The price has been reduced! 2024/5/11 sales price 178,000 yen Maintained! A best-selling control amplifier using C-280 circuit technology based on the C-200X. You can enjoy tight low frequencies, sharp mid to high frequencies, and sharp sound. The sound image is tighter than the current Accuphase, and the straight sound is also attractive. There are exterior, dullness, and small scratches (Yonejima Satoshi)
Maintenance information: 2024.5.11 Maintained (tone switch, output switch disassembly contact cleaning contact grease application, push switch disassembly contact cleaning grease application, other switches, volume contact cleaning. Electrolytic capacitor replacement. Offset voltage regulation. (Check the operation of each input/output)
Accessories: instruction manual
Main specifications: PHONO input x 3 systems (MC, MM compatible) TAPE x 3 systems PRE OUT x 2 systems W445 x H160 x D373 mm 13.6 kg
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
Accuphase's pure A class stereo flagship model. The balance between static and dynamic, and soft and stiff is packed into this car. A power MOS FET with a reputation for sound quality and reliability is used as the output element, and 10 parallel push-pull drives are used per channel. Furthermore, the powerful power supply unit achieves linear high power up to an ultra-low impedance of 1 ohm. There are scratches on the exterior. Serial D1Y563 (Fujisawa Yukishi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, power cable (general purpose)
Main specifications: 60 W+60 W (when 8 ohm stereo specification) 240 W (when 8 ohm mono specification/bridge connection) gain 28 dB load impedance 2 to 16 ohms (in stereo specification) 4 to 16 ohms (in mono specification/bridge connection) W465 x H238 x D515 mm weight 43 kg
Accuphase's pure A class stereo flagship model. The balance between static and dynamic, and soft and stiff is packed into this car. A power MOS FET with a reputation for sound quality and reliability is used as the output element, and 10 parallel push-pull drives are used per channel. Furthermore, the powerful power supply unit achieves linear high power up to an ultra-low impedance of 1 ohm. The exterior has some impact scratches on the corner. Serial D1Y562 (Fujisawa Yukishi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, power cable (general purpose)
Main specifications: 60 W+60 W (when 8 ohm stereo specification) 240 W (when 8 ohm mono specification/bridge connection) gain 28 dB load impedance 2 to 16 ohms (in stereo specification) 4 to 16 ohms (in mono specification/bridge connection) W465 x H238 x D515 mm weight 43 kg
Accuphase's dedicated analog disc input board. Using the latest circuitry and selected high-quality sound materials, extremely low noise and high-accuracy RIAA deviations have been achieved. The optimal impedance can be selected from 30/100/300 ohms during MC. It is also equipped with a subsonic filter, so you can enjoy an even higher grade analog sound than the AD-30 (Kojima Yosuke)
Accessories: instruction manual, original box
Main specifications: [MM] gain 40dB, input impedance 47kΩ [MC] gain 66dB, input impedance 30/100/300Ω switching [compatible models] C-2000, C-2110, C-2120, C-245, C-265, CX-260, E-211, E-212, E-213, E-250, E-260, E-270, E-306V, E-307, E-308, E-350, E-360, E-370, E-406 ・E-407 ・E-408 ・E-450 ・E-460 ・E-470 ・E-530 ・E-550 ・E-560 ・E-600 ・E-650
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
The price has been drastically reduced. 2024/5/24 sales price 248,000 yen Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
The price has been drastically reduced. 2024/3/18 sales price 79,800 yen ALTEC's royal unit used in A7 etc. It's a woofer with a good sense of clarity and a light sound. It has a sense of dynamism and goes well with jazz and rock (Shota Sasaki)
Maintenance information: 2024.3.18 sweep test good
Accessories: none
Main specifications: 38cm ferrite magnetic woofer, 97db, 8Ω, 20Hz to 1600Hz, weight 9.4 kg, baffle opening diameter 35.9 cm
※It is inexpensive because it is in poor condition such as being hit or the saran net peeling. It is tightly packed with a strong sealed enclosure and a high-quality unit, and the sound is moist and calm. If you drive with an amplifier with a strong drive, you can enjoy the dense mid and low frequencies. The exterior has scratches, scratches, and creases. Serial 02093/02092 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: impedance 8Ω output sound pressure level 85dB W220 × H390 × D255 mm 15 kg
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
A single-by-wire rocket series entry model with a 3.0 m pair of banana plugs at the end of the speaker cable. Divided into 4 conductor paths, the sound quality is more dynamic with a structure that suppresses malignant interactions that occur between the 2 conductors. Also, although it is composed of a semi-single-wire conductor arrangement, it has a highly flexible cable structure. There are abrasions etc. on the sheath (Kojima Yosuke)
Accessories: original box