Oyaide record stabilizer. The vibration mode is optimized with a hybrid configuration of aluminum, brass, and texalum. Unnecessary vibrations associated with platter rotation are attenuated, and sound groove tracing is dramatically improved. It can also be used as an EP stabilizer by reversing it up and down (Daiki Goto)
Accessories: original box, instruction manual
Main specifications: 200g (no weight) to 440g (full weight attached) *Weight can be changed in 40g increments, diameter 70mm, H35mm
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior and scratches on the back (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
※It is inexpensive because it has cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. There is dirt and dust on the exterior (Tamura Eiji)
Accessories: none
LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. The exterior has been changed to dullness and rubber feet. Serial 20220398 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. There is a slight linear stain on the surface (Murakoshi Yoichi)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
Garrard 301 turntable seat. This mat alone changes the sound quality. Try it once! In addition to cracks on the exterior and spindle holes, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Currently sold. ADC 10-band graphic equalizer. There are no problems with the current situation, operation, etc., but the current situation is because it is cheap. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: none
Main specifications: W435 x H88 x D222 mm 4.3 kg
Set of 24 Amazon Basic banana plug It can be connected, making it convenient when adding tweeters, etc. If you've been looking for one, go ahead. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Set of 8 brass insulators The compact size is ideal for small speakers and CD players. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure; load capacity: 5 kg per piece; diameter: 18 x thickness: 11 mm; weight: approx. 18 g per piece
The current state is just the main unit and the dust removal brush. Discwasher record care system The cleaning liquid is out of stock, so it's cheap. The touch and grip when you hold it is reminiscent of a brush from a luxury shoe cleaning kit. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: original box, brush
Main specifications: W121 x H60 x D58 mm (actual measurement)
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
※The top surface is severely damaged, so it is inexpensive. This is a custom-made model that fits the size of Acoustic Revive's popular RSS series 4-legged speaker stand to LAT-2. Of course you can use it with other speakers if the size fits (Ryo Mizusaki)
Accessories: spike holder
Main specifications: W300 x H610 x D400 mm top plate W280 x D360 mm 28.5 kg/1 bottle (actual measurement)
Although the details of the stand are unknown, it is well-made, and it is a silver iron stand.
It has a simple appearance, so it can be used for a variety of purposes. The exterior has noticeable dirt on the bottom plate and support (Mizusaki Ryo)
Accessories: none
Main specifications: height: 625 mm top plate size W145 x D180 mm bottom plate size W250 x D310 mm weight 5 kg/1 bottle
A slow starter that slowly starts the connected device and protects it from inrush current when the power is turned on. PSE standard product The front panel indicator gradually brightens in sync with the gentle power start, and you can visually confirm the soft start. Serial 0919HA7026120709 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 continuity confirmed
Accessories: No accessories
Main specifications: Output/input capacity 1500 VA, output frequency 50/60 Hz, standby power 0.01W or less, W130 x H94 x D267 mm (without protrusions) 1.8 kg
Unspecified wood cabinet. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W470 x H134 x D310 mm 2.2 kg (actual measurement)
This is a special cleaner for 12-inch LP records that can clean records with 200W high-output ultrasonic waves. It can remove micro, stubborn dirt and dust that is invisible to the naked eye and adheres deeply to the sound groove. This effect also has an overwhelming impact on sound quality. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Jogo power cable (general purpose)
Main specifications: built-in tank capacity 2.5 liters (use of commercially available purified water is recommended). Approximately 50 to 100 sheets can be washed with one water supply W435 ✕ H300 x D181 mm weight 14.4 kg
The price has been reduced! 2024/6/2 sales price 79,800 yen Special arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. There is a feeling of use such as scratches on the side of the exterior (Tamai Jun)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
A dust cover of the same size as the C-91 compatible with MICRO's BL-91, BL-99V, and SX-111FV. It is a sturdy construction with a thickness of 4 mm. There is an abrasion on the front (Murakoshi Yoichi)
Accessories: none
Main specifications: W523 x H100 x D410 mm
This wooden speaker stand is ideal for small and medium speakers. The height is 44cm, making it easy to adjust the listening point. A hard urethane cushioning material is attached to the 4 corners of the top plate (Oikawa Tetsuji)
Accessories: none
Main specifications: top plate W340 x D245 mm height 440 mm bottom plate W380 x D 340 mm 5 kg
JVC AV selector. Devices such as 4 systems of players can be connected. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Continuity confirmed
Accessories: none
Main specifications: 4 systems (input 1 to 4 video/audio L/R) output terminal 1 system (video/audio L/R) video frequency band 10 MHz W170 x H40 x D78 mm approx. 187 g
※It is inexpensive because there are many abrasions, stains, etc., and there is a feeling of use. A classic disc stabilizer. Moderate weight gives a sense of stability to record playback (Kobayashi Hitoshi)
Accessories: none
It is a set of a directional velvet brush with high cleaning performance and a cleaning liquid that suppresses static electricity, but there is no liquid left. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Key Specifications: Cleaning Kit Wide Type
This is a wet cleaner for cords. A wide type that can wipe down the surface of an LP record. In addition to the appearance and yellowing, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Accuphase's dedicated analog disc input board. Using the latest circuitry and selected high-quality sound materials, extremely low noise and high-accuracy RIAA deviations have been achieved. The optimal impedance can be selected from 30/100/300 ohms during MC. It is also equipped with a subsonic filter, so you can enjoy an even higher grade analog sound than the AD-30 (Kojima Yosuke)
Accessories: instruction manual, original box
Main specifications: [MM] gain 40dB, input impedance 47kΩ [MC] gain 66dB, input impedance 30/100/300Ω switching [compatible models] C-2000, C-2110, C-2120, C-245, C-265, CX-260, E-211, E-212, E-213, E-250, E-260, E-270, E-306V, E-307, E-308, E-350, E-360, E-370, E-406 ・E-407 ・E-408 ・E-450 ・E-460 ・E-470 ・E-530 ・E-550 ・E-560 ・E-600 ・E-650
Victor's AV selector 4 inputs 1 output The exterior has a feeling of use such as dirt, scratches, and smudges (Kanai Hidetsugu)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: none
Main specifications: W169 x H40 x D78 mm 200 g (actual measurement)
※It is inexpensive because it has a lot of feeling of use. A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior has a feeling of use such as fading due to aging (Kanai Hidetsugu)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. There is a feeling of use, such as line scratches scattered on the top plate (Kanai Hidetsugu)
Accessories: none
Main specifications: main body W400 x H220 x D350 mm 5.8 kg (actual measurement) top plate W360 x D320 mm (actual measurement)
It's a small digital interface that fits in the palm of your hand. The input uses a Type-C USB interface. The output is I2S/optical/coaxial. The sampling rate is PCM32 bit/768 kHz compatible, DSD native, DOP64 compatible (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: original box, connection cable
Main specifications: W80 x H13 x D60 mm dead weight 120 g
High position small speaker stand High density compression boards are used, and rigidity can be expected. The round curved silhouette on the front side is also a point. There are abrasions in places (Kojima Yosuke)
Accessories: none
Main specifications: height 500 mm top plate W240 x D270 (W200 x D250) mm bottom plate W280 x D330 mm weight 6.0 kg/book
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Exclusive stand for the DS-77HR sold separately. Of course, it is also recommended for other medium speakers. The exterior has creases, floats, scratches, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W410 x H264 x D330 mm weight 10 kg
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
Speaker stand for B&W 805D series Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the goal of suppressing speaker stress by absorbing and releasing it without applying a load due to the diamond formation structure (Daiki Goto)
Accessories: spikes, T-PROP
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
HAMILEX speaker stand for small speakers. Recommended for installing small speakers and adjusting the height. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W230 x H150 x D250 mm 2.0 kg total load capacity 20 kg (1 unit)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)