The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
Pair tube direct heat triode tube American-made smoke measurement value 68/68 (rejection value 38) with white box (lid claws are missing) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube American-made smoke measurement value 72/70 (rejection value 38) with white box (lid claws are missing) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube made in Russia measured value 72/72 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
1 bottle sold in England Xf1 6CA7 compatible ball tea base double ring getter date code: Xf1 B1I4 measured value 46 (rejected value 30) with white box (written on the box), there is getter burn, and it has decreased slightly (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube made in Russia measured value 72/70 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced! 2024/5/23 sales price 198,000 yen ※This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve replacement. AC cord replacement Main bearing disassembly, bearing thrust replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing/added; nuts, metal washers, and rubber washers added. Running tests OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: No accessories
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
The price has been reduced! 2024/5/23 sales price 39800 yen Chinese SMSL D/A converter. ESS's ES9068AS is used as the DAC. Although inexpensive, it supports a wide range of inputs such as AES/EBU and I2S. The exterior is dull. Serial 4600010200207 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: input USB, optical, coaxial, I2S, 1 AES/EBU system each W210 x H40 x D170 mm 1.2 kg
HDMI cable 1.0 m transmission speed 10.2 Gbps to 21 Gbps (varies depending on cable length) The shorter the cable, the faster the transmission speed. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
The price has been reduced. 2024/5/23 sales price 79,800 yen Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Maintained! Comes with a remote control. This model was created by gathering the know-how of the Integra series. There are only models produced with a thorough emphasis on sound quality, which is a bit different from other Integra series, and has a relaxed, relaxed sound. The exterior has dullness, threads, and small scratches. Also, the SP terminal has been replaced. Serial 6301012428 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (disassemble the push switch and remote wire switch, polish the contacts, and apply contact cleaner. Volume contact correction. Remote control operation check OK)
Accessories: remote control, instruction manual
Main specifications: 155W+155W (6Ω) 120W+120W (8Ω) damping factor 400 (8Ω) frequency characteristics 2Hz to 100kHz W471 ✕ H170 ✕ D430 mm 26.6 kg
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
A backload type enclosure that can mount an unspecified JBL38cm woofer. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
*Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
This is an orthodox cable for 6.0m pair entry for speaker cables. The wire is soft and easy to handle. The exterior is dirty, dull, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
The price has been reduced. 2024/5/20 sales price 30,000 yen A FOSTEX HA21 throat adapter is set on a self-made horn with a size that imitates the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The price has been reduced! 2024/5/19 sales price 498,000 yen Maintenance has been completed, such as capacitor replacement/replacement of deteriorated parts! It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. The exterior has a feeling of use over time, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.19 Maintained (volume curing improvement treatment for TWIN, 2W oil capacitor replaced with 0.01μF, 3W oil capacitor replaced with 0.5 μF, missing thermistor, replacement, 250μF, domestic CE replacement, block capacitor 100/30 μF defective replacement, oil capacitor 0.22 μF defective replacement electrolytic capacitor 20μF, etc. Deterioration replacement resistor 2W deterioration replacement Vacuum tube socket and RCA jack caulking repairs ※ Other operation checks have been performed (measured at 41 to 58 W with rated output AC 100 to 117 V, SP: 8 Ω) ※ The power transformer groans a little, but there is no problem with performance)
Accessories: A copy of the English instruction manual
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
Fully maintained! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. The exterior has dullness, small scratches, and paint peeling. Serial 473753 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 30W/30W) input/output waveform confirmation sound output check performed impedance switching SW gain VOL disassembly contact refinement oxidation and sulfidation prevention grease coating input/output waveform confirmation load test (1 kHz) (Sine wave at 8Ω load: 30W+30W) sound output test)
Accessories: copy of instruction manual
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
*Currently sold. JBL/UREI professional power amplifier Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. There are conspicuous abrasions on the exterior and top plate, and a feeling of use such as dullness and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
*Needle cover missing. Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained. An impressive pre-main with a glossy, elegant sound. The advantage of being equipped with MOS-FET is that visibility is good, and the good balance without feeling a sense of loss in sound is attractive. It is a model that can be enjoyed regardless of genre. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (speaker relay replacement, push SW replacement due to sound interruption when switching MUTING switches, replacement volume with replacement volume for sound output, other INPUT selector electric SW, Cartrich LOADSW, speaker rotation switch, direct INPUT switch, polishing and cleaning grease application for each disassembly contact, DC balance DC bias adjustment, due to large internal dirt (Since it is a VR replacement for cleaning and volume, the volume cannot be changed with the remote control since it is not electric)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) W470 × H165 × D435 mm 21.3 kg
Exclusive stand for the DS-77HR sold separately. Of course, it is also recommended for other medium speakers. The exterior has creases, floats, scratches, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W410 x H264 x D330 mm weight 10 kg
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
※ Because it is cheap, it is currently sold. JBL 2-way speaker. It is a large, well-balanced model that is easy to use. It is also recommended as a speaker for BGM in stores, etc. On the exterior, there are stains and adhesive marks on the edges. Also, there are some holes on the sides. Serial 121213353121213 (Yonejima Satoshi)
Maintenance information: 2024.5.19 sweep test good
Accessories: grill net
Main specifications: W152 × H232 × D140 mm 2.5 kg
※Since it is cheap, it will be handed over as is. A mixer with an effect loop that can mix 3 channel inputs (microphone or line) and 3 stereo line systems. The exterior has dullness and scratches. Serial M1007000864 (Tamura Eiji)
Maintenance information: 2024.5.19 simple check OK (details will not be checked)
Accessories: No accessories
Main specifications: W483 x H44.5 x D152 mm weight 2.8 kg
A record player equipped with a Bluetooth (R) function and a USB output terminal. It can be connected to a Bluetooth (R) compatible wireless speaker, etc., and is recommended for those who want to enjoy a record player casually. As for the exterior, there is a thread on the dust cover. Serial 1007740 (Tamura Eiji)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: AC adapter, EP adapter
Main specifications: W516 × H198 × D433m mass 5 kg
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Speaker cable is a current CARDAS entry series speaker cable with an unprocessed 4-core structure with 1.5 m pair terminals. Use Perfect Surface Copper. The high frequency extension of the single line and the Ritz line is an appeal that cannot be obtained anywhere else. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: No accessories
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg
The price has been reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement. Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Maintained by the manufacturer! The second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 7061502031 (Yamato Yuki)
Maintenance information: 2024.5.17 Maintained (tray washing loading belt, tray opening/closing SW replacement)
Accessories: instruction manual remote control
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 128,000 yen ※Depending on the arm base, the mounting position of the arm is slightly close to the shaft side. Since the arm is long, please remove the dust cover for playback. Comes with SAEC arm stabilizer AS-500! A record player that is highly regarded for its smooth rotation and the effectiveness of the insulator's suspension. The WE-308 arm features a double knife edge for sharp sound and accurate sound image localization. It is a combination of LUX's smooth and quiet motor and SAEC arms that cut sharply into the sound source, so you can fully enjoy the fun and depth of analog. Additional rubber feet have been attached to the legs to prevent the AS-500E. The exterior is dull and has small scratches. Serial G8903281 (Murakoshi Yoichi)
Maintenance Information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. (Inside Force cancellation weight exchange)
Accessories: phono cable
Main specifications: PD-131 direct drive system 8 pole 24 slot brushless DC servo motor W472 x H160 x D372 mm weight 12 kg WE-308 double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g cartridge weight range: 5.5 to 12.5 g