Disposal prices have been reduced. Member discounts are not applicable. 2021/4/10 sales price 2,000 yen. Remote cable 2.0m A remote cable that can synchronize the power switch between the company's control amplifier 035 and the power amplifier 036. It is connected from DC-OUT of 035 to DC-IN of 036 and works in conjunction with 035 operation. (Kondo Hirotsugu)
Maintenance information: 2021.4.4 Linkage confirmed by the company 035 and 036
Accessories: none
※The continuity of the 5.0 m line cable has been confirmed for only 1 line cable. The exterior is beautiful with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: none
※Only 1 is an unopened item, the line cable is 5.0 m unopened and has not been checked, but this is the current situation (Kobayashi Hitoshi)
Accessories: original bag
Parallel cable 1.4 m pair end RCA plug cable that distributes 2 RCA L and R If you've been looking for one, go ahead. In addition to the exterior and writing on the plug, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The 0.5m digital RCA cable terminal is a high quality coaxial cable compatible with REAN (NEUTRIK) HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Digital RCA Cable 1.0m is a high quality coaxial cable compatible with HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Digital cable, 1.0 m, 110 ohm, AES/EBU standard, a combination of reliable Belden and Neutrik. The high cost performance is outstanding. (FUJISAWA KOSHI)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: No accessories
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 6,500 yen. Internal Wiring Cable 2.0m Alpha Internal Wiring Cable It is a single-ply and popular black enamel (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
This is a high quality line cord that takes advantage of the characteristics of 4266, a 1.0m pair of RCA cables with a four-core shield structure (Tamura Eiji)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Oxygen-free copper (OFC) is used as the untreated conductor at the 6.0 m end of the speaker cable, and the 4-core structure reduces radiation noise. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/11 sales price 6,500 yen RCA cable 1.0 m pair 6N+5N hybrid 2-core (twin) W shield. It consists of 4 types of high purity (PC-OCC+ pure silver coated OFC). The range is wide and the sound quality is well-balanced. In addition to being dull on the exterior, there is a feeling of use, such as having a habit (Hiroki Aso)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
Balance cable 1.0m pair stress-free 6N conductors Sound quality that is thicker than AcroLink and has a natural texture that shines with good balance. It is a character that is compatible with a wide range of devices. In addition to cracks in the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
The price has been reduced! 2023/4/30 sales price 10,000 yen, balance cable, only 1.0m, uses technology introduced in the 7N-A2070, uses stress-free 6N copper conductors, and thick rhodymium plated plugs. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke)
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable, 1.9 m pair, sold out type, untreated ends, Acrolink 6N series, which is natural and has no habit. At first glance, it's no different from the S1000/2, but the sheath diameter is one size larger and the conductor is extremely thick. The sense of transparency, moderate sound pressure, and a flat yet firm, thick sound are attractive. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
Only 1 speaker cable uses a new conductor by hybridizing 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
The 1.19m pair end of the speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCu. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end of the 1.35 m end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Phono cable 1.2m 5pin-RCA high-purity 6NCU hybrid core wire 7-layer double 2-core shield structure, high quality cable that strongly shuts out induced noise. Comparing various cables as a standard for phono cables is also fun. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: original box
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
The 2.1 m pair end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior is dirty and dull, and you can see the feeling of use such as magic writing (Tamai Jun)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
※1 bottle only. Speaker cable 2.0m is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/12 sales price 500 yen D terminal cable 1.0m titanium-containing sheath suppresses vibration and achieves high image quality. The exterior has a light feeling of use (Tomonori Asae)
Maintenance information: 2023.10.12 continuity confirmed
Accessories: original box
Digital cable 1.0m round optical mini plug (optical digital voice) → square optical plug (optical digital voice) You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box
Speaker cable with 1.7 m pair ends using unprocessed OFC. This cable is simple and easy to handle. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance Information: 2023.9.5 Conductivity Confirmed
Accessories: none
Phono cable, 1.3 m, 5P-RCA specification, PCOCC conductor, the standard model of an easy phono cable, since it is a PCOCC conductor, the resolution is excellent. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, PCOCC conductor, it is a clear, well-contoured sound typical of Audio-Technica. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
RCA cable uses 1.5 m pair of out-of-print conductors and single crystalline high-purity oxygen-free copper PCOCCC with theoretically zero crystal boundaries for all core wires, braided wires, and plug pins. The shield is rolled up on the plug attachment part, it is dull, and there is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.3 continuity confirmed
Speaker cable This is an audio-technica home theater speaker cable with an unprocessed 3.0 m end. It's only for home theaters, so it's good to tune the sound field and sense of realism (Kobayashi Hitoshi)
Maintenance information: 2024.3.9 continuity confirmed
Accessories: none
Speaker cable is a basic type of high-purity OFC cable with unprocessed 1.3 m pair ends that are easy to use, and the conductor is a basic type of high-purity OFC cable made by stringing 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none