※It is inexpensive because it has a cigarette smell and tar stains. It is heavier than normal because there is filler in the struts. This speaker stand is optimized for the LS50 series and the company's bookshelf speakers and is tuned to maximize performance. There are scratches and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: spikes
Main specifications: Speaker stand dimensions W226 ✕ H657 ✕ D308 mm, weight 9.3 kg (actual measurement)
Comes with original box! DP-1300M heavy headshell counterweights, set of 2 large and small A must-have item for those using heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. It is recommended for those who use a variety of cartridges. There are some scratches on the exterior (Fujisawa Yukishi)
Accessories: original box
Main specifications: Compatible cartridge weight/for 20 to 28 g (small) /26 to 37 g (large)
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. The exterior has line scratches and tape marks on the bottom (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W450 x D500 x H40 mm approx. 7 kg
The price has been reduced! 2024/4/27 sales price 29,800 yen Krypton speaker stand. It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm top plate W200 x D260 mm weight 7.2 kg/unit
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
※The felt is attached upside down. Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. Only 1 out of 4 has butyl rubber attached to the inside. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g