The price has been reduced! 2024/5/13 sales price 84,800 yen ※The rubber on the saran net cloth cover is fully stretched, so it's cheap! LINN tall boy speaker. It is a speaker with a relaxed, mature sound like a circle, and the more you listen to it without decoration, the more delicious it is. There is a feeling of use on the exterior due to scratches, dullness, etc. ※The active module is not included. Serial 004963 004964 (Tomonori Asaine)
Maintenance information: 2024.5.13 sweep test good
Accessories: Saran net cloth cover
Main specifications: 3 way 8 ohm maximum input 75 W crossover 2.5 kHz efficiency 87 db W 192 x H900 x D 280 mm 25 kg/book
The price has been drastically reduced! 2024/5/13 sales price 108,000 yen Speaker from Taiwanese manufacturer Usher Audio with a unique design. There is subtlety and stretchiness in the mid to high frequencies, and the bouncy, tense sound in the low frequencies is attractive. It is a model that works very well with current pop and piano sounds when played clearly with a powerful amplifier. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.5.13 operation confirmed
Accessories: Saran net spike spike receiving jumper plate
Main specifications: 3-way 3-speaker bi-wire specification 8Ω 87dB 25Hz to 28,000 Hz W350 x H1250 x D650 mm 58.2 kg
Audio-Technica universal tone arm for broadcast stations. The lead wire inside the arm uses silver wire with a Teflon coating. This is such a masterpiece arm that was later reprinted for a limited time. The exterior is slightly dull, but it is good for the model year (Murakoshi Yoichi)
Maintenance information: 2024.5.13 operation confirmed 2024.2.27 operation confirmed, IFC weight thread replacement
Accessories: copy of instruction manual, connection cord, armrest, hex wrench
Main specifications: static balance type, execution length 257 mm, compatible cartridge, 13.5 to 33 g (including shell), needle pressure range 0 to 3 g
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Vibration-absorbing insulators, set of 8, type S with emphasis on vibration absorption, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Asaine Tomoho)
Accessories: none
Main specifications: W20mm×H5mm×D20mm
※Chips and oxidation are conspicuous in the horn part, so it is inexpensive. A tweeter representing JBL. It gives an expression with a greater sense of depth and breadth than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
Nagaoka's self-adhesive record cleaner. This self-adhesive record cleaner uses special rubber to remove dust and dirt from the bottom of the sound groove. Dirt on the roller is removed by washing it with water, and it can be used over and over again. The exterior is relatively good (Yonejima Satoshi)
Accessories: storage case
Main specifications: case size W106 x H44 x 100 mm 133 g (including case)
*Currently sold. It is a CD player equipped with Victor's own DD converter and K2 interface. It is an ambitious work incorporating the manufacturer's unique technology even within the popular price range. The rich sound field expression and the supple texture of the sound are attractive. The exterior has small scratches and dullness. Serial 17405073 (Yonejima Satoshi)
Maintenance information: 2024.5.13 operation confirmed
Accessories: remote control, instruction manual
Main specifications: W435 × H130 × D341 mm 7.5 kg
This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has dullness and small scratches due to aging (Yonejima Satoshi)
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
S terminal cable 2.0m model number unknown, S terminal cable from Audio-Technica's FINE GOLD series. Uses OFC line. There are many dull stains on plugs and shields (Murakoshi Yoichi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
I checked Blu-ray, DVD, and CD playback with a simple check. Since it is cheap, it will be sold as is. A high-end Blu-ray disc player from 2008. Equipped with a high image quality circuit CREAS with 14 bit processing. You can enjoy SONY-like sound quality that is clear and has good cuts (Murakoshi Yoichi)
Maintenance information: 2024.5.10 simple sound output, video output confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: compatible media · BD/DVD-R/-RW/+RW/+R card slot no LAN terminal · no DV terminal · D terminal x 1 · optical D audio x 1 · HDMI terminal x 1, no 3D video compatible W430 x H125 x D365 mm 10 kg
HDMI cable 1.0m 4K/8K, UltraHD, eARC, 48Gbps compatible HDMI cable It is backwards compatible and can also be used with devices older than HDMI 2.0 (Murakoshi Yoichi)
Accessories: none
Currently sold. The BEHRINGER DEQ2496 is a digital processor ideal for people who want to make quick and easy settings, since most of the equipment required for a PA system is completed with this one unit. It is a convenient item equipped not only with an equalizer and compressor/limiter, but also with functions that automatically remove frequency correction and feedback (Murakoshi Yoichi)
Maintenance information: 2024.5.9 sound output confirmed (details unchecked)
Accessories: instruction manual, power cord, original box
Main specifications: W480 x H42 x D210 mm 2 kg
2.0m optical cable DVD LINK series optical cable Highly efficient transmission has been achieved through round processing of terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: none
※Since it is an old standard, it is inexpensive. HDMI cable 3.0 m gold plate coated terminal uses a flat structure to avoid signal loss, crosstalk, and timing errors caused by uneven length when bent (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. Small scratches are scattered on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: instruction manual (copy)
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
An enclosure that imitates a Super Swan. FOSTEX FE-108ES was mounted. It is designed so that the bass reflex port can be opened and closed. There is a feeling of use such as scratches (Daiki Goto)
Main specifications: W380 x H1015 x D345 x mm weight 13.4 kg (actual measurement)
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
FOSTEX aluminum horn tweeter A horn tweeter with an Alnico magnet, horn type, and attractive specs with high efficiency. It is sharp and has excellent penetrating power. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: none
Main specifications: Hard aluminum alloy diaphragm, Alnico magnet, frequency characteristics, 5kHz to 35kHz, impedance 8Ω, output sound pressure level, 106 dB, recommended crossover, 7 kHz, baffle opening dimensions: 61 mm, weight: 720g
Maintained! A power amplifier using the AB/LR independent power supply system, which is a further development of the A class B class 2 independent power supply system. Contrary to its solid appearance, it has a beautiful sound with a sense of transparency. The sound quality is moderately tight and firm, and it naturally handles crisp and energetic intonation expressions. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Maintained (replacement of defective output relay contacts. (Replace deteriorated capacitors in power supply circuits and other circuits)
Accessories: none
Main specifications: 100W+100W (8Ω) compatible speakers 4Ω to 16Ω SNR 110dB W420 x H166.5 x D300 mm 19.2 kg
The price has been drastically reduced. 2024/5/13 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. There is a thin scuff (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: jumper plates, spikes
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
Comes with original box and is in excellent condition! Limited production of 2000 pieces, DL-103 special model. High-grade specifications that use pure gold for the coil and use a special resin containing carbon for the body. Compared to the normal 103, the thick, thick sound from bass to medium is attractive. Not only for collection purposes, this cartridge is worth listening to (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box
Main specifications: Generator coil, pure gold wire body, carbon fiber reinforced case, MC type, output voltage 0.25mV, proper needle pressure, 2.2 g to 2.8 g, dead weight 9.3 g
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Mono exclusive MC cartridge. It's not flashy, but it stretches and makes a gentle sound that is pleasant. There is a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.5 mV needle pressure 2.5 to 4.5 g dead weight 5 g
A horn type tweeter that is an improved model of the JA-0506. Alnico magnets are used for the magnetic circuit, and hollow-out aluminum is used for the horn part. A hard duralumin V-shaped ring diaphragm is used for the diaphragm. The sound is bright and clear (Daiki Goto)
Maintenance information: 2024.5.13 (operation confirmed)
Accessories: original box
Main specifications: horn type tweeter unit Alnico magnet 0.23 kg impedance 8 ohms playback frequency band 3 kHz to 20 kHz recommended usage band 5 kHz or more rated input 1 W maximum input 2 W sound pressure level 109 dB
Speaker stand for B&W 805D series Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the goal of suppressing speaker stress by absorbing and releasing it without applying a load due to the diamond formation structure (Daiki Goto)
Accessories: spikes, T-PROP
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
Maintained by the manufacturer! A system in which Denon's DP-5000F phono motor and SAEC tonearm WE-308, which is highly regarded for its high accuracy, are mounted on the cabinet Lead-console Type2. The DP-5000F is a high-performance phono motor that inherits the elegant and unique design of the previous model DP-5000 and has the same performance as a commercial device, and also adds ease of use and reliability. The WE-308 uses hard rubies for double knife-edge bearings, and is characterized by crisp, clear sound and accurate sound image localization. Furthermore, heavyweight cartridges can also be used with self-made subweights by the previous owner (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Denon maintained (30 defective transistors replaced, speed adjusted)
Accessories: Heavyweight
Main specifications: DP-5000F: servo type direct drive WE-308: double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g W510 x H210 x D456 mm (actual measurement)
Maintained by the manufacturer! Denon's highest-model phono motor at the time. They are orthodox and have a high sense of stability, such as a turntable with a double structure and DENON's traditional AC servo motors. There are dents in places (Oikawa Tetsuji)
Maintenance information: 2024.5.12 manufacturer maintained (head gap adjustment, speed adjustment. (Inspection of each part, operation test)
Accessories: copy of instruction manual
Main specifications: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, die-cast aluminum turntable, compatible with 33 and 45 rotations, approx. 10 kg
The first stereo power amplifier with audio design to arrive. I immediately played it at the storefront, and it expressed a very clear and realistic sound image. In particular, mid-high range vocals and pianos are vivid and powerful amplifiers. There is a small line scratch on the top plate on the exterior (Sasaki Shota)
Maintenance information: 2024.5.12 operation confirmed
Accessories: manual, power cable
Main specifications: 100W+100W (RCA, 8Ω) 270W+270W (XLR, 8Ω) W260 × H290 × D360 mm 18 kg
The price has been drastically reduced. 2024/5/12 sales price 238,000 yen Accuphase power conditioner. PS-500 upgraded model. The sense of transparency increases, and the way stillness and motion are drawn is more delicate. It is recommended for those who are thinking about upgrading the power supply area. There are dents and stroke marks on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output capacity 510V (continuous) rated output voltage AC100V±2V rated output current 5.1A output frequency 50/60 Hz (synchronized with input frequency) instantaneous current supply capacity 70A input voltage range AC90 to 110V power consumption at no load 55 W 475 W x 180 H x 394 Dmm 23.8 kg
The price has been drastically reduced. 2024/5/12 reprint model of the famous MINIMA with a sales price of 298,000 yen. The unique expanse and colorful sound transcends the boundaries of compact speakers. If you set it slightly away from the wall, a deep sound field space will be drawn. The beautiful wood grain and good texture are also attractive. There are small scratches on the side etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, cover
Main specifications: 2-way speaker bass reflex type frequency characteristics 55 Hz to 25 kHz impedance 8 ohms output sound pressure level 84 dB W200 x H330 x D275 mm weight 6.9 kg
The price has been reduced. 2024/5/12 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The bass reflex port is sticky and there is rubbing on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, original box, jumper cable, cloth
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
The disposal price has been reduced (member prices are not applicable). 2024/5/12 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. The exterior has scratches, line wounds, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
Speaker cable, 2.5 m pair, SOS3+ single connection, Y lug specification on both ends, standard model of the company's speaker cable. There is little dramatization, and the sound is light (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, 6N ultra-pure copper and 70 specially twisted hybrid structured conductors with OFC copper, an R resonator is attached as a damping function based on a new concept, and the plug is an original collect chuck. It's a natural, highly transparent sound quality with few habits typical of SAEC. There are scratches around the plug (Kojima Yosuke)
Accessories: none
Phono cable 1.2 m 5 pin DIN-RCA terminal core wire 0.08 x 40 TW series phono cable sold in the 90s. It is positioned as a basic model among the company's cables and has a light sound with good sound loss. There are abrasions around the plug (Kojima Yosuke)
Accessories: none
Phono cable, 1.3 m, 5P-RCA specification, PCOCC conductor, the standard model of an easy phono cable, since it is a PCOCC conductor, the resolution is excellent. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
RCA cable, 1.2 m pair, silver coated copper wire, turn shield structure, Teflon insulator, is a high density and highly expressive cable with high sound quality (Kojima Yosuke)
Accessories: none