Woofer edge softening treatment! A mid-size dia-tone speaker. The sound image expressed from precise sound construction is carefully created with diamond tones, making classical music elegant and magnificent. Female vocals etc. are also recommended. There are small scratches, scuffs, and broken corners on the net. Serial 19119, 19433 (Fujisawa Yukishi)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed frequency band, 35 Hz to 40 kHz, 6 ohms, sound pressure level, 90 dB, W360 x H808 x D325 mm, 29 kg/book
It is a 75 ohm coaxial cable with 0.7 m RCA terminals and a double shielded “cordel structure” that minimizes dielectric loss. The exterior is dull, part 1 characters are missing, etc. (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
A fully balanced discrete, non-feedback D/A converter using an independent mono mode that is also equipped with a NOS mode. Equipped with 2 ESS ES9038PRO In addition to being compatible with the latest high-resolution sound sources in various PCM and DSD formats via USB input, it also supports coaxial digital input (2 systems) AES/EBU input. You can enjoy more realistic and natural sounds in NOS mode. There are several dot-shaped dents on the front panel. Serial 190730008 (Fujisawa Yukishi)
Maintenance information: 2024.5.20 Operation confirmed (the mounting solder was fixed because the RCA terminal ground cap came off.)
Accessories: instruction manual, power cord, spike
Main specifications: input format (USB) PCM, DSD (DoP v1.1, ASIO) input format (coaxial/AES/EBU) PCM, DSD (DoP v1.1) compatible sampling frequency (USB) maximum 768 kHz (PCM) /maximum 22.6 MHz (DSD) compatible sampling frequency (coaxial/AES/EBU) maximum 192 kHz (PCM) /2.8 MHz (DSD64 DoP v1.1) PCM quantization Number of bits (USB) 24 bit 32 bit PCM number of quantized bits (coaxial/AES/EBU) 16 bit 24 bit USB profile USB 2.0, USB Audio 2.0 digital input USB (Type B) 2 coaxial (SPDIF) AES/EBU analog output XLR1 system RCA1 system analog output level (XLR) 5.6 Vrms analog output level (RCA) 2.8 Vrms frequency characteristics 2 Hz to 120 kHz (+0/-1 dB) S/N ratio 110 dB total harmonic distortion ratio 0.003% analog filter secondary passive power supply voltage AC 100V 50/60 Hz power consumption 40W size W430 x H109 x D379 mm weight 10 kg
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, transport lock pin
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Accuphase F-5/F-15 crossover frequency 12500 Hz board. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: crossover frequency 12500 Hz attenuation characteristics 12 dB/oct・-18 dB/oct switchable
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
Crossover 5000 Hz board. Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Uses a 0.5 m pair PCOCC RCA cable. You can see a feeling of use on the exterior, dullness, dirt, threads, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Continuity confirmed
Accessories: none
This is an orthodox cable for 6.0m pair entry for speaker cables. The wire is soft and easy to handle. The exterior is dirty, dull, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
Non-switching Class A configuration mono power amplifier. It goes great with British speakers, and the fresh, rich, and powerful sound is appealing. It also has a built-in music sensing function that automatically goes into standby state (green) when the input signal is interrupted for a certain period of time, and turns on the power (red) when the signal comes back in. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cord, original box
Main specifications: 100W+100W 8Ω W160×H100×D350mm 5.0 kg
Phono cable is a 1.2m RCA-RCA terminal line cable with a phono ground pin. There is a feeling of use on the exterior, threads on the shield, dullness of the plug, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Continuity confirmed
Accessories: none
500Hz/2 way board included. Accuphase 2-way/3-way channel divider. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cable, CB500, CB-2WAY
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. An easy-to-use tuner equipped with 20-station random memory and an auto tuning function. The sound is clear and easy to hear. *TV broadcasting is compatible, but TV reception is not possible because it is a model prior to digital terrestrial broadcasting. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440×H78×D331 mm 4.1 kg
*Currently sold. There is poor contact with the balance, and there is a sound leak in the shaken part, which is the current situation. First generation of the best-selling 390 series. The compact body is equipped with a large toroidal transformer, and the sound quality is well-balanced and has a firm core at an affordable price. Recommended for those starting out with audio or those looking for a sub unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmation (input/output possible, BAL contact is faulty)
Accessories: instruction manual
Main specifications: 60W+60W speaker output 2 systems line input 5 systems with PHONO (MM/MC) W434 x H120 x D279 mm 5.8 kg
A FOSTEX HA21 throat adapter is set on a self-made horn that is a size imitation of the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
A power amplifier with a dual monaural configuration. This model has a small output yet has driving power, and since the signal path has been shortened, it makes you feel more powerful than the specs. You can fully enjoy the sound, intensity, and thickness unique to Levinson at an affordable price. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1520 (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 50W+50W (8Ω) 100W+100W (4Ω) 200W (8Ω MONO) input sensitivity/impedance 1V/50kΩ (balanced/unbalanced) W483 × H175 × D370 mm 19 kg
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
An ultra-high purity 6nCu with a digital RCA cable 1.0m pure silver coating is used as a single wire. Double shield structure with soft copper wire braids layered on top of aluminum PET tape. A two-layer sheath structure that controls unnecessary vibrations by covering the outer circumference of the shield with a RoHS-compatible PVC sheath. The exterior is generally beautiful with no conspicuous scratches (Tamai Jun)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
Balance cable, 1.0 m pair, solid PSC+ copper conductor, cable with a large sound field and excellent sense of sound separation. It is an extremely cost-effective model among the company's line cables. There is an abrasion on the plug (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
This is an entry model that uses a 1.0 m pair of RCA cables with a symmetrical coax structure. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
※One screw lid on the top plate is missing. ADK 3-tier rack It is a system upgrade type natural wood audio rack that allows units to be stacked one after another as the number of devices increases. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W574 x H635 x D500 mm first stage space H250 mm second stage space H230 mm weight 26.7 kg
RCA cable 2.0m pair LC-OFC Class 1 is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is impressive with flat, tight bass and smooth high-frequency luster. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
Comes with original box! The 1.0 m digital coaxial cable has a 2.5% silver coating and is a mid-range model that balances every element at a high level. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
The price has been reduced. 2024/5/18 sales price 130,000 yen A Sony ES class stereo integrated amplifier aimed at high quality music playback. We are particular about high-resolution playback, and are reviewing basics such as high-capacity power supplies and high-rigidity symmetrical chassis. Also, there is impedance switching for headphone users, making it convenient as a high-end headphone amplifier. The sound quality is clear and clear. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: audio input RCA x 4, XLR x 1 (No. 2 HOT) practical maximum output 120+120W rated output 80+80W, speaker compatible impedance 4 to 16 ohms, W430 x H130 x D420 mm, 17 kg
It is a model that has completely renewed all units in the JBL 4312 series control monitor, which has continued for over 30 years. In addition to the vibrant sound with a high sense of freshness, which is characteristic of the series, the expansion of the high frequency range is remarkable. The exterior has a feeling of use such as dullness. Serial 0261 0440 (Tomonori Asae)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3-way bookshelf type frequency characteristics 40Hz to 40kHz crossover 2kHz/5kHz 6Ω output sound pressure level 93 dB W362 x H597 x D301 mm 18.1 kg
The price has been reduced! 2023/5/10 sales price 18,000 yen Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Asae Tomoho)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
This is a phono equalizer amplifier using FET. Excluding local feedback, the overall CR type circuit configuration is compatible, and MM/MC switching is handled by first-stage FET gain switching. The sound is neutral and unobtrusive. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cable
Main Specifications: Input Terminal Unbalance (RCA) 1 System Output Terminal Unbalance (RCA) 1 System mm3mV MC0.25mV W102 x H112 x D209 mm 1.0 kg
Pioneer ceramic straight arms. This is a genuine arm for the company's record player, and is also compatible with PL-70L2 and P3a (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: straight arm pipe compatible player PL-7L PL-70L2 P3a, etc.
※The dust cover is missing. Maintained! Sony's first fully automatic player. Equipped with a biotracer that electronically controls all complex movements of the tone arm. An ambitious Japanese work packed with every gadget imaginable at the time! Needle pressure can be adjusted simply by controlling the knob on the front panel, and the applied needle pressure value is digitally displayed. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.27 Maintained (main unit internal inspection grease coating, cleaning) *At low temperatures, an offset will occur when the arm is forcibly fed by manual operation. The current situation is that stable operation is not possible unless the room temperature or the temperature inside the main unit rises to a certain extent (room temperature).
Accessories: none
Main specifications: Crystal Rock D.D. Fully automatic player system, needle pressure adjustment range 0.5 g to 3.0 g, W500 x H175 x D430 mm, approx. 15 kg
MC cartridge compatible with EMT arms by attaching the SPU body and Audiocraft adapter OF-3A to the modified headshell. You can enjoy the gorgeous and expansive sound typical of an orthophone with the EMT arm. The cantilever is moving very slightly to the right (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: MC type output 0.2 mV for EMT arms, proper needle pressure 4 g, internal impedance 2 ohms, dead weight 24 g
The price has been drastically reduced! 2023/5/16 sales price 118,000 yen with LS STAND 70 (list price 48,000 yen). This model won the Audio Famous Equipment Award 2005 Speaker System Small Category Award. An excellent balance between the robustness of the enclosure and the suppleness of the unit group. A practical model with attractive spatial expressiveness and accurate sound images that don't make you aware of the presence of a speaker. There are scratches and bumps on the exterior. Serial 37038E002557/37038E002558 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: instruction manual saran net spike fixing screw
Main specifications: 2-way bass reflex woofer 115mm aluminum hybrid cone tweeter JETIII crossover frequency 3,000 Hz input rating 70W/maximum 90W frequency characteristics 42-50,000 Hz efficiency 86dB impedance 4Ω dimensions W123 x H208 x D282 mm (when grille attached) weight 6.5 kg LS STAND 70: H700 x W240 x D290 mm top plate W75 × D210mm weight 6kg/set
The price has been reduced. 2024/5/19 sales price 148,000 yen A typical woofer attached to first-class products such as Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. There is a light stain on the corn paper (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1
The price has been drastically reduced! 2024/5/13 sales price 108,000 yen Speaker from Taiwanese manufacturer Usher Audio with a unique design. The mid to high frequencies are delicate and stretchy, and the low frequencies have an attractive, bouncy, and tense sound. It is a model that works very well with current pop and piano sounds when played clearly with a powerful amplifier. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.5.13 operation confirmed
Accessories: Saran net spike spike receiving jumper plate
Main specifications: 3-way 3-speaker bi-wire specification 8Ω 87dB 25Hz to 28,000 Hz W350 x H1250 x D650 mm 58.2 kg
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
The price has been reduced! 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with upper and lower 20cm woofers. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
The price has been reduced! 2024/5/18 sales price 7,000 yen ※There is no problem with operation, but since it is cheap, it is being handed over as is. A speaker that uses a silk OMF diaphragm. The response is fast, and the mid to high range sound is produced well. The impression is that it is suitable for female vocals, jazz pianos, etc., and has a luxurious real wood veneer finish. Serial 5990510607/5990510607 (Tomoho Asaine)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex, 4 ohms, frequency band 45 Hz to 35000 Hz, W180 x H305 x D270 mm, 5.1 kg
The price has been reduced! 2024/5/19 sales price 478,000 yen A digital processor that inherits DP-720 technology. ES9018 manufactured by ESS Technology is operated in parallel. It is especially recommended for Accuphase CD players and transports. The SN is good, the sound has good visibility, and is excellent compatibility with high resolution and PC audio. The exterior is generally beautiful, although there are small scratches on the top plate. Serial A5Y134 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual power cable
Main specifications: digital input HS-Link x 1 coaxial x 2 TOS link x 2 USB x 1 XLR x 1 USB 5.6448 MHz (1 bit 2 ch DSD) 384 kHz (32 bit 2 ch PCM) high resolution compatible dimensions W465 x H114 x D385 mm weight 14.4 kg
The price has been drastically reduced! 2024/4/25 sales price 69,800 yen ※Currently sold. This is an AUDIO PHYSIC superwoofer. You can enjoy very powerful bass. The crossover can also be switched between 32/46/61/80/105 Hz, which is convenient. As for the exterior, there are line scratches, saran net holes, dull stains, etc. on the top plate. Serial 573 (Yonejima Satoshi)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: spikes, saran net
Main specifications: W260 x H625 x D400 mm 26 kg
*Currently sold. Technics 5cm horn tweeter Uses titanium diaphragms and die-cast aluminum horns. The sound quality is bright and hard with good sharpness. There are scratches and oxidation on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.19 oscillator test is good
Accessories: No accessories
Main specifications: horn type playback frequency 3,000 to 25,000 Hz W70 x H70 x D60 mm 0.35 kg
The price has been reduced! 2024/5/16 sales price 9,800 yen ※Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
The price has been reduced! 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
Maintained! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. The exterior has been beautifully finished due to maintenance (Mizusaki Ryo)
Maintenance information: 2024.5.11 maintained (exterior repair/polishing/oil finish, front and rear baffle/horn repair/painting, saran net replacement/frame repair, woofer edge replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, unit detachment)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
The price has been drastically reduced! 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type