Replacement needle for Sony VX-50G Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony XL-250G This is an ND-250G compatible product. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SONY ND-220G compatible replacement needle. Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony XL-20G ND-200G compatible Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VL-14GS (2) ND-14G compatible Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VL-43G (S). This is an ND-143G compatible product. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SONY ND-136G compatible replacement needle Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VM-32G This is an ND-134G compatible needle. Operation has not been confirmed since there is no main unit (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Sony VM-8GS replacement needle ND+-108G compatible Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
A direct drive record player equipped with an Orthophone 2M RED as standard equipment. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (there are times when it is not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: subway, copy of instruction manual, EP adapter
Main specifications: quartz lock direct drive, full manual, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 Operation confirmed.
Accessories: power cord, connection cord, EP adapter, weight sold separately, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
Sapphire replacement needle for Columbia desktop players There is no main unit and operation has not been confirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/21 sales price 1,398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Ryo Mizusaki)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no conspicuous scratches*Additional terminals have been added, but they cannot be used for both input and output (Sasaki Shota)
Maintenance information: 2024.5.26 Operation confirmed ※Additional terminals cannot be used for both input/output
Accessories: none
Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
The disposal price has been reduced. Member prices are not applicable. 2023/9/23 sales price 118,000 yen This is a high sound quality studio preamp with feedback on design and development technology for professional consoles and DC power amplifiers. It has a high-grade design, such as an input level equipped with a large machined aluminum knob, monitor level volume, an R core transformer, and a luxurious power supply unit using a large capacity capacitor. There are hit scratches and line scratches overall (Daiki Goto)
Maintenance information: 2023.9.23 Operation confirmed
Accessories: power cable
Main specifications: Input SOURCE INPUT 4 stereo systems (1 of which is balanced input) DECK INPUT stereo 4 systems output MONITOR OUTPUT stereo 2 systems (1 of which is balanced output 2 hot) DECK OUTPUT stereo x 4 W483 x H181 x D44 mm 3.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit
* There are adhesive marks on the main body, the tweeter is dead, etc., so it is inexpensive and is currently sold. If you're a Technics fan, you should try the SB-7000 at least once! It is made with a linear phase design and expresses excellent directivity. Although it is flat and has a wide range, it is highly efficient, so it can handle a full range of genres regardless of the amplifier. The exterior has adhesive marks, dirt, and small scratches. Shipping costs will be estimated separately (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 3-way bass reflex 6Ω 93dB linear phase speaker system W480 x H845 x D410 mm 36 kg
The power cable uses DIP FORMING oxygen-free copper wire with HSE treatment, which is an advanced burn-in treatment, applied to the 1.8 m conductor. The S/N is extremely high, and the strong sound in the low range is also an extremely attractive, high cost performance model. There is a film defect on part of the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
※Only 1 network coil attenuator Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece There is distortion in the washer part (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/11 sales price 148,000 yen The BBC monitor speaker is equipped with an in-house manufactured unit based on the LS3/5A, and the phase characteristics and frequency characteristics of the mid to low range, and the responsiveness of music signals have been greatly improved. You can listen to traditional English sounds with a sense of calm. The exterior has a feeling of use such as dullness and small scratches. Serial 206B08481 206B08482 (Tomonori Asaine)
Maintenance information: 2024.5.11 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers sealed crossover 5 kHz impedance 8 ohms frequency characteristics 75 Hz to 20 kHz output sound pressure level 84 dB input terminal 4 mm terminal bywire compatible W165 ✕ H305 ✕ D 190 mm weight 4.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 198,000 yen Maintained! A 2-way system equipped with a large horn and professional driver typical of JBL. You can enjoy the exhilarating feeling unique to JBL with good extrusion in the mid and low frequencies and wide dynamic range of sound reproduction. It is an easy-to-use speaker that has a characteristic that produces sound with good momentum, and does not require an amplifier. Serial J089-012209 J090-012208 (Murakoshi Yoichi)
Maintenance information: 2024.5.14 maintenance (exterior repair/cleaning, top plate painting. Saran net replacement, woofer edge replacement, driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement)
Accessories: saran net, jumper
Main specifications: 2 way, 2 speakers, bass reflex system, floor type frequency band 32 to 2 kHz, crossover 950 Hz, sound pressure level 92 dB, 6 ohms, W561 x H985 x D406 mm, 52.3 kg/book
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The price has been drastically reduced. 2013/7/23 sales price 298,000 yen Edison disc phonograph. It's a name given by Edison, who created the gramophone, and there seems to be an anecdote where he was amazed and jumped up when he first heard the sound from a cylindrical gramophone he made himself. You can't enjoy the indescribable atmospheric sound anywhere else. A horn that is one size larger than the H19 is used. The exterior also has cracks, peeling, and cracks on the veneer due to aging. Also, rust is conspicuous on the wheels underfoot (Oikawa Tetsuji)
Maintenance Information: 2013.7.23 Maintained
Accessories: handle, snail
Main specifications: horn opening W392 x H260 mm main body W484 x H1140 x D500 mm
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
A single-by-wire rocket series entry model with a 3.0 m pair of banana plugs at the end of the speaker cable. Divided into 4 conductor paths, the sound quality is more dynamic with a structure that suppresses malignant interactions that occur between the 2 conductors. Also, although it is composed of a semi-single-wire conductor arrangement, it has a highly flexible cable structure. There are abrasions etc. on the sheath (Kojima Yosuke)
Accessories: original box
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The 1.2m pair of unprocessed speaker cable has excellent balance from low to high frequencies, and has an energetic and warm tone. There are threads and disappearing characters on the exterior (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The fact that it is compatible with various cartridges with a counterweight setting, such as being mounted on a Michell Engineering analog player, seems useful. The general counterweight is 85 106 131 grams. The cost performance is high. You can see a feeling of use such as appearance, dullness, abrasions, rust, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 continuity confirmed
Accessories: instruction manual, original box
Main specifications: Cartridge weight 2.5 to 15.5 g (including cartridge mounting screws)
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
※1 bottle only. Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, dullness, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
The price has been reduced. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
The price has been reduced! 2024/4/5 sales price 500 yen The sound quality of only one 2.0m QED speaker cable feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
Maintained! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior, noticeable scuffs on the top plate, scratches on the VOL dial, and stains on the back of the front flap, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 Maintained (main volume, balance volume internal contact cleaning, cleaning. All input terminals are polished and cleaned, electrolytic capacitor replaced, PHONO2 impedance changeover switch disassembly, contact polishing, cleaning, and grease is applied. (Check the operation of each input/output)
Accessories: instruction manual (copy)
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg