*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. Efficiency can be switched between 5 levels with the rotary switch, and natural harmonics are produced (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: original box instruction manual
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
Maintained! Yamaha's masterpiece preamp. It has a particularly good reputation for phonos, and it is still a popular model among analog users. With a natural and highly transparent Yamaha sound, you can fully enjoy the appeal of acoustic instruments, such as the touch and feel of a piano, and the sharpness of guitar strings. The exterior has small scratches, dullness, etc. (Tomoho Asaine)
Maintenance information: 2024.9.20 maintained (VR disassembly and cleaning of MODE, INPUT, TAPE rotary switch disassembly and cleaning VOLUME, BASS, and TREBLE (partial correction) SUBSONIC, MUTING switch disassembly cleaning, 16 electrolytic capacitors, preventive replacement, solder crack correction for PHONO input RCA terminal board, terminal cleaning frequency characteristics, distortion ratio confirmation)
Accessories: copy of instruction manual
Main specifications: PHONO x 3 system (MM/ MC) MC head amplifier built-in W435 x H72 x D320 mm 7.9 kg
A tubular power amplifier kit sold to commemorate the launch of Stereo Sound's “Tubular Kingdom.” It has been developed and designed based on the concept of “letting as many people as possible enjoy the advantages of vacuum tube amplifiers,” and it achieves both high performance, high stability, and high reliability. The input is provided with independent left and right volumes so that it can be used even when directly connected to a CD player. Serial 257 (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: none
Main specifications: 5881WXT/6L6WGC push pull/ultra linear connection vacuum tube 6L6WGC x 4, 12AU7 x 3 rated output 25W+25W (6Ω) output impedance 6Ω (suitable for 4Ω to 8Ω) W388 x H187 x D330 mm 19 kg
Pure Class A operation phono equalizer that uses a CR-type equalizer that prioritizes sound quality. The circuit is compatible with both MC and MM cartridges, making it easy to use. The exterior is dull. Serial TEP60253 (Tomonori Asaine)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: power cable
Key Specifications: 15-position MC input impedance setting W232 ✕ H50 ✕ D174 mm Weight 3 kg
※ Although it comes with the original box, it is cheap because the O-ring has deteriorated. By dumping the center of the record board, warping and fine vibrations are suppressed. The main body and 8 sub-weights have a structure where they are held down by rubber that acts as a damper, preventing intrinsic resonance (Asaine Tomo)
Accessories: original box
Main specifications: brass/chrome finish, external dimensions 68 x 128 mm, 550 g
Maintained including panel fog removal in 2024 July! Modern vacuum tube premain amplifier. Vacuum tubes are used at all stages. The soft, glossy voice is attractive. While firmly adhering to the thickness and softness of traditional sound images, it is also well compatible with modern sound sources. Serial XB1285 (Mizushima Itsuro)
Maintenance information: 2024.7.22 maintained (glass panel internal fog removal, tact SW replacement, input/output waveform confirmation, sound output test)
Accessories: remote control (replacement), copy of instruction manual, power cable
Main specifications: 75W+75W (2/4/8Ω) input RCA x 6 systems (internal phono MM/AUX switching x 1 system) XLR x 1 system power input RCA x 1 system W445 x H255 x D475 mm 35.8 kg
Scepter 1001 speaker stand We use Onkyo's unique laminated reinforced wood, which has sufficient density and strength as is, impregnated with resin and compressed to about 1/2 the thickness with a heat-molding press. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: W398 x H207 x D370 mm 8.0 kg per bottle
RCA cable 0.75m switchcraft is an interconnect cable with unknown details where you can see a wrapped wire like a western wire inside the plug shield. An attractive soft sound with soft vocals that don't feel irritating unlike what it looks like. The shield is rolled up at the plug connection (Murakoshi Yoichi)
Maintenance information: 2024.9.9 sound output confirmed
Accessories: none
Set of 2 Taock audio board It has a 5-layer structure with cast iron sandwiched between MDF and oak veneer attached to the surface material. It can be expected to prevent floor noise and improve sound quality. Dullness and bruises are scattered (Mizushima Itsuro)
Accessories: none
Main specifications: MDF main material W500 x D450 x H55 mm 9 kg
Maintained! Mark Levinson's masterpiece preamp representing the new generation. It is a sound with a high degree of perfection, good texture, and a sense of freshness. There is no lack of power seen in domestic machines, etc., and you can relax and immerse yourself in music with sound quality with intonation typical of high-end aircraft. There are some scratches on the exterior. Serial 001780 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Maintained (2 urethane springs, 2 ball bearings, 44 capacitors replaced due to deterioration. Fixed due to solder deterioration in the power supply circuit section. Fix the installation of the XLR terminal)
Accessories: remote control, instruction manual, power cord
Main specifications: Line 7 system high precision discrete attenuator W451 × H74 × D357 mm 9.1 kg
An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound attractively. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. The internet has changed, and the emblem is out of stock. The exterior is serial 6353 and 635 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: Saran net (non-genuine)
Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
※It is inexpensive because there are many scratches. An eye-catching TANNOY coaxial 2-way speaker with a beautiful enclosure. The sound quality is also of high quality typical of a modern aircraft, which combines a sense of localization, volume, and subtlety. The high range is wider than before, and transparency has also been improved. There are many scuffs and bumps scattered around the enclosure. Also, the saran net is torn. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: saran net, jumper plate
Main specifications: bass reflex type efficiency 88dB impedance 8Ω crossover frequency 1.5kHz body dimensions W271 x H470 x D260 mm mass 10 kg
Maintained! A famous and famous first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. There are line scratches and scuff marks on the exterior. Serial J3Y212 (Tamura Eiji)
Maintenance information: 2024.9.20 Maintained (the DISC1 signal line has an input volume, impedance changeover switch, and input selector switch, and input selector switch have different signal paths from DISC2, so the input volume was exchanged. Impedance switching, input selector cleaned again) 2024.7.27 Maintained (since the HIGH FILTER/LOW FILTER switch cannot be removed, the mounting part was remodeled and replaced. The gap is gone, but there is some switching noise when switching (both HIGE and LOW). (Overall switches are re-cleaned and comprehensively adjusted)
2022.12.25 Maintained (28 film capacitors and 60 transistors in each board were replaced. DISC LEVEL CONTROL CLEANING Other switch and volume cleaning.)
Accessories: copy of instruction manual, power cable
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
Speaker cable consists of a 2.5 m pair Y lug on one side and a banana plug on one side. It is a cost performance model for the company's flagship model Genesis Silver Spiral. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Using silver-plated 5N oxygen-free copper for the 1.0m pair of analoctm plug conductors, you can hear detailed, powerful, and colorful sounds. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The perfect balance configuration of 1.8 m pairs of ultra-thick OFC conductors on the XLR cable and the OFC braided shield structure improve audio signal dynamics and achieve overwhelming common mode noise reduction. It realizes high purity signal transmission with low resistance. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
This is the first product composed of 1.0 m of 210 borosilicate glass fibers in an OPT cable. Compared to conventional acrylic fibers, it achieves a much higher bandwidth and an attenuation rate of 1/10, making the sound transparent. (TAMURA Eiji)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: No accessories
Mid-grade model using 1.0 m pair of RCA cables with silver-plated 5N oxygen-free copper. It is a cable that enhances the vibrancy of the music and enhances its vividness. It is suitable for fast-paced music. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Mid-grade model using 1.0 m pair of XLR cables with silver-plated 5N oxygen-free copper. It is a cable that enhances the vibrancy of the music and enhances its vividness. It is suitable for fast-paced music. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
XLR cable 1.5m pair If you are familiar with the Mark Levinson brand and own the same brand as Madrigal's XLR cable, don't miss it! There are stains and threads on the sheath (Tamura Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
RCA cable 1.5m pair CZ is an abbreviation for control impedance. The conductor is silver-plated OFHC filled with a structural damping effect that holds uniform impedance characteristics over the entire length of the cable and a special gel (GEL) that enhances separation between internal core wires. The exterior is dirty, and there are scratches on the sheath and plug. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Power cable 1.8m non-twist Luxman standard power cable. This cable is thick, soft, and has a reputation for its high texture. It is an orthodox sound quality that can be used for a wide range of purposes without any habit. There is dirt on the sheath etc. (Fujisawa Yukishi)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
1.5 m pair of RCA cables, double shielded construction using plenty of high-grade copper. It has natural sound quality, high resolution, and deep, deep bass. Oxidation can be seen on the plug (Tamura Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Single sale rectifier tube American square getter code: 8707 measured value 44 (rejected value 40) There are few getters with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Pair tube VT-115A compatible ball smoke double square getter measurement value 40/40 (rejected value 25) with original box (box lid is missing) *Pairs are determined based on Gm values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The 0.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 0.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are manufactured by Neutrik. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are manufactured by Neutrik. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0 m pair terminals of the RCA cable are made by Rean. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Maintained by the manufacturer! A frame using high specific gravity resin is used for the strong ferrite low distortion magnetic circuit. The fresh sound of vocals is impressive. There are some paint bald spots (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Manufacturer maintained (one side, vibration system replaced)
Accessories: instruction manual
Main specifications: Playback frequency 900 Hz to 50 kHz 8 ohm 90 dB/W baffle opening diameter 93 mm screw pitch 115 mm W130 x D 90 mm 2.6 kg
※6 month warranty. Although it is a small speaker, you can enjoy solid sound with a 3-way system. The mid-high range is delicate, and it is a good speaker for those who want to enjoy music for a long time. It's relaxing in terms of sound quality, so if you want to relax with music, please give it a try. It is recommended not only for audio, but also for those with a background music sense or surround orientation. There are some chips and small scratches on the exterior. Serial 70100033 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers 85dB 6Ω 45Hz to 40kHz W180 x H330 x D275 mm Weight 5.7 kg
The interior and exterior have been refreshed! A speaker system incorporating late monitor red into the NEW RECTENGULAR YORK enclosure. The terminal part has been replaced with a banana plug and arranged for practical use. The sound of the box comes out well with a well-balanced sound from low to high frequencies. I definitely want this speaker to play in combination with a tube amplifier (Kojima Yosuke)
Maintenance information: 2024.9.20 Maintained (exterior repair/polishing/clear finish saran net cleaning/repasting, fraying repair. Unit maintenance: Magnetic circuit gap cleaning/center adjustment for both low and high frequencies, peeling and bonding of the center cap. Network maintenance: frequency characteristics check, 4-pin terminal cleaning)
Accessories: none
Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor RED 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 16 ohms size W597 x H1,070 x D375 mm
Famous machines from yesteryear have been revived due to the creation of a new Saran Net and internal and external refreshment maintenance! Middle monitor walnut specification. The punchy bass and sharp, smooth mid-range are all very attractive models. Paper Dome tweeters paint a realistic texture in jazz (Wang Exhibition)
Maintenance information: 2024.9.20 Maintained (new saran net created, woofer cone paper coating. Mid-center cap dent repair, one-sided cone paper tear repair Network frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement. (Detachable unit)
Accessories: none
Main specifications: 3 way 3 speaker front bass reflex type sound pressure level 91 dB impedance 8 ohm crossover frequency 1.5 kHz/6 kHz playback frequency band 45 to 15,000 Hz W362 x H597 x D298 mm 20 kg/book
Single sale rectifier tube American square getter code: 8707 measured value 44 (rejected value 40) There are slightly fewer getters with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
*Currently sold. Yamaha wide FM compatible tuner. The aluminum front panel gives it a sense of luxury. You can listen to AM broadcast programs with the same sound quality as FM. It's convenient because it randomly stores up to 40 favorite FM stations and AM stations. There are line marks and minor scratches in places (Kojima Yosuke)
Accessories: instruction manual, AM antenna
Main specifications: FM tuner section reception frequency 76.0 to 94.9 MHz (FM complementary broadcasting compatible) AM tuner section reception frequency 531 to 1611 kHz dimensions W435 x H87 x D306 mm weight 3.2 kg
The price has been reduced! 2024/9/18 sales price 238,000 yen ※There is a crack in the plastic part of the speaker terminal, and the cabinet is scratched, so it's cheap. A vacuum tube amplifier bearing the company's standard number “38,” with a sense of range, resolution, and speed that can be used today. The phono circuit is also compatible with MC (High/Low), and although it is only volume, it is possible to operate a remote control, and you can enjoy the slightly fresh sound of the vacuum tube that responds to convenience. Downsized from the original “38” series, it is a nice improvement in appearance that is small with a width of 400 mm and fits well. There are dents on the cabinet on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.9.18 Operation confirmed
Accessories: remote control, power cable, copy of instruction manual
Main specifications: rated output 30W+30W (6Ω) 25W+25W (8Ω, 4Ω) input phono (MM/MC high/MC low compatible) vacuum tubes EL34 x 4, ECC83 x 4, ECC82 x 3 W400 x H196 x D310 mm weight 20 kg
The manufacturer has completed maintenance, and a new dust cover has been created! A player system that inherits the technology of the company's advanced phono motor DP-80 and has been brushed up in terms of both design and operability. A 70mm thick heavyweight cabinet with a high anti-vibration effect that also has a comfortable feel, works stably with the company's proud “double structure turntable” and quartz lock, and is easy to use with excellent operability. There are small scratches on the exterior, but it is a good category even when viewed from the year it was released (Oikawa Tetsuji)
Maintenance information: 2024.9.19 manufacturer maintained (2 transistors replaced, 10 power capacitors replaced, arm removal cleaning, sound output test)
Accessories: copy of instruction manual
Main specifications: static balance type manual player quartz lock direct W487 x H160 x D443 mm approx. 16 kg
Maintained! A control amplifier representing Mackin's golden age. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. There is a feeling of use on the exterior, such as small scratches and dullness over time. Serial JBZ5270 (Yamato Yuki)
Maintenance information: 2024.9.19 maintained (each SW, VOL cloning lamp deterioration replacement, pin jack cleaning, glass panel peeling correction, bridge diode replacement, auto onboard part, capacitor replacement, connector part, direct solder pattern, resolder, push button dismantling, cleaning operation check)
Accessories: copy of instruction manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg