The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
Pair tube, PX4 equivalent tube, direct thermal triode, made in England, measured value 54/52 (rejection value 39) with white box (there is writing on the box) *The pair was judged based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Maintained! Pre-main amplifier with built-in DA converter. An amplifier that allows you to enjoy a gentle, expansive sound like Denon with analog input, and sound quality with a wide range with digital input. This amplifier can also be recommended as an amplifier to be combined with PC audio (Daiki Goto)
Maintenance information: 2024.2.21 maintained (function, recout, digital input, speaker, tape, loudness switch disassembly, polishing grease application, output relay replacement, bus volume replacement, solder repair, various volumes, switch cleaning, interior and exterior inspection and cleaning, digital input/output confirmation, operation confirmation. (*Since the bus volume is similar, the bus lifts slightly when the source is directly off)
Accessories: none
Main specifications: 110W+110W (8Ω) phono (MM/MC switching) 5 digital input systems (coaxial x 3/optical x 2) W434 x H180 x D420 mm 18 kg released in 1989 (Kojima Yosuke)
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The price has been drastically reduced. 2024/2/18 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. Serial AWY15180500756 There are scratches on the top plate on the exterior (Hiura Katsuji)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: remote control power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The price has been reduced. 2024/5/24 sales price 79,800 yen This is a standard professional 1-inch screwdriver model. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Sold 1 bottle, 300B equivalent tube, direct heat triode tube, English tea base, double ring getter, measured value 66 (rejected value 58) with original box ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been reduced! 2024/6/2 sales price 79,800 yen This is a world-standard club mixer model that won the Best Club Mixer award in 2002 and 2003. Equipped with a 4-band EQ, the 4 dual stereo channels can be freely crossfaded, and are compatible with various mix styles and performance styles. High sound quality is also a factor in popularity. It is dull and has a feeling of use. Serial X262120X172629 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 6 x dual stereo input 4 x RIAA (phono) input 2 x microphone input 4 band EQ high quality P&G/VCA fader analog VCF x 2 channel & master/cue peak meter split cue function booth monitor out frequency characteristics 20hzto40kHz+0/-1dB maximum power consumption 30W size W320 x H105 x D358 mm 5 kg
The price has been reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement. Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1 ohm diaphragm scratch) DCR (b/6.3 ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but the location mechanism that allows you to move it to the desired position and play is convenient, so you can easily enjoy analog. There is a feeling of use such as button corrosion and dullness (Daiki Goto)
Maintenance Information: 2024.5.25 Maintained
Accessories: M44G, EP adapter, instruction manual
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained! Although it is a transistor amplifier, it has a warm sound like a vacuum tube with a faint scent. While it is glossy, it is also strong, so you can use it with any speaker. Exterior, dullness, scuff marks, rust, corrosion, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Maintained (main amplifier circuit fault repair fuse replacement. Switch and volume affinity correction)
Accessories: none
Main specifications: 80W+80W (8Ω) W466 x H181 x D378 mm 15 kg
Maintained including pickup replacement (replacement)! A CD player that lets you listen to a glossy, supple sound typical of England. It is the first model in the FMJ series, which continues with the CD36, which aims for a modern approach while retaining the core part of traditional English traditions. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (replacement of products that can be replaced with pickups, mechanical assy cleaning, grease up of various parts) 2024.5.5 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Equipped with a “24 bit ring DAC” jointly developed with DCS, HDCD compatible digital output: coaxial/TOS analog output: RCA2 system W430 x H85 x D290 mm 6.5 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with an upper and lower 20cm woofer. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
The price has been reduced. 2024/4/24 sales price 69,800 yen ※Since the digital input circuit module cannot be repaired, the digital input cannot be used. Maintained! Kenwood pre-main amplifier. It plays clear, transparent mid-high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. There is an air cap mark on the top of the front panel. (KOBAYASHI Hitoshi)
Maintenance information: 2024.4.24 Maintained (input board connector correction, switch correction, contact correction, operation confirmation) 2023.5.21 Maintained (display lamp replacement. Switch and volume contact correction. (*The digital circuit module is broken, but the digital input cannot be used because it is not available)
Accessories: none
Main specifications: 150W+150W (8Ω) phonomC/mm mounted damping factor 1000 W 476 x H170 x D424 mm 19.7 kg
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
The price has been drastically reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner. It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches simultaneously (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
Triode line exclusive vacuum tube premain developed with the novel concept of an amplifier for women. With its compact, exquisite size and high design, it can be used in a variety of situations. The exterior is good with only a small scratch and there is little feeling of use. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cable
Main specifications: output 3W+3W (8Ω) vacuum tubes 6BQ5 x 2, 12ax7 x 2, dimensions W190 x D180 x H135 mm weight 4.7 kg
Maintained! Even though it was an entry-class CD player at the time, I felt that it was well-made. You can enjoy clear, tight low range and high frequency sound with good visibility. Many abrasions can be seen on the exterior and sides, and there are also small scratches, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.10.30 Maintenance completed (servo mechanical disassembly, rail, pickup oilless metal rust removal polishing. Tray drive belt replacement. Optical lens cleaning (Output VR cleaning)
Accessories: remote control, copy of instruction manual
Main specifications: center mechanical mount system D/A conversion method advanced H.D.L.C advanced pulse D/A converter score digital filter W430 x H125 x D375 mm 12 kg
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
The price has been reduced! 2024/3/4 sales price 59,800 yen ※The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. Scratch marks and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
8000 Hz network for high range It can also be used in combination with JBL 077 or when combining a full range with a tweeter. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal terminal deterioration replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 8000 Hz check OK)
Accessories: none
Key Specifications: 2 Way Variable Level Control Crossover Frequency 8kHz 8Ω Weight 0.9 kg
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained. With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 7000 Hz check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (The mechanical fixing parts were manufactured and replaced in 1 pair. The clamper and loading belt have been replaced. The velocity coil has been repaired and corrected. (The tact switch on the operation panel has been replaced)
Accessories: remote control
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The price has been reduced. 2024/5/9 sales price 49,800 yen Woofer edge softening treatment! A classic model that uses carbon graphite on woofer cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Pair tube, English tea base, double gettering code: 8047/8048 measured value 56/54 (rejected value 32) with original box*Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintained. An impressive pre-main with a glossy, elegant sound. The advantage of being equipped with MOS-FET is that visibility is good, and the good balance without feeling a sense of loss in sound is attractive. It is a model that can be enjoyed regardless of genre. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (speaker relay replacement, push SW replacement due to sound interruption when switching MUTING switches, replacement volume with replacement volume for sound output, other INPUT selector electric SW, Cartrich LOADSW, speaker rotation switch, direct INPUT switch, polishing and cleaning grease application for each disassembly contact, DC balance DC bias adjustment, due to large internal dirt (Since it is a VR replacement for cleaning and volume, the volume cannot be changed with the remote control since it is not electric)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) W470 × H165 × D435 mm 21.3 kg
The price has been reduced! 2024/5/17 sales price 49,800 yen Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches and line scratches. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
I cut the price. 2021/8/30 selling price 49,800 yen rare! Decka's Gramophone Rally is Hi-fidou's first arrival. The turntable is smaller than the board, and the sound has a sense of scale in the UK with a compact body. The atmospheric design, retractable needle case and spring handle are very attractive. Unknown details (Yoichi Murakoshi)
Maintenance information: 2021.8.30 sound confirmed
Accessories: replacement needle
Main specifications: W155 × H280 (350 with the lid open) × D375mm 5.5kg
The price has been drastically reduced. 2021.6.23 sales price 49,800 yen ※Conductivity has been confirmed, but since the terminal has not been treated and the ground wire is broken, it is currently sold. Exclusive tone arm for DECCA MARK 1/2/3 cartridges. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal state for the head of the company (Murakoshi Yoichi)
Maintenance Information: 2021.6.13 Continuity Confirmed
Accessories: armrest
Main specifications: static balance type, total length 303 mm, execution length 225 mm
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
Pair tube 45Special compatible spherical triode fishing rod filament measurement value 94/86 (rejection value 55) *Pairs are judged based on GM values measured by test machine TV-7 (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2022/12/18 sales price 79,800 yen Columbia desktop gramophone Viva-tonal Grafonola. You can adjust the volume with the front fins. The sound box is equipped with No. 9. The exterior is in good condition, although there are some scratches and stains due to age, I think it is good considering the age (Kanai Hidetsugu)
Maintenance information: 2022.12.11 sound output confirmed
Accessories: none
Main specifications: Dimensions W490 (including handle) x H320 x D483 mm, weight 14 kg