※It's cheap because it's missing! An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. The exterior has a feeling of use such as dullness, scratches, and angles (Asaine Tomoho)
Accessories: none
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Asae Tomoho)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
Pioneer headphones. Seemingly sealed, it is characterized by a high density, clear, and unobtrusive sound. The exterior has a feeling of use such as discoloration, dullness, dirt, rust, etc. (Tamai Jun)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: dynamic diaphragm, 70 mm cone, playback frequency band, 20-20,000 Hz, cord, 2.5 m, weight: 380 g
※1 bottle only. By adopting a diaphragm with a weight of 0.03 g or less and a magnetic circuit with a strong magnet that makes use of the characteristics of the 1000m tweeter berylum material, we have achieved smooth frequency characteristics and excellent start-up even at the high end. The sharp, realistic sound quality is a fresh and transparent sound. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: size W115 x H45 x D115 mm 0.9 kg (actual measurement)
Good level! A record player system with Ikeda's long-arm IT-407 attached to the SX-1500 superlative armless model with air floating+vacuum. The heavyweight turntable rotates while levitating 0.03 mm with the same floating structure as the SX-8000 /2. The vacuum function also works well. There is no mechanical noise, and the precision, which can be said to be the finished form of an analog player, is attractive (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: strobe, instruction manual, EP adapter, thread, platter handle, arm original box, 2 shaft fixing columns, hex wrench
Main specifications: IT-407: total length 388 mm effective length 307 mm mounting hole diameter 31 mm cartridge shell balance range 6 g to 38.5 g arm base: AX-6G SX-1500FVG: 33, 45 rotation base frame RB-1500 · W330 x H85 x D330 mm motor unit RY-1500D · W180 x H130 x D315 mm air pump RP-1110 · W200 x H210 x D350 mm Total weight 44.7 kg
This 2-way bookshelf with monitor audio will be introduced for the first time in Hi-Fi. Pursue sound quality with the C-CAM unit introduced in the Bronze Series. The high cost performance and sound typical of the company are attractive (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: instruction manual, saran net, bath reflex sponge, jumper, original box
Key Specifications: 2 Way 8Ω 85dB Crossover 2,500Hz W166 × H281 × D268 mm 5.0 kg
Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.10 operation confirmed
Accessories: none
Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of the ReSona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
Maintained! A popular model from late Sansui. While promoting wider range, the sound that feels the depth and energy unique to the company is compatible with modern speakers. The punching power in the mid to low range that drives a medium bookshelf speaker is truly a word. There is a feeling of use such as dullness and abrasions (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/TONE, loudness, subsonic, processor, input selector, power amplifier direct, source direct, tape, reckout switch disassembly, polishing grease application, output relay replacement, power supply capacitor replacement, solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
Maintained! A class mono power amplifier developed for wideband playback. It boasts a natural and smooth playback sound, and you can feel the strength you wouldn't think of 20W. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance details/output relay replacement for 2 units, level switch disassembly, polishing grease application, solder repair, interior and exterior inspection and cleaning, DC adjustment, running test.)
Accessories: none
Main Specifications: 20W+20W (8Ω) Pure Class A Amplifier Frequency Characteristics DC to 200kHz Pure Copper Machined SP Terminal Equipped W224 x H103 x D390 mm 6.5 kg
Maintained! A high-performance preamp developed by Onkyo in the early 1980s. It is equipped with 3 types of cartridge selectors for 2 Phono inputs, making it a great specification for analog users. The way the dry mids sound is reminiscent of the sounds of the 60s and 70s. There are conspicuous line marks on the top plate and dents on the corners (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/indicator lamp replacement, mode, recoup, input selector, cartridge selector, subsonic switch disassembly, polishing grease application, operational amplifier replacement, solder repair, each volume, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: input LINE3 system PHONO2 (MM/MC) system power consumption 26W dimensions W450 x H990 x D403 mm weight 9.5 kg
A cartridge designed by the V15 type3 development team, which is synonymous with light needle pressure needles. The sound quality with a high degree of perfection, which achieves both the subtlety of MC cartridges and the stretchy sound quality due to light needle pressure elliptical needles, is attractive (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: mm type output voltage 4.7 mV needle pressure 0.75 to 1.5 g playback frequency band 20-20,000 Hz channel separation 25 dB channel balance 2 dB DC resistance 1.55 kΩ dead weight 6 g
※It is inexpensive because it is in poor condition such as chips or cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. The exterior has dirt, cracks, chips, holes, etc. (Tamura Eiji)
Accessories: none
D/A converter with a built-in “ES9038PRO.” This model has a compact design, is compatible with MQA, high-resolution, and DSD sound sources, and has excellent cost performance. Desktops etc. are the worst. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, AC adapter
Main Specifications: Input: USB/OPTICAL/COAXIAL/BLUETOOTH USB: 44.1 to 768 kHz/DSD64 to 512 OPTICAL/COAXIAL: 32 to 192 khz W100 x H62 x D192 mm Weight 0.58 kg
1650 series SACD/CD player It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cable
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
This bookshelf is made in England using solid wood veneer for reinforced MDF. The plumpness of the low range has been handed down since the 12th era, and the low range, which has a rich sense of volume, is attractive when it is small. You can enjoy natural sounds suitable for vocals and classical music. The exterior has scratches and several dowels broken in places on the saran net. Serial 00342B (Yonejima Satoshi)
Maintenance information: 2024.5.9 sweep test is good
Accessories: saran net
Main Specifications: Model: 2 Wave Reflex Type Crossover Frequency 2.2 kHz Output Sound Pressure Level 86 dB Rated Impedance 6 Ω Playback Frequency 45 Hz to 28 kHz W205 x H330 x D253 mm Weight 7.6 kg/book
※It is inexpensive because it is in poor condition such as chips or cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. The exterior has dirt, cracks, chips, holes, etc. (Tamura Eiji)
Accessories: none
In addition to the flat characteristics of DL-103 yuzuri, this MC cartridge is attractive for its transparency and good granularity. Amorphous boron used in high-grade models DL-1000A and 305 is used for the cantilever. The cantilever does not bend, and the stylus is good (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output 0.12 mV playback frequency 20 Hz to 60,000 Hz needle pressure 1.2 g to 1.6 g impedance 40 ohms dead weight approx. 5.6 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Woofer edge softening treatment! A classic model that uses carbon graphite for the woofer's cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
※There is magic writing, and the logo plate is out of stock, so it's cheap. Good stylus! This is the first product of Audio-Technica, an MM type stereo cartridge that became a long-time seller for its well-balanced, natural sound. (MURAKOSHI Yoichi)
Maintenance information: 2024.5.7 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 1.0 to 3.5 g (optimal 2.5 g) playback frequency band 20-21,000 Hz± 3 dB load resistance 50 kΩ DC resistance 450 Ω impedance 1.8 kohm/1 kHz needle tip 0.7 mil dead weight 9.5 g
Maintained! The balance between thickness and sharpness of the sound is good, and the sound conveys the breath of jazz and rock. The thick sound image and rich mid-range, which cannot be enjoyed with today's amplifiers, are exquisite. The range is moderate but the Old McKinn sound has instantaneous power. The slightly smokier tone than the MC2500 is attractive. As for the exterior, in addition to wear and tear and dullness over time, yellowing can be seen. Serial 5Y353 (Yamato Yuki)
Maintenance information: 2024.5.9 maintained (power stage Tr short, output boat, Tr in input board, capacitor, lamp broken, RCA, switching SW replacement SW, VOL cleaning, input shield cable ground solder treatment)
Accessories: Power cord, copy of English instruction manual
Main specifications: 300W+300W (mono 600W) 0.5 to 16 ohms W483 x H267 x D432 mm 58.1 kg
Balance cable, 3.0 m pair, oxygen-free copper, OFC Ritz line type, 2-core shield structure, a quiet, and beautiful sound without falsehood. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of Revisona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
Maintained! *Remote control is out of stock. A control amplifier that inherits the sound of Yamaha's famous C2a. It uses a highly reliable phono equalizer, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. There is overall dullness and small scratches (Tomoho Asaine)
Maintenance Information: 2023.12.8 Maintained (PHONO circuit repair adjustment. Power supply circuit input circuit and other circuit board soldering correction. Disassemble the PHONO switch and polish the contacts and apply contact cleaner. Contact correction for other volume types. (Long time sound check)
Accessories: copy of the manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
Maintained, including the creation of a new dust cover. A record player that uses a micro belt drive system. The arm is the company's MA-505X. You can enjoy the goodness of analog with a combination of a turntable, which has a reputation for stability and good sound separation, and an arm with good sensitivity and sound. The metal part has dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.8 Maintained (motor disassembly, brush cleaning, oil application to bearings, platter bearing cleaning, internal bearing ball replacement. Arm disassembly and cleaning, bearing replacement, assembly adjustment. Electrolytic capacitors and semi-fixed resistors were replaced. Disassemble and clean the VOL for speed adjustment. Insulator created. Turntable rotation speed adjustment, arm needle pressure check. Check the sound output. Exterior cleaning, comprehensive operation confirmation inspection, new dust cover creation)
Accessories: copy of instruction manual, EP adapter
Main specifications: belt drive turntable diameter 30.6 cm, 3.2 kg speed fine adjustment range ± 3% W496 × H155 × D400 mm approx. 12 kg
The price has been reduced! 2024/5/8 sales price 348,000 yen This model is a new reference model for Technics direct drive turntable systems. Stable rotation and reduced vibration are achieved by adopting a coreless direct drive motor. Please enjoy the moment of interacting with music through the rich sound of analog records with this model. There is a thread on the dust cover on the exterior. Serial GM2fa001044 (Fujisawa Yukishi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: instruction manual, power cord, connection cord, 2 types of auxiliary weights
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
A typical woofer attached to first-class products such as the Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. The exterior has dullness and small scratches. Serial OA8600/OC8677 (Yonejima Satoshi)
Maintenance information: 2024.5.8 sweep test good
Accessories: instruction manual
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1 unit
※The pedestal is missing. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator check is good
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. The exterior has bald paint, dirt, etc. Serial 20444/20547 (Tamura Eiji)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
※The exterior is in poor condition, so it's cheap. This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
※Inexpensive because it is in poor condition. Surround system by the brand NIRO by Nakamichi Jiro, the former president of NAKAMICHI. 5.1 channel surround is achieved with a single speaker and subwoofer. A reference model using a full digital amplifier with thorough sound quality measures. You can see a feeling of use on the exterior, stains on the saran net, deposits on the top plate of the woofer, and dullness, scuffs, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 sound output confirmed
Accessories: remote control, instruction manual, upgrade software
Main specifications: 3 input optical systems, 1 coaxial system, 2 analog speaker output 30W x 5ch, subwoofer 50W compatible formats DOLBY DIGITAL, DTS, AAC, DOLBY PRO LOGIC2 speaker 8cm full range sealed 8Ω woofer 20cm cone 6Ω body W200 x H55 x D296mm 2.2 kg, speaker W318 x H117 x D201 mm 3.4 kg, woo Fur W297 x H327 x D297 mm 6.5 kg
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Serial 646494 (Fujisawa Yukishi)
Maintenance information: 2024.5.7 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The 2.4 m pair of speaker cable uses high-purity OFC (oxygen-free copper), which has little electrical resistance, as the unprocessed core wire, and the stranded wire part is impregnated with a gold colloid liquid with high purity dispersion of ultra-fine gold particles of 3.5 to 8 nanometers, making it a well-balanced sound quality. (FUJISAWA KOSHI)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: No accessories
The dirt, tobacco smell, and feeling of use are conspicuous, so it is currently sold. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
The 1.5m pair speaker cable terminal has a high quality banana plug specification 4-core (card) structure by Studio R31 and features sound with a wide dynamic range, which is unusual for domestically produced models. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: none
An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By attaching it, the sound of a horn that is too strong is moderately diffused and calmed down. There is dirt, dullness, etc. (Oikawa Tetsuji)
※Since the phono module has been replaced by an external manufacturer, it is inexpensive. Although it is a replacement module, surprisingly, it is comparable to the original LD2. The most famous Mark Levinson preamp. Mid-spectrum winding volume that demonstrates outstanding sharpness. It has vivid and energetic sound quality. The ability to listen with plenty of dynamism has an appeal that cannot be obtained with current preamps. There is a scratch on the wood cabinet and peeling on the back. Serial 1677/0818 (Sasaki Shota)
Maintenance information: 2022.9.15 Maintained (replacement of all domestic capacitors and deteriorated capacitors in the power supply unit, replacement and re-encapsulation of operational amplifier IC defects in the RCH peak meter module, disassembly cleaning for main volume and input volume, external cleaning, operation inspection of attached cables, specification inspection, inspection of each operation. (PHONO contains an alternative module, but there is no operation problem)
Accessories: power cord, connection cord, 3 sets of Remo pins
Main specifications: Phono MM2 system [main body] W482 x H113 x D354 mm approx. 5.5 kg [power supply unit PLS-150] W102 x H113 x D257 mm approx. 2.5 kg
The body is SPU-G, but the needle tip has been replaced with an SPU Classic GE mk2. An SPU that fully conveys the appeal of analog. It is a cartridge that combines the softness of the classic series sound with the strong flavor (Sasaki Shota)
Maintenance information: 2024.5.6 sound output operation confirmed
Accessories: original box (for SPU GE ClassicMK2)
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude Elliptical (elliptical needle) suitable needle pressure 4 g
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Among Sony CD players, this model is sharp and has a sense of energy. The sharp sound is fully compatible not only with jazz and rock, but also with modern typing sound sources. There are dullness and scratches on the main body, and discoloration can be seen on the stabilizer*The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: copy of instruction manual
Main specifications: 1-bit current pulse DAC, fixed optical system, zinc die-cast pickup base with 4 types of variable digital filters, frequency characteristics 2 Hz to 20,000 Hz, W430 x H125 x D375 mm, 15.2 kg
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 017958921760022AC, 017958921760021BC (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
Vintage German speaker with Alnico magnets. A tasteful character that reproduces the good sound quality of a dry texture. If you play it with a vacuum tube amplifier, it seems that you can expect even more sexy and glossy sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: saran net
Main specifications: sealed 2-way full range+ tweeter with Alnico magnet W257 x H470 x D165 mm 5.5 kg (actual measurement)