A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
*Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price.
Accessories: none
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
*Currently sold. Remote control is missing. A powerful machine with thick mid-range and enhanced musicality. We are currently putting in an unimaginable amount of material. It also works well with vintage speakers and amplifiers. There is a feeling of use such as dullness and scratches. Serial 204286 (Takasaki Atsushi)
Maintenance information: 2024.4.10 sound output confirmed
Accessories: copy of the manual
Main specifications: 2 to 20 kHz W430 x H125 x D375 mm 12.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The price has been drastically reduced. 2024/3/31 sales price 29,800 yen ※Currently sold. A model based on the DS-34B with improved sound quality and design. You can listen to a relaxed sound while also having a good cut. The enclosure is very sturdy, and is also equipped with multi-amp connection terminals. There is a feeling of use such as scratches, etc., viscoid sagging under the woofer, and damage to the low negative terminal of the multi. Serial 6676481/6676817 (Takasaki Atsushi)
Maintenance information: 2024.3.30 sound output confirmed
Accessories: saran net
Main specifications: 3 way 3 speaker system, sealed, maximum input, 40 W, playback frequency band, 35 to 20,000 Hz, W420 x H690 x D285 mm, 19 kg
The price has been reduced. 2024/3/26 sales price 29,800 yen 2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The 1.5m power cable has a high attenuation rate of weak vibrations, and the sense of distortion is minimal due to the high rigidity, so the impression is that the sound quality is precise and accurate. Try it with a sound source with a large number of instruments, such as classical symphonies. In addition to the exterior and a lot of friction, you can also see a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: blade beryllium copper (mirror polish) plating, thick silver plating (1.5 μm) + rhodium plating (0.3 μm) finish, chassis, high rigidity PBT (with 30% glass fiber), cover, high rigidity polycarbonate, completely non-magnetic, 125V/15A specification, PSE certified
The price has been drastically reduced. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
A convenient speaker selector that allows you to connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
※It is inexpensive because there is wobble on one side. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg