※Since the phono module has been replaced by an external manufacturer, it is inexpensive. Although it is a replacement module, surprisingly, it is comparable to the original LD2. The most famous Mark Levinson preamp. Mid-spectrum winding volume that demonstrates outstanding sharpness. It has vivid and energetic sound quality. The ability to listen with plenty of dynamism has an appeal that cannot be obtained with current preamps. There is a scratch on the wood cabinet and peeling on the back. Serial 1677/0818 (Sasaki Shota)
Maintenance information: 2022.9.15 Maintained (replacement of all domestic capacitors and deteriorated capacitors in the power supply unit, replacement and re-encapsulation of operational amplifier IC defects in the RCH peak meter module, disassembly cleaning for main volume and input volume, external cleaning, operation inspection of attached cables, specification inspection, inspection of each operation. (PHONO contains an alternative module, but there is no operation problem)
Accessories: power cord, connection cord, 3 sets of Remo pins
Main specifications: Phono MM2 system [main body] W482 x H113 x D354 mm approx. 5.5 kg [power supply unit PLS-150] W102 x H113 x D257 mm approx. 2.5 kg
*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor has been replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
A network player compatible with Roon Ready and MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. When used as a USBDAC, DSD 22.5 MHz can also be played. Equipped with volume, it can also be used as a digital preamp (Daiki Goto)
Maintenance information: 2024.5.6 operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
Comes with original box! Currently sold. The urethane inside has deteriorated, so it has been removed. Stax headphone and amplifier set. You can enjoy a very grainy and fresh tone. (Sasaki Shota)
Maintenance information: 2024.5.6 operation confirmed
Accessories: original box
Main specifications: Playback frequency band 30 to 35,000 Hz sensitivity 94 dB SRD-7MK2: W73 ✕ H120 ✕ D215mm weight 1.5 kg
The body is SPU-G, but the needle tip has been replaced with an SPU Classic GE mk2. An SPU that fully conveys the appeal of analog. It is a cartridge that combines the softness of the classic series sound with the strong flavor (Sasaki Shota)
Maintenance information: 2024.5.6 sound output operation confirmed
Accessories: original box (for SPU GE ClassicMK2)
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude Elliptical (elliptical needle) suitable needle pressure 4 g
LUXMAN's discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is in good condition with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.6 continuity confirmed
Accessories: instruction manual
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Among Sony CD players, this model is sharp and has a sense of energy. The sharp sound is fully compatible not only with jazz and rock, but also with modern typed sound sources. There are dullness and scratches on the main body, and discoloration can be seen on the stabilizer*The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: copy of instruction manual
Main specifications: 1-bit current pulse DAC, fixed optical system, zinc die-cast pickup base with 4 types of variable digital filters, frequency characteristics 2 Hz to 20,000 Hz, W430 x H125 x D375 mm, 15.2 kg
Convenient digital needle pressure gauge. It is an excellent product that can measure up to 5g with a high accuracy of 0.01 g. (FUJISAWA KOSHI)
Maintenance information: 2024.5.6 operation confirmed
Accessories: No accessories
Main specifications: 5g dead weight