Maintained! This time, not only does it have 1 S-shaped one, but it also comes with 2 straight pipes! EXCLUSIVE's super popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. There are small scratches, but it is a good category even when viewed from the model year (Oikawa Tetsuji)
Maintenance Information: 2024.6.9 Maintained (Replaced due to semi-fixed volume disconnection. The transistor was replaced due to rotational instability. The electrolytic capacitor has been replaced. The arm bearing was cleaned, operated, and audio-checked. Each rotation lock has been adjusted and the voltage has been adjusted. (Silicone grease attached)
Accessories: transport screws, subweights, 2 straight pipes, silicone oil
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
A high-performance integrated SACD/CD player that is the successor to the DP-550. It is a stable sound that makes you feel the thickness of the mid to low frequencies, and the spread of sound from low to high frequencies is not excessive or insufficient. The USB terminal is compatible with 384 kHz 32 bit and 11.2896 MHz 1 bit DSD. The tray button printing is missing. There is a small scratch on the side (Sasaki Shota)
Maintenance information: 2024.6.9 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 4MDSD+ sampling frequency HS-LINK 32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), coaxial32kHz-192kHz, optical32kHz-96kHz (PCM), USB32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), 11.2896 MHz (DSD/ASIO only) output Level control 0 dB to -80 dB frequency characteristics 0.5-50,000 Hz dynamic range 116 dB dimensions W465 x H151 x D393 mm weight 18.8 kg
Maintained! Comes with original box. Levinson's long-selling prime amplifier. A dual monaural configuration that is thoroughly packed into one chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. You can see a feeling of use such as exterior, dullness, abrasions, scratches, etc. (Sasaki Shota.)
Maintenance information: 2024.3.3 Maintained (replace deteriorated parts. DC voltage/DC offset voltage/idling current/other inspection adjustments)
Accessories: original box, remote control, manual, power cable (non-genuine)
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
Speaker cable, 2.9 m pair, company Y lag/banana plug specification, 8-core structure, LGC copper conductor, 4 types of different diameter wires, has a sense of energy close to advanced models, and has excellent cost performance. Colored tape is wrapped around some sheaths (Kojima Yosuke)
Accessories: none
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 10g
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 90/90 (rejection value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 86/84 (rejected value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
From exterior painting to driver gap cleaning, it has been refreshed and maintained with attention to detail! The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. The emblem is missing. It has a beautiful finish due to exterior maintenance (Tomoho Asaine)
Maintenance information: 2024.2.29 maintenance (exterior repair/gray paint, front and rear baffle repair/painting, horn painting, new saran net creation. Woofer maintenance (edge replacement, cone paper coating, center cap replacement) mid maintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning/screw replacement) tweeter maintenance (magnetic circuit gap cleaning, terminal contact cleaning/screw replacement) network maintenance (frequency characteristic check, terminal cleaning/screw replacement) (Cleaning, ATT disassembly and cleaning, internal cable extension processing).
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Current product! First arrival at Style 35 Hi-Fi Hall with a beautiful piano black finish! The newly developed ribbon tweeter and woofer achieve high fidelity and strength with traditional diaphragms. As for the exterior condition, there are slight scratches on the side (Yamato Yuki)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box saran net
Main specifications: 2-way rear bass reflex type 85dB 4Ω W179 x H304 x D284 mm 6.8 kg
Speaker cable, 4.5 m pair, Y lug specification, varistrand structure, high purity copper, 8+8 braid structure, Teflon coating. It is a standard model of Kimber Cable that is clear, has a high SN, and has a wide sound field (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, uses high-purity silver wire with VariStrand structure. KIMBER KABLE's unique “3-core blade structure” is recommended for those who want to improve sound loss anyway. The strengths and weaknesses are clear, and the presence of each instrument, especially the strings of piano, stringed instruments, etc., stretches very nicely. The spread of the mid to low range is also excellent. There is a sense of dynamism that is hard to imagine from the delicate design. There are abrasions on the tubes and plug shells (Kojima Yosuke)
Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
Line noise filters. An accessory that thoroughly eliminates transient distortion generated within line cables and improves overall signal-to-noise ratio. Sounds that could not be heard until now appear clearly, and it becomes a dynamic playback sound that stretches and stretches from low to high frequencies (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: none
Main specifications: Input side: RCA jack Output side: RCA pin plug
1 pair of unspecified speaker terminals. The construction is solid. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
*Currently sold. DENON's small compact speaker. There are no standing corners, and the mellow sound allows you to relax and enjoy the music without getting tired. There are stains and broken dowels on the exterior and saran net, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex, anti-magnetic design, 38Hz to 45kHz, 6Ω, 89dB, W202 x H344 x D255 mm, 6.2 kg
*Currently sold. ONKYO 2-way speaker The sound quality is sharp, has a clear impression, and has a sense of stability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex bookshelf type woofer, 12 cm, cone type tweeter, approx. 2 cm, dome type impedance, 6 ohms, maximum input, 80 W, W193 x H340 x D270 mm, 5.2 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see the exterior, mold, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. Lo-D's 3-way 3-speaker system. I have a good impression that the sound connection from the low range is good. As a domestic speaker of this era, it makes me listen to jazz in a sexy way. In addition to the exterior and paint peeling, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers sealed impedance 6 ohms output sound pressure level 92 dB W315 × H575 × D305 mm 13 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer system with a built-in amplifier that uses a dual drive system with a 16 cm woofer unit mounted on both the left and right sides. It is equipped with a switch between Music and Movie, and you can select the playback mode according to the Hi-Fi/Theater genre. You can see a feeling of use on the exterior, holes in the saran net, and dullness, abrasions, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: none
Main specifications: 1 way 2 speakers with built-in amplifier, sealed system, anti-magnetic type, 16 cm cone type x 2, playback frequency range 30 Hz to 200 Hz, high cut filter, variable in the 50 Hz to 200 Hz range, W285xH381xD347mm, 11.5 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. On the exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen, such as dullness and scuffs on the entire surface (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. Exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
Comes with an indicator If you're an audiophile, this is a British “static electricity removal pistol” that you definitely want to have. With a mechanism that neutralizes static electricity with positive and negative ions, incidental sounds disappear, and the sound quality of analog records and CDs is improved to a clean sound with good visibility. Can be used approximately 50,000 times without using batteries (Asaine Tomo)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box, indicator
Key Specifications: Static Electricity Removal Accessory for LP/EP
※It has a cigarette smell, so it's cheap. The current premain amplifier was born as a model commemorating Denon's 110th anniversary. It is a model that uses high quality parts from the SX1 LIMTED and specializes in sound quality and functionality. It is also equipped with a digital input, and the USB-DAC is DSD compatible. It's delicate, has a sense of dynamism, and plays a higher level of sound. There are no noticeable scratches on the exterior. Serial J092000089 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 80W+80W (8Ω) speakers: load 4 to 16 ohms frequency characteristics 5 Hz to 100 kHz input: line input x 3, PHONO (MM/MC) x 1, EXT. PRE x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 3 W434 x H182 x D450 mm weight 25 kg
*Since the video has not been checked, it is currently being sold. Multi-function AV amplifier equipped with high sound quality surround circuit D.D.S.C. Digital, uses high sound quality technology AL24 Processing Plus for all channels, and is equipped with a high image quality 1080p compatible digital video interface HDMI. The exterior is dull and there are line marks on the front panel. Serial 7041502162 (Tomonori Asaine)
Maintenance information: 2024.6.8 Operation confirmed ※The video has not been checked.
Accessories: remote control power cable
Main specifications: Equipped with a 192 kHz/24 bit compatible digital interface receiver, A/D converter, and D/A converter; Rated output: 8 ohms; 120 W x 7; size: W434 x H171 x D429 mm; weight: 18 kg
Audio-only charging eraser. This is the 3rd generation developed through repeated improvements. The charge is reduced to zero by discharging even the slightest amount of static electricity to the human body more quickly. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original instruction manual box
Main specifications: W345 x D340 x H25 mm
A speaker system that makes it possible to reproduce sound with excellent transparency and total balance by adopting the same unit with the know-how of the advanced Ascent. The three-dimensional space radiated from AVALON's unique enclosure and the surprisingly clear sound image with high resolution are still alive and well here. Sound quality that doesn't make you aware of the presence of speakers has created a unique world. There is a feeling of use on the exterior due to small scratches, sunburn, dullness, etc. (Asaine Tomoho)
Maintenance information: 2024.6.9 sound output confirmed (good sweep test)
Accessories: instruction manual saran net jumper cable (general purpose product)
Main specifications: 2-way, 2 speakers, sealed system, floor type, unit used: bass/22cm cone type, treble/2.5cm titanium dome type Playback frequency band: 35 Hz to 24000 Hz ± 1.5 dB crossover frequency: unannounced impedance: 6 ohms output sound pressure level: 86 dB (2.83 V, 1 m) W279 x H991 x D381 mm 43 kg
The price has been reduced. 2024/6/8 sales price 498,000 yen This is AYRE's ambitious work that takes advantage of the characteristics of FETs and uses a perfectly balanced circuit configuration from input to output. A non-feedback type complementary circuit that combines the input stage of a cascade connection with the output stage of the source follower is used. You can listen to a sound with a natural feel that makes you feel the expanse of space. The exterior has scratches and dirt on the front, and there is a feeling of use such as scratches overall (Mizusaki Ryo)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) 100V specification W460 × H180 × D460 mm 43 kg
Special equalizer for photoelectric cartridges. Since there is no resistance to the movement of the vibration system, more delicate playback sound can be expected than conventional cartridges. Since it is a special circuit that supplies power to LEDs, it can only be used with a dedicated equalizer. Cut off the front corner. There is a scratch on the lower part of the rear (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W325 x H96 x D21 mm 5.5 kg
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 84/84 (rejected value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair Tube 45Special Compatible Ball Direct Heat Triode Tube Fishing Rod Type Filament Engraved Made in America Measured Value 110/110 (Rejected Value 55) It seems to be an unused item due to the state of the tube with the original box! *Pairs are determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Maintenance information: 2024.6.8 confirmed
Accessories: none
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
Pair Tube 45Special Compatible Ball Direct Heat Triode Tube Fishing Rod Type Filament Engraved Made in America Measured Value 110/106 (Rejected Value 55) It seems to be an unused item due to the state of the tube with the original box! *Pairs are determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: original box
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. It is a beautiful item with little feeling of use (Mizusaki Ryo)
Maintenance information: 2024.6.8 sound output confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
Maintained! ※It has been changed to an RCA terminal. Marantz's masterpiece CD player equipped with the Philips swing-arm mechanical CDM-1. The sound is rich, analog-like. It has the same feeling of use as time has passed (Daiki Goto)
Maintenance information: 2024.6.8 maintained (slide motor belt NG → replaced. There is poor thru-hole soldering in the decoder board → all re-soldered. Bypass C NG in other servo boards → replace. ~ CD mechanical turntable motor bearing concave → correction ~ reading check)
Accessories: copy of the manual
Main specifications: Philips swing arm mechanism equipped with CDM-1 14 bit DAC W320 x H90 x D300 mm 7 kg
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
Maintained! 117V specification. A masterpiece model from the golden age of Macintosh. With an output of 50W, the modest yet rich, and flavourful sound is attractive. You can enjoy the rich and realistic sound in combination with a pri of the same age. The exterior is dull and has small scratches. Serial AT2722 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (each indicator lamp replaced. Electrolytic capacitor replacement. Input volume and switch cleaning. Bias and offset checks. Output audio check)
Accessories: copy of instruction manual
Main specifications: 117V specification output 50W+50W load impedance 4, 8, 16 ohm input sensitivity 0.5V full stage direct connection pure complementary output transformer W406 x H138 x D330 mm 22.7 kg
Maintained! A player equipped with a genuine SME/3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
The price has been reduced! 2024/6/8 sales price 1,480,000 yen SARASTRO from Canadian high-end speaker manufacturer VERITY AUDIO is in stock for the first time at Hi-Fi! The color has a piano black finish. The ribbon tweeter, which is also used in the company's higher-level models, reproduces the appeal of this unit up to 50 kHz without stress. The balance between the highly transparent and realistic sound details and the voluminous woofer section is exquisite. Adjust the low frequency by distance from the wall. Please enjoy the sound that is rich in scale. There is a slight scuff on the side and a scratch on the upper rear corner. Serial SM1031, SM1032 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, jumper cable, spikes
Main specifications: 3-way 3-speaker bass reflex type frequency characteristics 20 Hz to 50 kHz efficiency 93 dB impedance 8 ohms W280 x H1200 x D508 mm 135 kg
The price has been reduced! 2024/6/8 sales price 598,000 yen Maintained by Yukim! A special version of Delphi Mark 5, which was planned to commemorate the 15th anniversary of Oracle's founding, debuted at Hi-Fi Hall! A belt drive record player with an SME SERIES V mounted on the arm. In addition to the thickness of the belt drive, SERIES V cuts and high freshness are added, making you feel an overwhelming amount of information. The exterior has marble scratches and dullness. Also, the 33/45 display lamp is displayed as if it were slightly missing, but this is the current state. Serial 10351 (Yonejima Satoshi)
Maintenance information: 2024.6.8 Maintained (parts replacement (various suspension dampers, suspension pillars, suspension caps), suspension adjustments, operation confirmation, LED lamp replacement. (Arm mechanism partial dismantling and cleaning)
Accessories: power supply unit, connection cable
Main specifications: belt drive record player 33/45 arm part: tapered magnesium arm, dynamic balance type, effective length 233.2 mm, needle pressure range 0 to 3 g, overall part: W483 x H165 x D368 mm weight 26.9 kg
A compact and convenient receiver. With a configuration of SACD/CD player+FM/AM radio+PHONO terminal (with MM/MC compatible phono equalizer), you can easily build a compact, and good-sounding system. You can see a feeling of use, such as the exterior, dullness, and noticeable scuffs on the sides (Kobayashi Hitoshi)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control, power cord
Main specifications: rated output 37.5W+37.5W compatible speaker impedance 4Ω to 16Ω frequency characteristics 10Hz to 40kHz W300 x H110 x D341 mm 8 kg
This is a pre-main amplifier that allows you to enjoy everything from analog records to the latest high-resolution sound sources with high sound quality. The sound is clear and highly transparent, and it outputs music with a high sampling rate even more attractively. An independent dedicated board phono equalizer compatible with MM/MC is used. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 4Ω/60W+60W 8Ω/30W+30W practical maximum output 90W+90W frequency characteristics 10Hz-100kHz W435 x H139 x D331 mm 9.2 kg
※The vertical stand is missing, and there are many small scratches, so it is cheap, and it is currently sold. Stand is missing. The company's first standalone USB-DAC and headphone amplifier that is also compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. In addition to the exterior and tape marks, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: AC adapter
Main specifications: DSD signal sampling frequency 2.8224, 5.6448 MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
TEAC digital recorder. You can easily record in high resolution quality to an SD card or CF (compact flash) card. It is equipped with a wide variety of terminals, making it easy to connect to your own devices. I'm also happy that it is DSD compatible, and the quality of the recording is surprising considering the price. There is a slight feeling of use and small scratches on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.6.8 simple recording, playback confirmed
Accessories: instruction manual, power cable
Main specifications: Compatible media SDHC card (4GB to 32GB), SCXC card (64GB to 256GB), CF card (1GB to 128GB), USB memory (2GB to 64GB) recording and playback format: PCM (sampling frequency 44.1k/48k/88.2k/96k/176.4k/192 kHz, data length 16 bits/24 bits), DSD (sampling frequency 2.8224m/5.6448MHz) W442×H56×D305mm 4.4 kg
Maintained! An eye-catching Lax pre-main amplifier with a unique indicator. It is a traditional lackstone, and the soft and warm mid-low range like a vacuum tube is attractive. The speakers, which have a solid sound quality, also play softly. There is a slight gap between the exterior and the BASS dial scale, and a feeling of use can be seen, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.4 maintenance completed (14 deteriorated parts in each circuit replaced, switch and volume contacts corrected, input/output pin jack polished)
Accessories: none
Main specifications: 40W+40W (8Ω) W443 × H153 × D273 mm 9.3 kg
Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2024.6.7 sound output confirmed
2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, slip stud installation, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/application of dumping agent, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removes aluminum seals that do not require unit detachment Treatment to prevent idling, re-fix the unfixed coils inside the treatment with silicon ATT contact cleaning. An exchange frequency characteristic measurement check (~ 42 kHz) is performed because the wiring is broken at the base of the resistor, and the original capacitor is continuously used to confirm the input/output waveform and balance for good results, check the sound output)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. Stains are conspicuous on the exterior and front panel, and a feeling of use can be seen throughout, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.31 Operation confirmed
Accessories: remote control
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Manufacturer maintained, including traverse mechanism replacement! A long-selling model equipped with a USB-A terminal. Compared to other models in the same class, it is popular for its slightly thicker sound that is pleasant to listen to. Music files can be played directly by connecting to an iPod/iPhone, WMA, MP3, or USB memory with recorded files. There is slight dullness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.5 manufacturer maintenance (loading motor, loading belt, traverse mechanism replacement. (Inspection of each part, operation, sound test)
Accessories: remote control
Main specifications: audio output terminal/RCA x 1, headphone x 1, digital output/light x 1 W434 x H107 x D273 mm 4.1 kg
A popular model of electric voice equipped with a 46cm woofer. There are 4 bass reflex ports around the woofer, but that wasn't enough, and the midbass also has 1, creating a low frequency with good clarity. Coupled with a mild mid-range and thick high frequencies, it is a speaker that has the flexibility and richness of European sound while having a dynamic structure. Serial S111556 S112448 (Murakoshi Yoichi)
Maintenance information: 2022.6.23 maintained (exterior cleaning, scratching, dent repair, stain area touch up saran net simple cleaning)
2018.7.6 Maintained (Exterior Cleaning Touch Repair Saran Net Replacement Woofer, Mid and Edge Replacement Driver Magnetic Circuit Slit Cleaning Center Adjustment Diaphragm Cleaning Contact Cleaning Network Input Terminal Rust Removal Cleaning Reinforcement Screw Fastener Application BI-AMP Switching Plug Cleaning ATT (SW Type) Cleaning Input/Output Waveform and Balance Check, Sound Output Check frequency characteristics measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex floor type woofer 46cm cone type scoker 30cm cone tweeter horn type crossover frequency frequency 250 Hz, 1.5 kHz playback frequency band 40 to 20000 Hz 6 Ω 95dB W64.2 x H119.3 x D45.0 cm 63.0 kg