The disposal price was lowered. It is not applicable for member discounts. 2021/12/18 selling price 178,000 yen has been maintained. The final model of the P-300 series. MOS FET is used for the drive stage, and you can feel a sense of clarity in the company's traditional, quality-solid sound. From the powerful and powerful sound of the first generation, it has been refined and smoothness is added. Serial K2V427 (Itsuro Mizushima)
Maintenance information: 2021.12.18 Maintenance completed (replacement, solder repair, card edge contact cleaning, BTL switch and so on due to deterioration of mute relay, electrolytic capacitor, semi-fixed VR, etc.) (ATT disassembly cleaning, heat dissipation treatment repair, bias and offset check, output audio output check, BTL operation check, interior and exterior cleaning)
Accessories: copy of instruction manual, power cable
Main specifications: 200W+200W (4Ω) 150W+150W (8Ω) 75W+75W (16Ω) 400W (8Ω) 200W (16Ω) when connecting the bridge Dimensions W445 × H160 × D373mm Weight 22.5 kg
Disposal price has been reduced. Member discounts are not applicable. 2021/8/27 selling price 729,000 yen stereo version of mono power amplifier M-6000. Power MOS FET8 is a power amplifier with parallel push-pull drive. It sounds the speaker lightly so that it does not make you aware of the word driving force, and the texture of the sound entered into the music source is not too much fidelity. Serial D2Y202 (Atsushi Takasaki)
Maintenance information: 2021.8.27 working confirmed
Accessories: Shorter, power cord
Main specifications: 700W/1Ω 440W/2Ω 220W/4Ω 110W/8Ω Frequency characteristics 20-20,000 Hz (rated output) W465 × H221 × D499mm 42.1 kg
Maintenance has been completed at Accuphase! AccuPhase pure A stereo amplifier that employs MOS-FETs. It is a product that has a small output but is particular about the quality at the time of actual use, and you can enjoy the glossy texture of the middle range unique to pure A grade. The moist tone is attractive, mainly chamber music, small organization, and vocals. The exterior is dirty on the top plate, and there is dullness throughout. Serial B3Y669 (Satoshi Yonejima)
Maintenance information: 2022.7.21 Manufacturer maintained (replaced due to meter, logo lamp out, and deterioration. RCA input pin jack LR co-replacement (Inspection of each part, adjustment, safety, withstand pressure check OK)
Accessories: instruction manual, power cable
Main specifications: Pure A grade 20W+20W (8Ω) 2 input systems (1 system each for balance and unbalance) Bridge connection possible W475 × H170 × D426 mm 22.6kg
※The power cable is being arranged. Uses a “power MOS FET,” which has a reputation for sound quality and reliability. Sound quality that is claimed to be an extrusion that is not typical of a company with a high degree of perfection. The driving power is sufficient even for standalone stereo operation, but it can be upgraded to a solemn sound with a bridge connection. The exterior is good with only dullness and no noticeable scratches (Kobayashi Hitoshi)
Maintenance information: 2023.8.25 Operation confirmed
Accessories: Manual copy ※Power cable is being arranged
Main specifications: stereo power amplifier pure A grade operation rated output 60 W+60 W (8 ohms), 480 W/ch 1 ohm load to 60 w/ch 8 ohm load input RCA1, XLR1 speaker output 2 systems damping factor 800 impedance 2 to 16 ohms (stereo specification time) S/N ratio 127 dB (gain switch - 12 dB) W465 x H238 x D515 mm 44.3 kg
The disposal price has been reduced! (Membership discounts are not applicable) 2022/6/19 selling price 178,000 yen AccuPhase pure A class power amplifier. The balance is good even at low volumes, and the tone like a vacuum tube amplifier is unique to pure A class. The warm and mellow tone is also a staple for the mid-high range of multi-amplifiers. As for the appearance, there are scratches on the top plate. Serial B6Y658 (Kimiya Miura)
Maintenance information: 2022.6.19 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: Pure A class stereo amplifier 20W+20W/8Ω input 2 systems (1 system each balanced/unbalanced) Bridge connectable W475 × H170 × D426 mm 22.6 kg
The disposal price was lowered. Member discounts are not applicable. 2022/2/12 Selling price 398,000 yen This is a full change model that enhances the perfection of all P-4100 circuits. The latest instrumentation amplifier system is adopted for the overall configuration, and convenience is also improved by installing a mode selector switch that allows easy bi-amp and bridge connection. The sound of the traditional 4000 series, which has a wide range and high transparency, has been refined. Serial K3Y254 (Itsuro Mizushima)
Maintenance info: 2022.2.12 operation confirmed
Accessories: Instruction manual, power cable
Main specifications: Rated output 90W+90W (8Ω), 180W+180W (4Ω) Load impedance 2-16Ω (stereo) Input RCA1 system, XLR1 system, Speaker output 2 systems W465× H190 × D427mm 28.9kg
Maintained! Accuphase's first mono power amplifier. It's a rugged and firm sound that is backed by its exterior. The crisp, tight bass and sharpness in the mid to high frequencies are appealing. The rough sounds unique to this era go great with jazz. There are dirt and scratches on the exterior. Serial J5Y280/J5Y279 (Kimiya Miura)
Maintenance Information: 2023.6.13 Maintained (NF circuit capacitor, coupling capacitor, resistor replacement deterioration replacement. lamp replacement. Card edge contact cleaning. ATT contact polishing cleaning contact protection oil applied. Increase and tighten the output elements. Pattern and solder correction. Output relay check (good because it has been changed to a sealed type). Bias and offset checks. (Output sound check)
Accessories: copy of instruction manual, power cable
Main specifications: 450W (4Ω) 300W (8Ω) 150W (16Ω) W482 x H170 x D345 mm 27 kg