Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
A high-performance integrated SACD/CD player that is the successor to the DP-550. It is a stable sound that makes you feel the thickness of the mid to low frequencies, and the spread of sound from low to high frequencies is not excessive or insufficient. The USB terminal is compatible with 384 kHz 32 bit and 11.2896 MHz 1 bit DSD. The tray button printing is missing. There is a small scratch on the side (Sasaki Shota)
Maintenance information: 2024.6.9 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 4MDSD+ sampling frequency HS-LINK 32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), coaxial32kHz-192kHz, optical32kHz-96kHz (PCM), USB32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), 11.2896 MHz (DSD/ASIO only) output Level control 0 dB to -80 dB frequency characteristics 0.5-50,000 Hz dynamic range 116 dB dimensions W465 x H151 x D393 mm weight 18.8 kg
2024.4 Maintained! Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a higher frequency extension than the A730, and the overall balance from bass to treble is good, and the sound has a solid sense of sound pressure. There is dullness and small scratches all over the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 Maintained (CD mechanical pickup is movable by checking, dismantling, check assembly → reading OK. All other internal parts of the NG part have been replaced. CD disc plate replacement ~ aging test 6 days ~)
Accessories: power cord, instruction manual (copy)
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 598,000 yen manufacturer maintenance completed! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
The disposal price has been reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
The price has been drastically reduced. 2024/6/1 sales price 378,000 yen Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of instruction manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The price has been drastically reduced. 2024/5/26 sales price 278,000 yen Maintenance and cabinet repair completed! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
Maintained by the manufacturer! Remote control is missing. The highest-end model of Denon's integrated CD player. The relaxed low range makes you feel analog sound quality. The operation of loading a stabilizer with a strong sense of weight is unique to top loading. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 6031501867 (Hiroki Aso)
Maintenance information: 2024.6.4 maintained (tray opening/closing SW disassembly, contact cleaning laser pickup RF level check (however, repairs will not be possible if sound skips in the future or failure such as not reading TOC due to the disc), inspection of each part, operation test)
Accessories: instruction manual stabilizer original box
Main specifications: 2 analog outputs, 3 digital outputs, 2 digital inputs, W434 x H164.5 x D395 mm, 20 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tonearm. Dust coverless specification The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior has dullness, small scratches, and threads. Serial 00687/00688 (Yonejima Satoshi)
Maintenance information: 2024.6.11 sweep test good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound becomes a habit. The exterior is in a beautiful state due to maintenance. Serial 32648 32951 (Yamato Yuki)
Maintenance information: 2024.6.7 operation confirmed
2021.10.15 Maintained (exterior cleaning/repair saran frame painting/net replacement cone paper touchup/tweeter grill dent correction ATT cleaning unit detachable)
2012.1.27 Maintained (ATT replacement, capacitor replacement, input/output waveform and balance check, sound output check, frequency characteristic measurement, front baffle repair (touch-up painting), exterior cleaning, plate attachment (not completely flat because there were already quite a few wrinkles)
Sound output test)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji)
Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good)
Accessories: phono cable, instruction manual
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. There is a light thread on the top of the exterior. Serial 13466 13432 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 sound output confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
The disposal price has been reduced (member prices are not applicable) 2023/6/24 sales price 178,000 yen Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on both the body and dust cover on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: instruction manual, power cord, RCA cable, earth cable, original box, subway, shell
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
Maintained in March 2024! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. As for the exterior, there is a scratch on the top plate. Serial 611088582 (Tomonori Asane)
Maintenance information: 2024.3.21 maintained (tone and other switches dismantled and polished with grease applied (turnover, subsonic, muting, loudness, processor, input selector, reck-out, power supply direct, source direct, tape, MM/MC changeover switch), power amplifier, power circuit transistor, resistor, adjustment volume, diode replacement, solder repair, each volume, switch Cleaning, output relay, headphone relay replacement, DC, bias adjustment, interior and exterior inspection cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
The price has been drastically reduced. 2024/6/6 sales price 148,000 yen Manufacturer maintained! Accuphase CD player. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. There are many line marks, other small scratches, and a feeling of use on the top surface. Serial D0Y305 (Murakoshi Yoichi)
Maintenance information: 2024.6.4 manufacturer maintenance (tray opening/closing belt set and buffer spacer, operation switch, phase and capacitor replacement. Disassembly and cleaning of the loading mechanism. Operation, characteristic tests, aging tests, readjustment of parts, interior and exterior cleaning, insulation, and safety tests)
Accessories: remote control, instruction manual (copy)
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/5 sales price 148,000 yen Maintenance completed! Scarce! Mcintosh tubular 2ch mono FM/AM tuner. The band was changed from the US version to domestic use, and the deteriorated vacuum tubes, capacitors, etc. were replaced, and they were restored brilliantly. I take my hat off to the persuasive power of the tuning, and the super rich, sexy sound quality typical of McKinn, even just listening to the narration. In addition to paint peeling on the exterior and metal frame, you can also see a feeling of use over time, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintained (for US use → band change/AC100 → 117V step-up transformer added AC code exchange/block capacitor 50 μF x 4 replacement/3 electrolytic capacitors 20 μF, etc. · 5 ceramic capacitors 15 pF and others added or replaced · 2 vacuum tubes 6Be6 and 6AB4 replacements (both offset with supply 6V4) · AM antenna line 5m added · vacuum tube 6U8 and 6AB4 (2 6AU6 exchanges, IF/RF readjustment ※ operation checked with other AC117V)
Accessories: step-up transformer
Main specifications: Vacuum tubes used EF94/6AUC, 6BN6, 6BJ6 x 2, 6BA6, 6B4, 6B07A, 12AU7A, 6BQ7A, 6AL5, 6BU8, 12AU7R, etc., all 18 others W374 x H120 x D304 mm 7.7 kg
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency, 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input, 160 W, W650 x H204 x D314 mm, weight: 14 kg
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
Digital cable (BNC) 1.0 m (measured less than 1.2 m) An impeccably luxurious cable that combines delicacy and heaviness in each band. Not only is it clear and voluminous, but all sounds such as vocals, drums, and horns spread to the front, up, down, left, and right, creating a realistic sound. The exterior has deflections on the sheath (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
※The head pad is loose, so it's cheap. The earpads are in good condition. The Edition series flagship model is now in stock for the first time at Hi-Fi. It has a good balance from high to low frequencies, and it seems that it can be used regardless of genre. The ear pads are also soft to the touch and can be worn without stress. A slightly soapy scent remains on the body. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: special case, mini jack conversion plug
Main specifications: sealed dynamic headphone impedance 30 ohms playback frequency band 8 to 35,000 Hz sound pressure level 96 dB
Pair tube direct thermal triode made in England measured value 54/50 (rejection value 39) with replacement box The plate shape of the spring fixing part on the top of the head is slightly different on the left and right, and there is discoloration on the plate on one side ※ The pair was determined based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/10 sales price 198,000 yen Maintained! According to the 117V specification of the tubular mono FM tuner, reception is unstable at 100V. The Japanese band has been changed, and reception sensitivity is good. It is a tuner that strongly shows the characteristics of Mackin's sound, which is thick, soft, and glossy. There is corrosion and rust throughout the exterior. Serial 292099 (Tomoho Asaine)
Maintenance information: 2024.2.10 Maintained (meter readjustment with coil and right side volume, left side lamp off replacement, IF/RF/MPX readjusted)
2018.2.22 Maintained (VT12AT7 replacement/MPX section transistor replacement/RF/IF/MPX re-adjustment)
2016.1.25 Maintained (6 additional VT shortages. 2 VT replacements 4 additional ceramic C for BAND EX Ceramic C replacement. Chemical C exchange. Front lamp repair, block.C50uf x 4 replacement Step up transformer 100V ⇒ 117V added)
Accessories: 117V step up transformer
Main specifications: FM dedicated tuner W400 x H130 x D300 mm 8.6 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1220444 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
The price has been reduced! 2024/5/25 sales price 89,800 yen Maintained! CG25D is a staple mono needle and is the highest peak. The precise, thick, and thick sound brings out a unique sense of density that is different from stereo needles. The exterior is dull all over, and paint peeling can be seen on the body. Serial 137743 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (damper replaced)
Accessories: No accessories
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g, dead weight: 32 g
The price has been reduced! 2024/5/29 Denon luxury analog player with sales price 89,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic, easy-to-read sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Small scratches and threads are scattered on the exterior, lower front, top, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: instruction manual, saran net, spikes, hex wrench
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg