Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
Maintained! One of Sansui's few 2 to 4 way NF type channel dividers. It is a channel divider that pursues basic characteristics and multiple functions, and features a highly saturated tone that is close to JBL speakers. After adjustment, the ceiling panel is clean and the design is excellent. There are scratches and scratches on the exterior. Serial 238070032 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (mode selector disassembly contact polishing. Frequency selector x 6 disassembly cleaning Other volume cleaning. (Replace diodes and transistors to enhance power supply)
Accessories: front panel
Main specifications: 2/3/4 way NF filter channel divider with SNR 90dB or higher cutoff frequency (± 10%) [F1] 60/75/95/120/150/190/240/300/380/480/600/750/950/1.2k/1.5k/1.9k/2.4k/3kHz [F3] 1.5k/1.9k/2.4k/3k/3.8k/4.8k/6k/ 7.5K/9.5K/12K/15kHz low star function installed (turnover 60 Hz/100 Hz) W482 x H88 x D305 mm 6.4 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, stains, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The price has been drastically reduced! 2024/5/11 sales price 128,000 yen Maintained! Late QUAD44 with CD input terminal. It's not flashy, but the thick, glossy tone is attractive. In particular, it softens female vocals. Serial Q36114 (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (internal power supply switch contact dirt contact polishing treatment, balance VOL cleaning ~ check OK. Check the other boards and re-solder the holes. (C, R check OK)
2024.5.9 Internal power supply switch contact polishing treatment
Accessories: power cord
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement. Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
The price has been reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1 ohm diaphragm scratch) DCR (b/6.3 ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece