※It is inexpensive because there are many scratches and there are no second-tier metal fittings at all. The horizontal rack can be used for a wide range of purposes, such as for AV on televisions, etc., and for audio. Compatible with a total load capacity of up to 300 kg. There is a feeling of use such as scratches. ※Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: load capacity: top plate 150 kg or less, shelf board 50 kg or less, bottom plate 50 kg or less W1,165 x H492 x D580 mm weight 62 kg
Oyaide record stabilizer. The vibration mode is optimized with a hybrid configuration of aluminum, brass, and texalum. Unnecessary vibrations associated with platter rotation are attenuated, and sound groove tracing is dramatically improved. It can also be used as an EP stabilizer by reversing it up and down (Daiki Goto)
Accessories: original box, instruction manual
Main specifications: 200g (no weight) to 440g (full weight attached) *Weight can be changed in 40g increments, diameter 70mm, H35mm
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
*This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior and scratches on the back (Mizusaki Ryo)
Accessories: none
Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
Based on the CS-1000, it is a model that promotes high sound quality and weight reduction. The duralumin machined body and Diamond Like Carbon treatment achieve both a sense of luxury and rigidity (Daiki Goto)
Maintenance information: 2024.6.5 continuity confirmed
Accessories: original box, instruction manual, screws
Main specifications: dead weight 13.7 g
SAEC ceramic shell A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. There is a cloudy part (Daiki Goto)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
The price has been drastically reduced. 2024/6/4 sales price 780,000 yen A high-performance speaker that condenses the sound production of the multi-cabinet SYSTEM7 into a single cabinet. The balance between dynamism, wide range, and sense of sound localization is excellent. Another advantage is that it creates a sound that is less likely to be affected by the performance of the amplifier. There is a partial tear in the corner of the saran net, and there is a linear paint crack separating the top and bottom on the right side of one (Sasaki Shota)
Maintenance information: 2024.6.3 sweep test is good
Accessories: manual, spike, spike holder, cover
Main specifications: 3-way 4Ω frequency characteristics 29Hz to 22.5kHz 89dB W320 × H1040 × D460 mm 73 kg
The price has been drastically reduced. 2024/6/4 sales price 1,380,000 yen The piano black is a majestic B&W802 diamond. It is a high-end machine that boasts a clear and transparent high range unique to diamond tweeters, and a medium to low range that is ideal for home environments, achieving both tightness and a sense of volume. There are about 3 thin line wounds on the side (Kojima Yosuke)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, saran net, jumpers, casters, spikes, casters (currently attached), transport locks, special wrenches
Main specifications: 3-way bass reflex type 25mm diamond dome tweeter 150mm warven kevlar 200mm loha selcone woofer playback frequency band 27Hz to 33kHz sensitivity 90dB impedance 8Ω crossover frequency 350Hz 4kHz size W368 x H1,135 x D563 mm weight 72 kg/bottle
The price has been reduced! 2024/6/4 sales price 79,800 yen The Silver series is used in woofers that use the new DCF technology. The unit, which has the familiar high-speed texture, is stored in a relatively large enclosure. The low range, which has more volume than the size, and the clear mid to high range are attractive. The exterior has a feeling of use such as dullness. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: jumper cable (general purpose)
Main specifications: 2-way bus reflex type frequency characteristics 40 Hz to 35,000 Hz, crossover frequency 2,800 Hz, efficiency 88 dB, impedance 8 ohms, W230 x H375 x D329 mm, weight 9.3 kg/unit
The price has been reduced! 2024/6/2 sales price 118,000 yen ROYAL AUDIO TSB-9 with dedicated stand! A popular Pioneer ribbon tweeter. A golden combination of beryllium diaphragms and alnico magnets. In addition to the ultra-high frequency sound quality correction, the expansion of spatial expression, and the wide sound field can be clearly experienced with classical sources. The exterior is dull, and there are scratches on the front mesh and pedestal (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: dedicated stand
Main specifications: input impedance 8 ohms, playback frequency band, 5,000 Hz to 120,000 Hz, maximum input, 100 W, output sound pressure level, 97.5 dB, crossover frequency of 5,000 Hz or more, W134 x H89 x D179 mm, 2.6 kg
It is a grace shell characterized by a fin shape. Lightweight yet hard, highly rigid shell (Asaine Tomoho)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber dead weight 10.7g
High output type. You can easily enjoy the delicate sound of MC cartridges without a step-up transformer. The thick mid-range, and the instantaneous, and light sound is attractive. Serial 4875 (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box
Main specifications: high output MC type, output voltage 1.6 mV, needle pressure 1.5 to 2.1 g, playback frequency band 20 to 45,000 Hz, load resistance 47 kΩ or more, internal impedance 160 Ω, needle tip 0.1 x 0.2 mm square solid, special elliptical needle, dead weight 4.8 g
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
Maintained! This is a very well made 300B single amp. The outstanding sharpness and power, and sweet and gorgeous sound are unbearable. The JJ 300B is used as the output tube. It is a combination of the popular transformer TAMURA F-2007 pair, PC-3004, and A-4003. The first stage uses 12AT7, and the rectifier tube uses 5AR4. It comes with a volume and can be connected directly to a CD. There is a ham balancer inside (Yasuhito Koshihama)
Maintenance information: 2024.6.5 maintained (AC cord missing added; wiring changed to output impedance 4Ω → 8Ω; main volume 100K B curve → 2 replacement; vacuum tube 12AT7 deterioration replacement; RCA jack and vacuum tube socket caulking repair. Operation checked with AC 100V (measured with rated output 10W+10W SP8Ω)
Accessories: power cable
Main specifications: output 10W+10W (actual measurement) W434 × H217 × D333 mm 18.9 Kg (actual measurement)
Maintained, with remote control! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. There are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.4 Maintained (Electrolytic capacitors were replaced due to faulty capacitors in the power supply unit and motor unit)
Accessories: power supply unit, remote control, copy of instruction manual
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji)
Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good)
Accessories: phono cable, instruction manual
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
The disposal price has been reduced. Member prices are not applicable. 2024/5/30 sales price 398,000 yen ※It is cheap because there are many scratches. Maintained by Taiyo International. This time it comes with a special battery BPS-2. Geoff Roland's peak stereo power amplifier. Genuine Oba Shoji product. A thorough non-resonance design using the company's traditional hard aluminum material. The high range with a sense of transparency and sharpness, the mid and low range with a sense of speed and driving power, and a vivid and satisfying sound are attractive. The exterior has scratches, line scratches, and dirt marks (Ryo Mizusaki)
Maintenance information: 2024.5.2 manufacturer maintained (BPS-2: internal cleaning, battery replacement, inspection of various parts, operation inspection. (Model2: Inspection of each part, characteristic inspection, running test)
Accessories: power cord, connection cable
Main specifications: 75W+75W (8Ω) GAIN26/32dB with changeover switch, input impedance with HIGH/LOW changeover switch, input impedance switching W445 × H133 × D362mm 21kg BPS-2: W445 × H133 × D362 mm weight 22 kg
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
The price has been reduced. 2024/6/4 sales price 398,000 yen*Inexpensive because there are noticeable scratches on the front. Player system with SME3010R mounted on Luxman PD-171AL! Popular MC cartridge SPUs can also be attached. The combination of the latest high-end machines and high-end arms makes it a player that excels in the amount of information with Japanese precision and a reliable skeleton. It is one that brings out the characteristics of cartridges to the greatest extent with precise sound (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: power cable, instruction manual
Main specifications: [PD-171AL] belt drive AC synchronous motor quartz lock oscillator amplifier turntable · machined aluminum surface finish · diamond cut weight 5.0 kg rotation speed 33 · 45 rpm W492 ✕ H140 ✕ D407 mm weight 23.8 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
For the first time in about 8 years, Mysonic Labs ultra-low impedance mono MC cartridges have arrived! It is a cartridge designed to extract as much information as possible from mono LPs. Even though it's clear, you can feel the richness of the relaxed sound, and it makes me reaffirm the goodness of mono LPs. Serial A577 (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual, original box, needle cover, brush
Main specifications: Ultra low impedance MC cartridge frequency range 10 Hz to 50 kHz output voltage 0.4 mV impedance 1.2 Ω needle pressure 3 g
A rare FR dynamic balance type long arm, which has not arrived in a long time, has arrived! Dynamically balanced Roman arms. It uses a central mass concentration structure and a differential damping mechanism to produce precise and accurate sound. *Phono cable is missing. Serial 161934 (Tamura Eiji)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: original box, instruction manual
Main specifications: Long arm dynamic balance needle pressure range 0 to 3 g total length 379 mm effective length 307 mm overhang 12 mm compatible cartridge 17 to 32 g arm height 36 to 72 mm
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
The 1.2m pair of unprocessed speaker cable has excellent balance from low to high frequencies, and has an energetic and warm tone. There are threads and disappearing characters on the exterior (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: No accessories
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
※There is no problem with operation, but since it has an air freshener smell, it is inexpensive and is currently sold. A speaker developed in collaboration with European sound designers. It is compact, has good sound, and the soft, gentle treble characteristic of soft dome tweeters is attractive. A model with a wooden cabinet with a calm design that is excellent for space harmony. There are no major scratches that are particularly noticeable on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: jumper cable
Main specifications: 2 way 2 speakers bass reflex type anti-magnetic design (JEITA) 13 cm cone type carbon fiber woofer 2.5 cm/ soft dome type tweeter impedance 6 Ω output sound pressure level 86 dB dimensions W182xH296xD293 mm weight 8.7 kg/1
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
The disposal price has been reduced (member prices are not applicable). 2024/5/14 sales price 158,000 yen The top plate has line damage, so it's cheap. Genuine Rin Japan. A famous player that brought network audio to the world at a high level. Equipped with the same functions as the KLIMAX DS, such as balanced output. The density of sound and the rich amount of information are attractive. The remote control is LINN's general-purpose type (Oikawa Tetsuji)
Maintenance information: 2024.5.14 operation confirmed (PCM/playback up to 192 kHz OK)
Accessories: power cable, universal remote control
Main specifications: support files FLAC, WAV, AIFF, AAC, MP3, WMA W381 x D360 x H80 mm 4.0 kg
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g