Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
※Shipping service. Special Issue No. 134 = Sound System Design in the Super CD & Multi-channel Audio Era, Immortal Analog/Power Basic Course, Detailed Report by Claire MRS (with test tables for each company's subwoofers) /Revell Audio Visit Diary, published on 2000.7.15. Since the photograph is a sample, the actual item may be broken or have markings etc.
※1 bottle only. A vertical stand dedicated to the company's 33WER/33WER-S. If you've been looking for one, don't miss this opportunity. (YONEJIMA Satoshi)
Accessories: instruction manual, original box
Main specifications: actual measurement approx. W202 x H65 x D202 mm weight 950 g/unit
※Shipping service. Special Feature: Black Trivia Encyclopedia/My Reggae Life ~ Watanabe Sadao Accompanying My Dear Life's Recorded Trip/ Reviving the Precious Heritage of Jazz Giants/The Contrasting Appeals of Sam Cooke and James Brown/ etc. S58.2.20 issued.
Disposal prices have been reduced. Member discounts are not applicable. 2021/4/10 sales price 2,000 yen. Remote cable 2.0m A remote cable that can synchronize the power switch between the company's control amplifier 035 and the power amplifier 036. It is connected from DC-OUT of 035 to DC-IN of 036 and works in conjunction with 035 operation. (Kondo Hirotsugu)
Maintenance information: 2021.4.4 Linkage confirmed by the company 035 and 036
Accessories: none
Disposal prices have been reduced. The 2020/2/10 sales price is 3,000 yen. ※It is inexpensive because it is in poor condition. Ceiling hanging bracket for the company's speaker 301 MM/2. It can be adjusted up and down by ± 90 degrees, and can be rotated 360 degrees horizontally. The feeling of use, rust, dullness over time, and stains are severe, and there are places with rust. (WATANABE Tadashi)
Accessories: none
Main specifications: W248 x D150 x H195 mm 1.4 kg/piece
Sold 1 McIntosh Print Used for drive tubes of the company's MC275CE Made in China (rejection value 50) * Measurements are gm values measured on tv-7 tv-7 (Yosuke Kojima )
Accessories: None
Sold 1 McIntosh Print Used for drive tubes of the company's MC275CE Made in China. Measured value 62 (rejection value 50) * Measurements are gm values measured on tv-7 tv-7 (Yosuke Kojima )
Accessories: None
This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W1165 x H45 x D580 mm
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
Sound output has been confirmed, and since it is inexpensive, it is currently sold. This speaker was designed for the company's FR-N Hi-MD components. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: W167 x H290 x D230 mm 3.9 kg (actual measurement)
※Shipping service. “Audio Vacuum Tube Manual” /Published by Radio Engineering Company/by Ichiki Yoshinori/A revised edition that carefully selects the “All Japan Vacuum Tube Manual” published in Showa 33 for audio applications. S60.7.20 first edition issued. The photograph is a sample, so the actual product may be broken, written, etc.
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
Speaker stand for the company's S-55twin. It is a size that is useful for other small and medium speakers. In addition to the exterior and veneer peeling on the side of the bottom, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W310 x H498 x D350 mm weight 5.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro)
Maintenance information: 2023.5.5 operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
Pair tube, subthermal beam tube, made in China, seems to have been used in the company's power amplifiers, etc. Measured value 68/66 (rejected value 44) with replacement box*The pair is determined based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube, subthermal beam tube, made in China, seems to have been used in the company's power amplifiers, etc. Measured value 66/64 (rejected value 44) with replacement box*Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube, subthermal beam tube, made in China, seems to have been used in the company's power amplifiers, etc. Measured value 64/64 (rejected value 44) with replacement box*Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Remote control for Ayre K-1 Operation was checked at the company's K-1 x. If you are looking for one, why not (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Speaker cable, 2.5 m pair, SOS3+ single connection, Y lug specification on both ends, standard model of the company's speaker cable. There is little dramatization, and the sound is light (Kojima Yosuke)
Accessories: none
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
Speaker cable, 2.9 m pair, company Y lag/banana plug specification, 8-core structure, LGC copper conductor, 4 types of different diameter wires, has a sense of energy close to advanced models, and has excellent cost performance. Colored tape is wrapped around some sheaths (Kojima Yosuke)
Accessories: none
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
※The vertical stand is missing, and there are many small scratches, so it is cheap, and it is currently sold. Stand is missing. The company's first standalone USB-DAC and headphone amplifier that is also compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. In addition to the exterior and tape marks, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: AC adapter
Main specifications: DSD signal sampling frequency 2.8224, 5.6448 MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
※Accessories such as spikes are missing, so it's cheap. A stand designed for the company's 705 and CM1 bookshelf speakers. It will also fit similar sized third-party speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate size 160 x 220 mm W278 x H595 x D368 mm 10 kg/bottle
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
※1 bottle only. The diaphragm has been replaced with a D8R2421. It is an 8 ohm specification. Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 23890 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. (This is a genuine diaphragm, but it comes with D8R2421)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 8 ohms (3.8 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
The price has been drastically reduced. 2021.6.23 sales price 49,800 yen ※Conductivity has been confirmed, but since the terminal has not been treated and the ground wire is broken, it is currently sold. Exclusive tone arm for DECCA MARK 1/2/3 cartridges. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal state for the head of the company (Murakoshi Yoichi)
Maintenance Information: 2021.6.13 Continuity Confirmed
Accessories: armrest
Main specifications: static balance type, total length 303 mm, execution length 225 mm
The price has been reduced. 2024/2/20 sales price 49,800 yen 2-way bookshelf speaker system. It's the most compact speaker in the company's 600 series, yet it's second to none in terms of power and accuracy due to the new separate double dome tweeter and design improvements. It is in good condition (Sasaki Shota)
Maintenance information: 2024.2.20 sweep test good
Accessories: none
Main specifications: playback frequency 54 Hz to 50 kHz efficiency 85 dB impedance 8 ohm crossover 4 kHz dimensions W160 x H315 x D229 mm weight 4.6 kg
The price has been reduced! 2024/5/17 sales price 49,800 yen Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches and line scratches. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (The mechanical fixing parts were manufactured and replaced in 1 pair. The clamper and loading belt have been replaced. The velocity coil has been repaired and corrected. (The tact switch on the operation panel has been replaced)
Accessories: remote control
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
The price has been reduced! 2024/4/23 sales price 59,800 yen Manufacturer maintained! The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There is dullness and a feeling of use. Serial 1050502942 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 manufacturer maintained (main volume and selector switch disassembly contact cleaning. (Idle current adjustment, operation inspection implementation)
Accessories: power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible dimensions W434 x H180 x D478 mm weight 22 kg
Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
The price has been drastically reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
The price has been reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1 ohm diaphragm scratch) DCR (b/6.3 ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
The price has been reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement. Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced. 2024/5/24 sales price 79,800 yen This is a standard professional 1-inch screwdriver model. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained by the manufacturer! The second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 7061502031 (Yamato Yuki)
Maintenance information: 2024.5.17 Maintained (tray washing loading belt, tray opening/closing SW replacement)
Accessories: instruction manual remote control
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
The price has been reduced! 2024/6/6 sales price 99,800 yen with box! A pre-main amplifier with clear sound without unnecessary dramatization. You can enjoy the company's unique tone, which is clear yet powerful and sharp. Both the exterior has a modern and smart impression. You can use it regardless of genre. There is a small scratch on the top plate on the exterior. Serial 130140015 (Jun Tamai)
Maintenance information: 2024.6.6 sound released and confirmed
Accessories: original box manual, remote control, power cable, spike
Main specifications: 75W+75W (8Ω) 115W+115W (4Ω) W420 × H88 × D214 mm 7.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/27 sales price 148,000 yen Maintained! It is a model that is small yet has a calm and glossy tone. A combination with European speakers is recommended along with the company's Pre-44. A slightly more modern taste than the 405 has been added. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial Q078428 (Hiroki Aso)
Maintenance information: 2024.4.27 maintained (internal dismantling check, power Tr driver, Tr check, replacement of each C in the board, partial soldering, defect correction, bottom rubber foot mounting operation check)
Accessories: copy of instruction manual DIN to RCA (female) conversion cable, power cable (general purpose)
Main specifications: 100W+100W W341×H115×D195mm 9.0 kg