 yen This is a Shure mid-size model equipped with a solid diamond needle. The resolution is high, and the cuts and crisp sound with a sense of energy in the high frequencies are attractive. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.4.23 sound output checked
Accessories: none
Main specifications: mm cartridge output 4.0 mV needle pressure 0.75 to 1.5 g frequency characteristics 20 to 20,000 Hz dead weight approx. 6.5 g
Rare SHURE's highest peak cartridge ULTRA 500! The high resolution that challenges the limits of MM and high compliance without compromising the sharpness typical of SHURE is attractive. The cantilever is slightly to the left (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV needle pressure 1.2 g 10 to 35,000 Hz beryllium micro wall cantilever dead weight 10 g
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
The price has been reduced! 2024/5/2 sales price 278,000 yen Maintained in 2022! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. The exterior has bumps, line scratches, and corrosion on the back. Serial 604090021 (Fujisawa Yukishi)
Maintenance information: 2022.3.20 maintained (main amplifier circuit output relay replacement, headphone relay replacement, power supply transistor replacement, protector section transistor replacement, solder repair, input selector, power amplifier direct, source direct, tape, reck out switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, offset adjustment, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The price has been reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches at the same time (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
BNC cable 1.0m digital BNC cable from leading British cable manufacturer QED. Uses pure silver coated 5N copper (Kanai Hidetsugu)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: original box
Coaxial cable 1.0m digital coaxial cable from leading British cable manufacturer QED. Made of pure silver-coated 5N copper. There is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: original box
Coaxial cable 1.0m digital coaxial cable from leading British cable manufacturer QED. Made of pure silver-coated 5N copper. There is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: original box
This is an MM cartridge used in Pioneer record players such as the PL-12, PL-12E, and PL-A20. The sound quality is straightforward without any habit, and you can use it easily.
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 2.5 to 3.5 g playback frequency band 15 Hz to 20 kHz dead weight 6.8 g
Pioneer perforated headshell Carbon fiber molding The shell is lightweight, has just the right length on the finger, and is easy to use. The exterior has a feeling of use such as dullness (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: dead weight 8.7g
The basic structure of the 1.0 m pair of balance cables remains the same as the previous model, and Oyaide is proud to refine the precision conductor 102 SSC with patented technology 3E twisting. There are dirt and threads on the exterior (Tomonori Asae)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: No accessories
※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories