Victor DTS-2 compatible Replacement needle for DTS-2 and STS-2 Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
RCA cable, 1.0 m pair, 2-core shield structure, rhodium-plated plug suppresses sound dramatization and reproduces the individuality of the amplifier or player as it is. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
Maintained! A best-selling control amplifier using C-280 circuit technology based on the C-200X. You can enjoy tight low frequencies, sharp mid to high frequencies, and sharp sound. The sound image is tighter than the current Accuphase, and the straight sound is also attractive. There are exterior, dullness, and small scratches (Yonejima Satoshi)
Maintenance information: 2024.5.11 Maintained (tone switch, output switch disassembly contact cleaning contact grease application, push switch disassembly contact cleaning grease application, other switches, volume contact cleaning. Electrolytic capacitor replacement. Offset voltage regulation. (Check the operation of each input/output)
Accessories: instruction manual
Main specifications: PHONO input x 3 systems (MC, MM compatible) TAPE x 3 systems PRE OUT x 2 systems W445 x H160 x D373 mm 13.6 kg
Maintained by the manufacturer. It has an aspect as an entry model, but it is a model where you can fully enjoy the uniqueness of Accuphase. In addition to the wide range, it is supple and has a slight sex appeal, so you can enjoy it for 12 minutes. A powerful unit that sounds regardless of whether it is a large or medium speaker. In addition to conspicuous marks on the exterior and top plate, a feeling of use such as dullness, stains, and threads can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 manufacturer maintenance (push switch, volume, etc., cleaning, parts replacement, decorative plate installation, inspection of each part, adjustment, safety check, pressure resistance check)
Accessories: power cable, remote control, manual
Main specifications: 100W+100W (8Ω) parallel push-pull output stage current feedback amplifier circuit W475×H170×D424mm 21.4 kg
Accuphase's core preamp. It inherits the design technology of the higher-level model C-2800 and is equipped with AAVA volume control. You can enjoy high transparency and pure sound with fine particles typical of Accuphase. Exterior, small scratches on the INPUT selector dial, scratches on the left corner of the front window, small scratches on the remote control, dullness, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord, original box
Main specifications: 7 line preamp input systems (RCA x 5, XLR x 2), 3 output systems (XLR x 1, RCA x 2) W465 x H150 x D405 mm 16.2 kg
Balance cable, 3.0 m pair, oxygen-free copper, OFC Ritz line type, 2-core shield structure, a quiet, and beautiful sound without falsehood. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
The price has been drastically reduced. 2024/5/12 sales price 238,000 yen Accuphase power conditioner. PS-500 upgraded model. The sense of transparency increases, and the way stillness and motion are drawn is more delicate. It is recommended for those who are thinking about upgrading the power supply area. There are dents and stroke marks on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output capacity 510V (continuous) rated output voltage AC100V±2V rated output current 5.1A output frequency 50/60 Hz (synchronized with input frequency) instantaneous current supply capacity 70A input voltage range AC90 to 110V power consumption at no load 55 W 475 W x 180 H x 394 Dmm 23.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 AccuPhase CD player with sales price 148,000 yen. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, copy of manual
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
It is a Schumann resonance wave (7.83 Hz) generator that increases the S/N ratio by canceling electromagnetic waves etc. generated from the entire audio equipment. To use it, power the included AC adapter from an electrical outlet and place the main unit as high as possible in the room (1 m 50 cm or more). There is no noticeable damage to the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Operation confirmed (power can be turned on, effect not measured)
Accessories: power cable
Main specifications: Schumann resonance wave (7.83 Hz) generator input voltage 12V W140 × D170 × H50 mm 220 g
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
The disposal price has been reduced (member prices are not applicable). 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
Digital cable, 1.0m, RCA terminal, zero crystal silver conductor, has good sound accuracy for faint sounds, and is characterized by a steady sound. It is a cable that can be obtained at a relatively low price among the company's cables, which have many high price ranges (Kojima Yosuke)
Accessories: none
PSE standard product ACROLINK POWER CONNECTOR Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
Speaker cable, 1.9 m pair, sold out type, untreated ends, Acrolink 6N series, which is natural and has no habit. At first glance, it's no different from the S1000/2, but the sheath diameter is one size larger and the conductor is extremely thick. The sense of transparency, moderate sound pressure, and a flat yet firm, thick sound are attractive. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke)
Accessories: none
Balance cable 1.0m pair stress-free 6N conductors Sound quality that is thicker than AcroLink and has a natural texture that shines with good balance. It is a character that is compatible with a wide range of devices. In addition to cracks in the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: none
Main specifications: W20mm×H5mm×D20mm
This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
An XLR cable 0.6 m pair uses the world's most advanced virtual coaxial structure, and by using the same structure as a line cable as well as a microphone cable, it achieves low capacitance and broadband transmission (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 6,500 yen. Internal Wiring Cable 2.0m Alpha Internal Wiring Cable It is a single-ply and popular black enamel (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has dullness and small scratches due to aging (Yonejima Satoshi)
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
※The exterior is in poor condition, so it's cheap. 1 bottle only. Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
※The exterior is in poor condition, so it's cheap. This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The price has been drastically reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
It has been fully maintained with attention to detail, from exterior painting to gap cleaning! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Murakoshi Yoichi)
Maintenance information: 2024.5.14 maintenance (exterior painting, new saran net replacement, unit maintenance (magnetic circuit rust removal in both low and high ranges, in-gap cleaning, center adjustment, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal contact cleaning) unit detachment, terminal replacement, new wiring)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
The price has been drastically reduced. 2024/3/18 sales price 79,800 yen ALTEC's royal unit used in A7 etc. It's a woofer with a good sense of clarity and a light sound. It has a sense of dynamism and goes well with jazz and rock (Shota Sasaki)
Maintenance information: 2024.3.18 sweep test good
Accessories: none
Main specifications: 38cm ferrite magnetic woofer, 97db, 8Ω, 20Hz to 1600Hz, weight 9.4 kg, baffle opening diameter 35.9 cm
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
HDMI cable, 3.0 m, is an affordable HDMI cable with a wired cord from Amazon Basic. Details will be unknown (Tomoho Asaine)
Maintenance information: 2024.5.3 unchecked
Accessories: none