Unspecified wood cabinet. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W470 x H134 x D310 mm 2.2 kg (actual measurement)
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
Triode line exclusive vacuum tube premain developed with the novel concept of an amplifier for women. With its compact, exquisite size and high design, it can be used in a variety of situations. The exterior is good with only a small scratch and there is little feeling of use. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cable
Main specifications: output 3W+3W (8Ω) vacuum tubes 6BQ5 x 2, 12ax7 x 2, dimensions W190 x D180 x H135 mm weight 4.7 kg
Maintained! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
The price has been reduced. 2024/5/17 sales price 45,000 yen There is a slight gap in the volume, and it will be sold as is. The mid-range is thick and powerful, and it is characterized by analog-like sound quality with a moderate sense of range. It effectively gently relaxes hard sound CD players. The characters on the panel display are slightly off, and the 48khz lamp is misaligned in the back (Takasaki Atsushi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: copy of the manual
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
The price has been reduced. 2024/5/25 sales price 99,800 yen with 2447 exclusive horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
The price has been reduced. 2024/5/29 sales price 44,800 yen This is an attractive quad bookshelf type speaker with a beautiful finish and rich musical expressiveness. The calm stringed instruments and highly textured piano expressions are suitable for classical music. The exterior has a broken dowel in the upper left corner of the saran net on one side, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: saran net, jumper plate
Main specifications: 86dB 6Ω 45Hz to 28,000 kHz W190 × H310 × D243 mm Weight 6.3 kg
A dust cover of the same size as the C-91 compatible with MICRO's BL-91, BL-99V, and SX-111FV. It is a sturdy construction with a thickness of 4 mm. There is an abrasion on the front (Murakoshi Yoichi)
Accessories: none
Main specifications: W523 x H100 x D410 mm
Fully overhauled on 2023/12/13! A JBL professional series speaker that combines the mid-high range of a biladial horn, which is characterized by wide directional characteristics, and a 38cm woofer with excellent low frequency reproduction. It is possible to combine high range stretchability while maintaining 2-way mid-range energy in response to professional field requests. You can enjoy a variety of music, mainly jazz, with excellent punching power that cannot be heard on current speakers. ※The notation on the terminal board has disappeared (Mizushima Itsuro)
Maintenance information: 2023.12.12 Maintained (exterior repair, polishing, oil finish, front and rear baffle, hakama, horn repair, painting. Saran net replacement. Woofer edge replacement/cone paper coating. Driver magnetic circuit gap cleaning, center adjustment, sound-absorbing material replacement, terminal cleaning. Network frequency characteristic check, ATT cleaning, terminal contact cleaning)
Accessories: saran net
Main specifications: 2 way bi-radial horn 2235H/2421A 93db W556 × H908 × D480 mm 79.5 kg
*Needle cover missing. Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g