The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
The price has been reduced! 2024/5/13 sales price 84,800 yen ※The rubber on the saran net cloth cover is fully stretched, so it's cheap! LINN tall boy speaker. It is a speaker with a relaxed, mature sound like a circle, and the more you listen to it without decoration, the more delicious it is. There is a feeling of use on the exterior due to scratches, dullness, etc. ※The active module is not included. Serial 004963 004964 (Tomonori Asaine)
Maintenance information: 2024.5.13 sweep test is good
Accessories: Saran net cloth cover
Main specifications: 3 way 8 ohm maximum input 75 W crossover 2.5 kHz efficiency 87 db W 192 x H900 x D 280 mm 25 kg/book
Maintained! Best buy model from the late 90s. It inherits the traditional diamond actuation circuit, and is characterized by a well-balanced sound with a refined circuit configuration, such as a sense of SN in the mid-high range, and the certainty of the outline in the low range. The exterior has scratches, etc. Serial 608024137 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (input selector, power amplifier direct, reck-out, processor, MM/ MC changeover switch disassembly, polishing grease application, speaker 1/2 tone, ride ness, subsonic switch replacement, output relay replacement, solder repair, protector capacitor replacement, adjustment inspection, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) phono (MM/MC) switching dimensions W432 x H165 x D450 mm weight 18 kg
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. The efficiency is also good, so it's easy to play, and the chic design with the mirror piano paint shines is characteristic. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
The price has been drastically reduced! 2023/5/9 sales price 69,800 yen Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
*The 2-tier rack decoupler spike holder is not included. You can see the attention to design and sound quality at a high level, such as slits that have been carefully thought out for heat dissipation effects and resonance, and solid aluminum pillars. There are some threads and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: W597 x H455 x D475 mm between shelves 326 mm
The price has been reduced! 2024/5/14 sales price 55,000 yen direct drive analog turntable. Equipped with a knife-edge tone arm in collaboration with SAEC. A Sumiko Oyster cartridge is also included, and it also has a built-in phono equalizer, so you can enjoy records right away. The exterior is good with no noticeable scratches. Serial 2280200 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual, AC adapter, connection cord, cartridge, head shell, original box
Main specifications: direct drive aluminum die-cast static balance type S-shaped tone arm length 223 mm needle pressure variable range 0 g to 5.0 g applicable cartridge mass 3.0 g to 12.0 g, 14 g to 23 g (including attached headshell) cartridge part: mm type output voltage 4.0 mV needle pressure 1.5 to 2.5 g mass 5.3 g analog output terminal: RCA pin jack (phono/line switching type) W420 x H117 x D356 mm Weight approx. 6.1 kg
Maintained! The mid-range α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. There are line marks and threads on the exterior. Serial 437100950 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, source switch, MM/MC switch disassembly, polishing grease application, power amplifier circuit transistor, adjustment volume replacement, output relay replacement, power supply part solder repair and other main parts solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (replacement of defective output relay contacts. (Switch and volume contact correction)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg
Exclusive audio rack made of wood fiber plywood and metal posts, with casters. The sturdy construction typical of TAOC is attractive. It is a rack where you can aim for stable sound quality without coloring. The effective height is 180 mm for the upper and middle steps and 230 mm for the lower tier. There are wounds, stains, abrasions, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: load capacity 1 stage 100 kg W600 x H835 x D550 mm 27 kg
The price has been reduced! 2024/5/18 sales price 39800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg [actual measurement)
Network attenuator pair sale inductance 0-2.7-3.4-3.6-3.9-4.7mH allowable input 400W W105 x H92 x 76 mm 1.9 kg/piece with original box (Kojima Yosuke)
Accessories: original box
A backload type enclosure that can mount an unspecified JBL38cm woofer. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
The price has been reduced! 2024/5/16 sales price 35,000 yen This is a headphone amplifier with separate power supply with preamp function. Genuine Naspec It is compatible with most commercially available headphones, and high sound quality playback is possible even with inner-earphones or authentic stereo headphones. There are small scratches and dullness on the exterior. Serial KRHQ1200069/KRHQP120069 (Yonejima Satoshi)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: power cord, connection cord
Main Specifications: Dynamic Range 110dB SNR 115dB Output Impedance 8Ω Body: W185 x D175 x 53mm 1.0 kg Power Supply Unit: H185 x D150 x H53 mm 1.7 kg
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The price has been reduced! 2024/5/14 selling price 29,800 yen British Celestion F series tall boy speaker. It can be used for a wide range of purposes, from AV systems to pure audio. It is a bright tone with a pleasant drop and spread of the midrange. There is no effect on operation, but there is a dent in the mid-range center dome on one side. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual (English characters), saran net, spikes, jumper plates
Main specifications: 3-way bass reflex type output sound pressure level: 90db 8Ω W264 × H920 × D342 mm 20 kg
The price has been reduced! 2024/5/8 sales price 30,000 yen ※The exterior is in poor condition, so it's cheap. This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
An ultra-high purity 6nCu with a digital RCA cable 1.0m pure silver coating is used as a single wire. Double shield structure with soft copper wire braids layered on top of aluminum PET tape. A two-layer sheath structure that controls unnecessary vibrations by covering the outer circumference of the shield with a RoHS-compatible PVC sheath. The exterior is generally beautiful with no conspicuous scratches (Tamai Jun)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator check is good
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Unspecified record player cabinet. Unprocessed The double arm is also mountable, and the construction is solid. If you've been looking for one, please take this opportunity. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W602 x H145 x D535 mm 13 kg (actual measurement)
ELAC's classic MM cartridges. The tone spun out of the gold body is a firm tone, and you can enjoy the subtle high frequencies and the warm MM-like thickness (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: mm type output 5.5 mV playback frequency band 10 Hz to 25,000 Hz needle pressure 0.75 to 1.5 g dead weight 6.5 g
Set of 4 Quadraspires VENT black poles How about for an addition or replacement? There is some paint peeling on the exterior (Tamura Eiji)
Accessories: none
RCA cable 2.0m pair LC-OFC Class 1 is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is impressive with flat, tight bass and smooth high-frequency luster. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/8 sales price 12000 yen ※It is cheap because the exterior is in poor condition. 1 bottle only Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
This is a double arm cabinet DK-2300 ideal for DP-80 and DP-75. The arm board can be easily removed with screws. One side of the armhole appears to be for the SME3012. Compatible models are unknown on the other side, and there is a 30mm diameter hole. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: insulated 70mm laminated plywood twin arm specification W600 x H101 x D 500 mm weight approx. 15 kg
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2023/4/30 sales price 10,000 yen, balance cable, only 1.0m, uses the technology introduced in the 7N-A2070, uses stress-free 6N copper conductors, and thick rhodium plated plugs. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
A long-selling Technica model that includes a shell and cartridge. The sound quality is clear and bright, and it makes popular music in general bouncy. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.21 sound output confirmed
Accessories: original box
Main specifications: VM type playback frequency band 20 to 20,000 Hz output voltage 5 mV needle pressure 1.5 to 2.5 g H26 x W36 x D67.5 mm dead weight 19.5 g (including shell)
A full-range speaker with a high BOSE interior. 1 bottle only. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
1 set of 4 Y rugs It is a screw-tightened metal Y lug terminal that can be easily fixed and is compatible with various core wire diameters and terminal diameters. There is dullness (Mizushima Itsuro)
Accessories: none
Main specifications: core wire strand diameter 1.5 to 4.0 mm, terminal diameter up to 6.0 mm
RCA relay plug Monolaural mono pair. Uses a metal body. You can see the exterior, disappearing characters, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none