The price has been reduced! 2024/5/16 The CD mechanism has been replaced with Denon at a sales price of 35,000 yen! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
Maintained by the manufacturer! Remote control is missing. The highest-end model of Denon's integrated CD player. The relaxed low range makes you feel analog sound quality. The operation of loading a stabilizer with a strong sense of weight is unique to top loading. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 6031501867 (Hiroki Aso)
Maintenance information: 2024.6.4 maintained (tray opening/closing SW disassembly, contact cleaning laser pickup RF level check (however, repairs will not be possible if sound skips in the future or failure such as not reading TOC due to the disc), inspection of each part, operation test)
Accessories: instruction manual stabilizer original box
Main specifications: 2 analog outputs, 3 digital outputs, 2 digital inputs, W434 x H164.5 x D395 mm, 20 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Asaine Tomoho)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual cartridge, EP adapter, subweight
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
The price has been reduced! 2024/5/29 Denon luxury analog player with sales price 89,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. Stains are conspicuous on the exterior and front panel, and a feeling of use can be seen throughout, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.31 Operation confirmed
Accessories: remote control
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
※The vertical stand is missing, and there are many small scratches, so it is cheap, and it is currently sold. Stand is missing. The company's first standalone USB-DAC and headphone amplifier that is also compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. In addition to the exterior and tape marks, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: AC adapter
Main specifications: DSD signal sampling frequency 2.8224, 5.6448 MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
Maintained by the manufacturer! The 3rd generation model of the S10 series. Equipped with AL24 Processing, an analog waveform reproduction technology. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Yamato Yuki)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations, but if it breaks down in the future, pickups cannot be obtained. Loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 Operation confirmed
Accessories: connecting cable, adapter, dust cover
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
A small but authentic pre-main amplifier with a built-in FM/AM tuner. Comes with PHONO input (MM/MC), so you can enjoy analog well. It's a perfect match for those who can't play very loudly or for second systems. There are no major noticeable scratches on the main body, but there is corrosion on the battery part of the remote control (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 75W+75W (8Ω) 150W+150W (4Ω) MC/MM compatible AM/FM tuner built-in W300 x H80 x D341 mm 5.5 kg
Maintained! A D/A converter that was said to be close to analog sound. The high frequencies are tightened, the mid and low frequencies are mild, and the sound feels powerful with a sense of directness. The high cost performance also shines (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (21 replaced due to electrolyte condenser fluid leakage, electrolyte cleaning, pattern and solder correction, insulation washer replacement due to damage, sound and HDCD recognition checks on each input/output)
Accessories: manual, power cable
Main specifications: Input terminal/1 coaxial system, 1 optical system, ST link 1 analog output system (RCA) HDCD compatible D/A conversion chip using a multi-bit Barbrown PCM63P-K type W430 x H60 x D230 mm 4 kg
The price has been drastically reduced. 2024/6/2 sales price 498,000 yen straight pipes, only lightweight weights are included, and the armrest is an external item, so it's cheap. Maintained! EXCLUSIVE's popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. The exterior is broken in the corner of the dust cover, chipped glass, and finger tips are substitutes, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintenance completed (START, disassembly and cleaning in other buttons, servo circuit electrolytic capacitor replacement, rotation lock position adjustment, arm damping grease cleaning replacement, turntable height adjustment, armrest replacement (structure is different). (Arm operation, voice check)
Accessories: straight pipe, lightweight weight, instruction manual (copy)
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
Maintained! This time, not only does it have 1 S-shaped one, but it also comes with 2 straight pipes! EXCLUSIVE's super popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. There are small scratches, but it is a good category even when viewed from the model year (Oikawa Tetsuji)
Maintenance Information: 2024.6.9 Maintained (Replaced due to semi-fixed volume disconnection. The transistor was replaced due to rotational instability. The electrolytic capacitor has been replaced. The arm bearing was cleaned, operated, and audio-checked. Each rotation lock has been adjusted and the voltage has been adjusted. (Silicone grease attached)
Accessories: transport screws, subweights, 2 straight pipes, silicone oil
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
The price has been drastically reduced! 2024/5/23 sales price 198,000 yen ※This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve replacement. AC cord replacement Main bearing disassembly, bearing thrust replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing/added; nuts, metal washers, and rubber washers added. Running tests OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: No accessories
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
Set of 2 (the internal shape seems to be the same, but the manufacturer country print is different (made in Canada/USA), so they are not treated as a pair), brown base measurement value 44/42 (rejected value 25), getta burns, and decreases) *Measured values indicate GM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1220444 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tonearm. Dust coverless specification The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
NEW GENERATION LUXMAN A CLASS POWER AMPLIFIER! In addition to the warm sound quality unique to Class A, the range is wide and driving power is sufficient. It has resolution and instantaneous power compatible with the latest speakers, and can easily drive even large speakers. It goes well with recent European speakers. The exterior has line scratches on the upper center of the front and top plate, and several scratches on the upper front corner and upper back corner (Kanai Hidetsugu)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W (8Ω) BLT240W (8Ω) W440 × H230 × D480 mm weight 47.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 128,000 yen ※Depending on the arm base, the mounting position of the arm is slightly close to the shaft side. Since the arm is long, please remove the dust cover for playback. Comes with SAEC arm stabilizer AS-500! A record player that is highly regarded for its smooth rotation and the effectiveness of the insulator's suspension. The WE-308 arm features a double knife edge for sharp sound and accurate sound image localization. It is a combination of LUX's smooth and quiet motor and SAEC arms that cut sharply into the sound source, so you can fully enjoy the fun and depth of analog. Additional rubber feet have been attached to the legs to prevent the AS-500E. The exterior is dull and has small scratches. Serial G8903281 (Murakoshi Yoichi)
Maintenance Information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. (Inside Force cancellation weight exchange)
Accessories: phono cable
Main specifications: PD-131 direct drive system 8 pole 24 slot brushless DC servo motor W472 x H160 x D372 mm weight 12 kg WE-308 double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g cartridge weight range: 5.5 to 12.5 g
This model is limited to 200 units equipped with the highly acclaimed Philips 1-beam swingarm mechanism CDM9PRO. While inheriting the soft and thick sound of CD-23, the straightforward, flat, and well-balanced sound quality is attractive. As for the exterior, there is paint peeling around the legs. Serial MZ009644080005 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: Philips 1 beam swing arm mechanism with CDM9PRO, 1 input/output terminal/digital coaxial output system, 1 digital optical output system, 1 analog unbalanced output system, 1 digital coaxial input system, 1 digital optical input system, dimensions W250 x H124 x D281 mm, weight 6.3 kg
※The remote control is out of stock, so it's cheap. Marantz CD player with excellent value for money. The smooth sound quality spans from mid to high frequencies, so you won't get tired of listening even when you listen for a long time. This is a bargain machine with a sense of SN that is more than the price. There is dullness and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual
Main specifications: CD player, CD-R/RW/MP3 file playback compatible, HDAM circuit adopted, size W440 x H89 x D317 mm, weight 5.7 kg
Maintained! ※It has been changed to an RCA terminal. Marantz's masterpiece CD player equipped with the Philips swing-arm mechanical CDM-1. The sound is rich, analog-like. It has the same feeling of use as time has passed (Daiki Goto)
Maintenance information: 2024.6.8 maintained (slide motor belt NG → replaced. There is poor thru-hole soldering in the decoder board → all re-soldered. Bypass C NG in other servo boards → replace. ~ CD mechanical turntable motor bearing concave → correction ~ reading check)
Accessories: copy of the manual
Main specifications: Philips swing arm mechanism equipped with CDM-1 14 bit DAC W320 x H90 x D300 mm 7 kg
Pair tube smoke made in Canada JAN measured value 86/76 (rejected value 46) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Comes with an indicator If you're an audiophile, this is a British “static electricity removal pistol” that you definitely want to have. With a mechanism that neutralizes static electricity with positive and negative ions, incidental sounds disappear, and the sound quality of analog records and CDs is improved to a clean sound with good visibility. Can be used approximately 50,000 times without using batteries (Asaine Tomo)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box, indicator
Key Specifications: Static Electricity Removal Accessory for LP/EP
1 PIN is missing and only 3. Monster Cable's crimping banana plug has an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: crimping type φ4 mm
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
2-row 6-piece outlet plate made of corrosion-resistant aluminum alloy+fully coated new metal There is a feeling of use such as small scratches (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 x H116 x D6.5 mm weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
This is a pre-main amplifier that allows you to enjoy everything from analog records to the latest high-resolution sound sources with high sound quality. The sound is clear and highly transparent, and it outputs music with a high sampling rate even more attractively. An independent dedicated board phono equalizer compatible with MM/MC is used. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 4Ω/60W+60W 8Ω/30W+30W practical maximum output 90W+90W frequency characteristics 10Hz-100kHz W435 x H139 x D331 mm 9.2 kg
Maintained! A high-performance preamp developed by Onkyo in the early 1980s. It is equipped with 3 types of cartridge selectors for 2 Phono inputs, making it a great specification for analog users. The way the dry mids sound is reminiscent of the sounds of the 60s and 70s. There are conspicuous line marks on the top plate and dents on the corners (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/indicator lamp replacement, mode, recoup, input selector, cartridge selector, subsonic switch disassembly, polishing grease application, operational amplifier replacement, solder repair, each volume, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: input LINE3 system PHONO2 (MM/MC) system power consumption 26W dimensions W450 x H990 x D403 mm weight 9.5 kg
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
2-row 6-piece outlet plate with corrosion-resistant aluminum alloy+full coated new metal. There is no problem with the appearance (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm
※ There is no problem with operation, but since it is cheap, it is currently sold. Panasonic CD player. A CD player that uses a MASH 1-bit DAC and a unique swing arm mechanism. It's a natural sound with no quirks, so you can enjoy it in a wide range of genres. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: frequency characteristics 2 Hz to 20 kHz W430 × H130 × D333 mm 5.2 kg
Disposal prices have been reduced. Member discounts are not applicable. 2022/12/3 sales price 1,000 yen. ※1 piece only PANASONIC ceiling mounting bracket Recommended for those who have a Panasonic compact speaker and are thinking about hanging it from the ceiling (Hiura Katsutsugu)
Accessories: original box
Main specifications: diameter 140 x H93 mm weight 0.5 kg
Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg