This is a super dreadnought mono power amplifier. Recommended for those who want to drive large speakers! The sound quality is natural and clearly expresses delicate parts. It is a power amplifier that has driving power and allows you to feel comfortable and at ease. There are small scratches on the exterior, but it is generally good (Ryo Mizusaki)
Maintenance information: 2024.4.30 Maintained (meter acrylic removed, internal glass fog cleaning, all front lamps replaced. (Check that the lamp is on)
Accessories: power cord, instruction manual
Main specifications: 1200W (2/4/8 Ω) speaker output 1 system x 3 (2 ohm x 1, 4 ohm x 1, 8 ohm x 1) input terminal RCA x 1 system, XLR x 1 system, W445 x H313 x D540 mm 66.7 kg/unit
Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals!
Accessories: original box
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
Maintained. This is the highest grade deck in the ES series, bearing the “7,” the final model of the Sony cassette deck. The overwhelming weight and stable operation with a strong body are suitable for a reference machine, and it is also easy to operate intuitively. The sound quality is also sharp, and it is a top level car that achieves both sound and operability. The exterior has line scratches, bumps, and threads. Serial 252215 (Tamura Eiji)
Maintenance information: 2024.4.30 maintained (mechanical drive belt replacement, capstan belt replacement, left pinch roller replacement, head base cleaning and grease up, pinch roller cleaning and grease up, mechanical shaft cleaning and grease up, capstan motor control part electrolytic capacitor replacement. Contact cleaning by detaching the tape half detection switch. Check the tape running path, adjust the left pinch roller height, and check and adjust the playhead azimuth angle. Recording level adjustment volume/BIAS level/EQ volume contact cleaning, Dolby switch contact cleaning, headphone volume replacement, print pattern status check, and additional soldering treatment. Playback level check adjustment, recording level check adjustment, bias level check adjustment, recording calibration operation check adjustment, recording playback test is good, Dolby recording and playback test is good, timer operation test is normal. *Reference value: W&F (WTD): 0.025%, blank residual noise level (-52 dB linear measurement))
Accessories: No accessories
Main specifications: 4 tracks, 2 channels, 3 heads, frequency characteristics, 15 Hz to 22 kHz, W430 x H135 x D380 mm, 12 kg
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Power cable 2.0m PSE standard oxygen-free copper (OFC: oxygen-free copper) is an expressive power cable with high resolution, full of speed (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
※Because it smells like tobacco, it's cheap. 1 bottle only. Balance cable, 5.0 m, Neutrik branded cable, 3 core specification, 8412. The sound is thick and solid throughout the entire range. The exterior smells like tobacco (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
Power cable 2.0m PSE standard oxygen-free copper (OFC: oxygen-free copper) is an expressive power cable with high resolution, full of speed (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
※Because it smells like tobacco, it's cheap. 1 bottle only. Balance cable 4.0m is a standard Neutrik microphone cable. It is also characterized by its soft sound quality and ease of handling (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
※6 month warranty. A PIONEER tall boy speaker with clean sound quality and good balance. It is a model developed for AV use, but it also sounds in a wide range as pure audio regardless of genre. It is a model with high cost performance even as an introductory machine. There are large tape marks on the exterior and back, and a feeling of use such as dullness and bruises can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose)
Main specifications: woofer 16 cm cone type x 2 mid tweeter coaxial 13 cm cone type, 3 cm dome type ribbon type super tweeter 6Ω 89dB W274 x H1075 x D366 mm 37 kg
*Only one speaker cable, 2.5 m, and the unprocessed conductor at the end is a PCOCC-A Acoliba single-wire cable. An air insulation structure that was only used in hundreds of thousands of high-end cables. This cable has high cost performance. There is a feeling of use such as friction on the sheath (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Jumper cable, 0.2m, set of 4, silver conductor (PSS), banana-Y lug terminal specification, there is dullness around the plug (Kojima Yosuke)
Accessories: none