The price has been drastically reduced. 2024/1/20 sales price 99,800 yen ※The output terminals have been remodeled and 1 system has been added. This D/A converter has an impressive natural and supple texture. Another DAC board has been added to lock up to 48kHz. Equipped with a TOS optical input terminal, it is equipped with an Analog Devices 20-bit resolution DAC chip. It contributes to a rich amount of information. Soft and warm sound (Sasaki Shota)
Maintenance information: 2024.1.20 Operation confirmed
Accessories: power cord, BNC conversion plug
Main specifications: 20 bit 8 times oversampling 32 kHz, 44.1 kHz, 48 kHz digital input = BNC3 system, optical 1 system digital output = BNC1 system, TOS optical 1 system analog output = RCA1 system size W483 x H65 x D312 mm 5.5 kg
A single-by-wire rocket series entry model with a 3.0 m pair of banana plugs at the end of the speaker cable. Divided into 4 conductor paths, the sound quality is more dynamic with a structure that suppresses malignant interactions that occur between the 2 conductors. Also, although it is composed of a semi-single-wire conductor arrangement, it has a highly flexible cable structure. There are abrasions etc. on the sheath (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced. Member prices are not applicable. 2024/3/21 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use appropriate for the model year, such as line scratches on the top plate, rubber footprints, and overall dullness (Mizusaki Ryo)
Maintenance information: 2024.3.21 maintained (internal Tn, C, R check, Tn OK, gain setting C, DC cut C, etc. → replacement, DINININPUT connector replacement, cable creation ~ operation check)
Accessories: power cord, connection cord, copy of instruction manual
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/22 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use such as dullness. Serial 41000 (Tomoho Asaine)
Maintenance Information: 2024.3.22 Maintained! (Internal check DC cut C, gain setting C, etc., exchange Tr, etc. check operation check, DIN4P-RCA female cable creation)
Accessories: power cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The basic structure of the 1.1 m pair end of the speaker cable remains the same as the previous model, and it is a speaker cable with excellent cost performance made by making the 102SSC precision conductor precise with patented 3E twisting technology. There is a feeling of use such as threads and dirt on the sheath (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: 102 SSC conductor 1.25 SQ (37 strands/3E strand) outer diameter 3.5 x 8.0 mm
An introductory cable with 1.5 m pair untreated ends that are soft and easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Maintained! Pre-main amplifier with built-in DA converter. An amplifier that allows you to enjoy a gentle, expansive sound like Denon with analog input, and sound quality with a wide range with digital input. This amplifier can also be recommended as an amplifier to be combined with PC audio (Daiki Goto)
Maintenance information: 2024.2.21 maintained (function, recout, digital input, speaker, tape, loudness switch disassembly, polishing grease application, output relay replacement, bus volume replacement, solder repair, various volumes, switch cleaning, interior and exterior inspection and cleaning, digital input/output confirmation, operation confirmation. (*Since the bus volume is similar, the bus lifts slightly when the source is directly off)
Accessories: none
Main specifications: 110W+110W (8Ω) phono (MM/MC switching) 5 digital input systems (coaxial x 3/optical x 2) W434 x H180 x D420 mm 18 kg released in 1989 (Kojima Yosuke)
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/13 sales price 128,000 yen ※The PHONO board is for MC only (MM cannot be used). Maintained! It has an elegant and glossy tone, and although combinations with 405 are common, 606 etc. are also a good match. It has the natural texture of the acoustic sauce and the smooth tone that feels good against the skin. There are small scratches and paint peeling on the right side. Serial 24151 (Takasaki Atsushi)
Maintenance information: 2024.4.12 maintenance (main board ground point screw reprocessing, operation check) 2024.1.17 maintenance (replacement of coupling C, bypass C, etc. in each board, AC SW spark killer C replacement, INPUT switching analog SW through hole pattern re-soldering, power SW internal contact polishing ~ operation check)
2020.6.13 Maintained (balance VR, SW disassembly cleaning. Attach 1 kΩ resistors to both the left and right sides of the flat board. Replaced due to faulty IC. All flat and mother boards have been soldered again. (Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting the power amplifier to confirm normal operation.)
Accessories: power cord, copy of manual
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
The price has been drastically reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
The price has been reduced. 2024/4/17 sales price 34,800 yen ※Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price. Inside Force Canceller B is out of stock
Maintenance information: 2024.4.13 sound output confirmed
Accessories: phono cable
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The price has been reduced! 2024/4/27 sales price 39,800 yen*Inexpensive due to cigarette smell, remote control shortage, etc. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
The price has been reduced. 2024/4/29 sales price 110,000 yen The 3 channel 5 units are nicely put together in one package. In addition to the fact that a rich sound field can be simply played back via Bluetooth, etc., it is a product with an emphasis on functionality that can also be enjoyed with analog. Recommended for studio users. Other than the exterior and stains on the top plate, it's fine (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: remote control, power cord
Main specifications: 33mm pure pulp cone woofer x 2, 25mm aluminum dome tweeter x 2, 100mm pure pulp cone center midrange x 1 input HDMI (ARC), 3.5mmAUX, RCA Phono (MM), Ethernet/WiFi Bluetooth playback frequency characteristics 45Hz to 25kHz (-6dB) W790 x H216 x D287mm 15.9 kg
Pioneer perforated headshell Carbon fiber molding The shell is lightweight, has just the right length on the finger, and is easy to use. The exterior is dull and has a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: dead weight 8.7g
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Pair tube smoke made in Canada JAN measured value 86/76 (rejected value 46) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, 6CA7 compatible ball, made in Russia, measured value 44/44 (rejected value 30) with original box ※The pair is determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Jumper cable, 0.2m, set of 4, silver conductor (PSS), banana-Y lug terminal specification, there is dullness around the plug (Kojima Yosuke)
Accessories: none
Oxygen-free copper (OFC) is used as the untreated conductor at the 6.0 m end of the speaker cable, and the 4-core structure reduces radiation noise. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
RCA cable uses 1.5 m pair of out-of-print conductors and single crystalline high-purity oxygen-free copper PCOCCC with theoretically zero crystal boundaries for all core wires, braided wires, and plug pins. The shield is rolled up on the plug attachment part, it is dull, and there is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.3 continuity confirmed
Maintained! A D/A converter that was said to be close to analog sound. The high frequencies are tightened, the mid and low frequencies are mild, and the sound feels powerful with a sense of directness. The high cost performance also shines (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (21 replaced due to electrolyte condenser fluid leakage, electrolyte cleaning, pattern and solder correction, insulation washer replacement due to damage, sound and HDCD recognition checks on each input/output)
Accessories: manual, power cable
Main specifications: Input terminal/1 coaxial system, 1 optical system, ST link 1 analog output system (RCA) HDCD compatible D/A conversion chip using a multi-bit Barbrown PCM63P-K type W430 x H60 x D230 mm 4 kg
Unspecified power cable 2.0m. The plug is Panasonic WF5018K, and the connector is made by Global Electronics. This cable is relatively easy to handle. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
※Shipping service. Separate volume stereo sound/all of JBL/from table of contents= private JBL theory (Yamanaka Keizo) /listening to the appeal of representative speaker systems (Asanuma Yofumihiro, Sugano Okihiko, Yamanaka Keizo) /JBL Engineer Retsuden and others/published on 1993.4.30. Since the photograph is a sample, the actual product may be broken or there may be markings etc.
The dust cover is out of stock, so it's cheap. The mk4 model is a classic Technics analog player. It is a 78-rotation compatible and cable detachable model, which is rare in the 1200 series, and has strong consumer elements. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: copy of instruction manual
Main specifications: Direct drive, quartz control, rotation speed 33, 45, 78 rpm, tone arm, universal S-shaped static balance gimbal suspension system, needle pressure adjustment range 0 g to 4.0 g, W453 x H162 x D360 mm, 12.5 kg
Maintained. It is a model equipped with the SME 3009R on the LINN LP12. Compatible with everything from lightweight types to heavyweight cartridges such as SPU. Please enjoy the good balance of the large number of sounds unique to analog, the separation of tones, and the profound thickness. There are scratches and dullness on the exterior (Tamura Eiji)
Maintenance information: 2024.5.8 Maintained (power circuit electrolytic capacitor replacement. Arm operation and voice check. (*33 rotations only)
Accessories: No accessories
Main specifications: 3009r/static balance type short type needle pressure 0 to 5g compatible cartridge weight 9.5 to 22 g LP12/W445 x H140 x D356 mm 10.5 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Maintained! A high-performance preamp developed by Onkyo in the early 1980s. It is equipped with 3 types of cartridge selectors for 2 Phono inputs, making it a great specification for analog users. The way the dry mids sound is reminiscent of the sounds of the 60s and 70s. There are conspicuous line marks on the top plate and dents on the corners (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/indicator lamp replacement, mode, recoup, input selector, cartridge selector, subsonic switch disassembly, polishing grease application, operational amplifier replacement, solder repair, each volume, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: input LINE3 system PHONO2 (MM/MC) system power consumption 26W dimensions W450 x H990 x D403 mm weight 9.5 kg
Maintained including the creation of a new dust cover! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
Full maintenance, such as internal and external maintenance, was carried out, and the finish was beautiful! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. Serial 55553L, 55553R (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (exterior repair/repaint) 2017.4.25 Maintained (exterior polishing/all coated woofer cone paper/unit frame paint chip putty repair grill dent correction/paint tweeter distortion and maintenance (edge deformation repair, magnetic circuit slit maintenance complete) unit detachment terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement*Some capacitors before replacement Since it is difficult to remove, remove the wiring to check the remaining input/output waveform and balance, sound output check, frequency characteristic measurement check (~ 42 kHz)
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
YAMAHA's heavyweight premain amplifier. The low frequency with good damping by a good power transformer and the clear sound typical of YAMAHA are attractive. The PHONO input is equipped with MC, making it a great specification for analog fans. The pre-main part can be separated, and there is potential for development into a separate part. There are a lot of front panel stains on the exterior. There is deterioration on the back side of the wood panel (Sasaki Shota)
Maintenance information: 2024.5.11 Maintained (right amplifier power circuit fault repair. Soldering correction in each circuit, including the left and right main amplifiers. Disassemble the switch and polish the contacts and apply contact cleaner. Bad output relay contact replacement. Knob installation correction. (I/O pin jack polish)
Accessories: copy of the manual
Main specifications: 130W+130W (8Ω) 150W+150W (6Ω) PHONO (MM/MC) pre-main separable W473 x H169 x D464 mm 26 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 AccuPhase CD player with sales price 148,000 yen. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, copy of manual
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 Operation confirmed
Accessories: connecting cable, adapter, dust cover
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maintained by the manufacturer! The 3rd generation model of the S10 series. Equipped with AL24 Processing, an analog waveform reproduction technology. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Yamato Yuki)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations, but if it breaks down in the future, pickups cannot be obtained. Loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
Direct drive analog turntable Equipped with a knife-edge tone arm in collaboration with SAEC. A Sumiko Oyster cartridge is also included, and it also has a built-in phono equalizer, so you can enjoy records right away. The exterior is good with no noticeable scratches. Serial 2280200 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual, AC adapter, connection cord, cartridge, head shell, original box
Main specifications: direct drive aluminum die-cast static balance type S-shaped tone arm length 223 mm needle pressure variable range 0 g to 5.0 g applicable cartridge mass 3.0 g to 12.0 g, 14 g to 23 g (including attached headshell) cartridge part: mm type output voltage 4.0 mV needle pressure 1.5 to 2.5 g mass 5.3 g analog output terminal: RCA pin jack (phono/line switching type) W420 x H117 x D356 mm Weight approx. 6.1 kg
Comes with side wood. A masterpiece model of a CD player that reproduces the soft, powerful sound of analog. The thick mid-range and rich analog-like sound quality is a unique appeal. It is a high degree of perfection that can be said to be one of the goals in terms of sound quality among CD players of all time. The exterior is fine with no noticeable scratches over time, and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2017.2.17 Maintained (spindle motor lubrication, height adjustment, all capacitors replaced. Replace the memory backup battery with a super capacity. Tact switch contact cleaning for operation. (Inspection of each operation)
Accessories: instruction manual, power cord
Main specifications: CDM3 mechanism, multi-bit PHILIPS TDA1541D/A converter, 3 analog output systems (XLR x 1, RCA x 2 (fixed/variable)), 1 digital output (AES), 1 clock input/output system (BNC), W320 x H131 x D355 mm, 6 kg
The price has been drastically reduced! 2024/5/15 sales price 128,000 yen LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The price has been drastically reduced! 2024/5/15 sales price 128,000 yen LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1220444 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
M/MC compatible A tubular phono equalizer developed with the aim of better analog reproduction. You can enjoy a warm, natural sound using a vacuum tube non-feedback amplifier and a CR-type equalizer. The impedance can be switched according to the cartridge. Externally, there are line scratches on the top plate. Serial 00180 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cable
Main specifications: MM/MC compatible 12AX7 (ECC83) x 2 W300 x H100 x D260 mm 4.8 kg
The price has been drastically reduced! 2024/5/15 sales price 148,000 yen The X-DP7, which specializes in DACs, has arrived. By inheriting the performance of the X-DP10 and specializing in DACs, a high signal-to-noise ratio has been achieved. It is also DSD compatible, and it is a high quality car with excellent cost performance. There are no noticeable scratches on the exterior. Serial R10939 (Tamura Eiji)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: digital input: USB x 1, OPTICAL x 2, COAXIAL x 2, AES/EBU x 1, CLOCK x 1 analog input: RCA x 2, XLR x 2 analog output: RCA x 1, XLR x 1 PCM: 24, 32 bit/44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768 kHz DSD: 2.8224, 5.6448, 11.2896 MHz (DoP, (Compatible with ASIO 2.2) W420 x H68 x D320 mm weight 5.9 kg