The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with an upper and lower 20cm woofer. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
Maintained! A power amplifier from the USA Marantz era. The compact yet powerful American sound is attractive. It works great with speakers that make a lot of noise, such as JBL, and you can enjoy an exciting sound that is clear. Exterior, paint deterioration, dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (lamp replacement (replacement), power stage Tr check, C replacement, DC offset, bias adjustment, relay contact cleaning, operation check)
Accessories: none
Main specifications: 80W+80W (8Ω) damping factor 30 (8Ω) power meter (sensitivity can be switched in 3 levels) mounted dimensions W358 x H120 x D273 mm weight 11 kg
A compact speaker that makes it easy to enjoy JBL sound. Equipped with a compression driver, it has a nice, energetic sound. Visually, the blue baffle and walnut finish create a JBL-like atmosphere. In addition to discoloration on the exterior and corn paper, you can also see a feeling of use such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: saran net, instruction manual
Main specifications: impedance 6 ohms sound pressure level 89 dB W273 x H460 x D284 mm 11.5 kg
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
The price has been reduced! 2024/3/4 sales price 59,800 yen ※The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. Scratch marks and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
The price has been reduced! 2024/5/13 sales price 59,800 yen ※ It is cheap because chips and oxidation are conspicuous in the horn part. A tweeter representing JBL. It gives an expression with a greater sense of depth and expansion than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
The price has been reduced. 2024/5/19 sales price 54,800 yen ※Currently sold. JBL/UREI professional power amplifier Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. There are conspicuous abrasions on the exterior and top plate, and a feeling of use such as dullness and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
8000 Hz network for high range It can also be used in combination with JBL 077 or when combining a full range with a tweeter. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal terminal deterioration replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 8000 Hz check OK)
Accessories: none
Key Specifications: 2 Way Variable Level Control Crossover Frequency 8kHz 8Ω Weight 0.9 kg
Maintained! A 1500 Hz crossover network perfect for combining the LE14A with the 175DLH and LE175. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained. With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 7000 Hz check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! JBL's 2-way network. An essential item when adding a tweeter driver to a full range unit such as the D130. The exterior has paint peeling and dullness. Serial 39585 38470 (Tomonori Asaine)
Maintenance Information: 2024.5.16 Maintained (12 Terminal Mounting Screws, 24 Insulating Bushings, Terminal Cleaning, Attenuator, VR Replacement, Crossover Check)
Accessories: none
Main specifications: 2-way network 8 ohm crossover 2,500 Hz W121 × H153 × D93 mm 0.7 kg
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
※1 bottle only. The diaphragm has been replaced with a D8R2421. It is an 8 ohm specification. Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 23890 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. (This is a genuine diaphragm, but it comes with D8R2421)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 8 ohms (3.8 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
A backload type enclosure that can mount an unspecified JBL38cm woofer. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
*Since corn paper is coated, it is inexpensive and is currently sold. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about spares etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main Specifications: 30cm Woofer Unit Maximum Input: 75W Sound Pressure Level: 89dB Playback Frequency Band: 40 to 3kHz Recommended Cross: ~1.5 kHz Impedance: 8 ohms Diameter 310 x Depth 107 mm 6 kg
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi)
Accessories: None
Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. There is light rust on the mounting surface. Serial 6754/3758 (Murakoshi Yoichi)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/24 sales price 29,800 yen ※1 wooden horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (stop 3 points). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Takahashi Nobuyuki)
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
A compact and lightweight flat front biladial horn. It keeps horizontal characteristics constant and is useful for correcting driver characteristics (Daiki Goto)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high-density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
※It is inexpensive because it has cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. There is dirt and dust on the exterior (Tamura Eiji)
Accessories: none
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
※ Because it is cheap, it is currently sold. JBL 2-way speaker. It is a large, well-balanced model that is easy to use. It is also recommended as a speaker for BGM in stores, etc. On the exterior, there are stains and adhesive marks on the edges. Also, there are some holes on the sides. Serial 121213353121213 (Yonejima Satoshi)
Maintenance information: 2024.5.19 sweep test good
Accessories: grill net
Main specifications: W152 × H232 × D140 mm 2.5 kg
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Self-made enclosure. The previous owner attached a JBL 38cm unit with a 1" driver and used it in 2 ways. It comes with casters. There is a lot of feeling of use, such as uneven paint. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W500×H790×D604mm 53.4 kg
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg