Comes with original box and hex wrench Banana Plugs, Set of 4, Phosphor Bronze, Silver+Rhodium Plated Banana Plugs with a beautiful direct plating design. You can also increase the resolution with your own system
Accessories: original box, hex wrench
Digital cable (BNC) 1.0 m (measured less than 1.2 m) An impeccably luxurious cable that combines delicacy and heaviness in each band. Not only is it clear and voluminous, but all sounds such as vocals, drums, and horns spread to the front, up, down, left, and right, creating a realistic sound. The exterior has deflections on the sheath (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The price has been reduced! 2024/6/4 sales price 67,800 yen ※The remote control is out of stock, so it's cheap. Maintained! CD turntable player. The 1-bit DAC “High Speed Pulse Flow D/A Converter” developed in-house was adopted, and I have the impression that it is more detailed and smoother than the PD-T07 one generation ago. There is a feeling of use on the exterior, such as dullness and old scratches. Serial LK1004122 AS (Hiroki Aso)
Maintenance information: 2024.6.4 Maintained (after cleaning the focus lens, check the mechanical electrical system adjustment of the fixed servo mechanism part with a dedicated adhesive RF playback level of 1.5 Vp-p)
Accessories: none
Main Specifications: Turntable CD Player Dimensions W440 x H140 x D365 mm Weight 12 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Main specifications: W600 x H1200 x D230 mm 16.5 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Accessories: none
Main specifications: W600 x H1200 x D230 mm 16.5 kg
The price has been reduced! 2024/6/9 sales price 258,000 yen current product! First arrival at Style 35 Hi-Fi Hall with a beautiful piano black finish! The newly developed ribbon tweeter and woofer achieve high fidelity and strength with traditional diaphragms. As for the exterior condition, there are slight scratches on the side (Yamato Yuki)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box saran net
Main specifications: 2-way rear bass reflex type 85dB 4Ω W179 x H304 x D284 mm 6.8 kg
The price has been reduced! 2024/6/8 sales price 89,800 yen ※All 5 tier types with 2 tiers of CLEAR GLASS and 3 tiers of black. Spike specification In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. Although the exterior has a light feeling of use, it is good without noticeable scratches (Tomoho Asaine)
Accessories: none
Main specifications: inch step W600 x H850 x D475 mm from above shelves, 100 mm, 180 mm, 220 mm, 220 mm (actual measurement)
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The price has been drastically reduced. 2024/6/8 sales price 198,000 yen A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals. The exterior, the SP terminal metal part is dull, and small scratches are scattered on the spikes, and a feeling of use such as dullness and abrasions can be seen throughout (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, spikes, cloth cover
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 35Hz-20kHz impedance 4Ω output sound pressure level 90dB W237 x H1080 x D310 mm 25 kg
This is a rare insulator made by Sony. It is a well-made insulator using air, rubber, and oil. There is a feeling of use, such as marks of the device being placed on it. (FUJISAWA KOSHI)
Accessories: none
Main specifications: maximum load 30kg/weight 89g/piece per 4 pieces
The price has been drastically reduced. 2024/6/8 sales price 128,000 yen Sun Valley 6550 push pull The design imitates Macintosh amplifiers of yesteryear. The sound design is bright, energetic, and supple, and has excellent sharpness that is more responsive than a normal transistor amplifier. There is dullness, dirt, small scratches, and dullness on the metal part of the power cord (Murakoshi Yoichi)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: power cord
Main specifications: 6550 push-pull rated output 40W+40W using vacuum tube 6550, EL84 x 4 (SOVTEK), 12AX7EH x 2 (electro-harmonix) 4Ω/8Ω compatible W430 x D270 x H200 mm 18 kg
SP cable BW (Y lug → banana) 2.0m pair early 90s Synergistic Research
cable You can fully feel the sound unique to SOLID and thick Synergy with this entry cable. The exterior is dull due to aging (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The price has been drastically reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
※ Sub weight is missing. Dust cover hingeless design 5th generation of the SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. There is dullness, small scratches, and threads on the dust cover (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: dust cover, EP adapter
Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
The price has been reduced! 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
The price has been reduced. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
※The head pad is loose, so it's cheap. The earpads are in good condition. The Edition series flagship model is now in stock for the first time at Hi-Fi. It has a good balance from high to low frequencies, and it seems that it can be used regardless of genre. The ear pads are also soft to the touch and can be worn without stress. A slightly soapy scent remains on the body. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: special case, mini jack conversion plug
Main specifications: sealed dynamic headphone impedance 30 ohms playback frequency band 8 to 35,000 Hz sound pressure level 96 dB
The price has been drastically reduced! 2024/6/8 sales price 1,480,000 yen SARASTRO from Canadian high-end speaker manufacturer VERITY AUDIO is in stock for the first time at Hi-Fi! The color has a piano black finish. The ribbon tweeter, which is also used in the company's higher-level models, reproduces the appeal of this unit up to 50 kHz without stress. The balance between the highly transparent and realistic sound details and the voluminous woofer section is exquisite. Adjust the low frequency by distance from the wall. Please enjoy the sound that is rich in scale. There is a slight scuff on the side and a scratch on the upper rear corner. Serial SM1031, SM1032 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, jumper cable, spikes
Main specifications: 3-way 3-speaker bass reflex type frequency characteristics 20 Hz to 50 kHz efficiency 93 dB impedance 8 ohms W280 x H1200 x D508 mm 135 kg
*Lead wire is missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 10 g (actual measurement)
Comes with a dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/4 sales price 780,000 yen A high-performance speaker that condenses the sound production of the multi-cabinet SYSTEM7 into a single cabinet. The balance between dynamism, wide range, and sense of sound localization is excellent. Another advantage is that it creates a sound that is less likely to be affected by the performance of the amplifier. There is a partial tear in the corner of the saran net, and there is a linear paint crack separating the top and bottom on the right side of one (Sasaki Shota)
Maintenance information: 2024.6.3 sweep test is good
Accessories: manual, spike, spike holder, cover
Main specifications: 3-way 4Ω frequency characteristics 29Hz to 22.5kHz 89dB W320 × H1040 × D460 mm 73 kg
XLR decimal cable 1.5m Glen optimized 4N silver wire+polymer coating A rare digital cable. GOLD ECLIPSE has a reputation for its thickness, smooth texture, and good tone. The bright texture with high musicality is attractive enough. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
It is expressed in detail without leaving any sound field expression or afterglow of the sound, and has a well-balanced and natural impression compared to a short bar (Oikawa Tetsuji)
USB cable The core model of the company's USB cable using a 2.0m S2AB Silver-Clad OFC conductor. If you switch from a general-purpose USB cable used for data, etc., you will be amazed at the three-dimensional, realistic, and dynamic sense of sound. Recommended for those who do not have an audio USB cable (Kojima Yosuke)
Accessories: none
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images.
A stabilizer that appears to be made of brass. Details are unknown, but it is a sturdy construction with a profound feeling. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: diameter approx. 79 mm, height approx. 24 mm, weight: 934 g (all actual measurements)
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: case
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. ※The blister is out of stock. (FUJISAWA KOSHI)
Accessories: none
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece
Maple type. Stand for small speakers made of solid Yonematsu. Compatible with most small speakers. The combination of Corian base and wood block material makes it resonate aggressively and accentuates the sense of spaciousness and depth. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 6 spacers
Main specifications: W280 x H615 x D370 mm 6.6 kg
*Currently sold. Aiwa's DSD DAC. A/D converter and D/A converter set. It is possible to reproduce DSD 1-bit 64fs signals in SACD format. Even with analog input from compressed sound sources such as MP3s, the sense of localization, sound field, and luster of sound are improved. Serial D101211111 WD01210911 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: power adapter, HMDI connection cable, instruction manual
Main specifications: AX-D1: DSD1 bit/64 fs playback frequency band 20 Hz to 100 kHz (+0/-3 dB) dynamic range 102 dB or more, SNR ratio 102 dB or more at 1 kHz, 107 dB or more at 20 kHz channel separation 100 dB or more size W250 x D170 x H50 mm weight 1.5 kg AX-WD: LPCM192 kHz/24 bit/128 fs DSD1 bit/ 64fs (DSD64 mode, 2.8224MHz) size W250 x D170 x H50 mm weight 1.6 kg
The price has been drastically reduced. 2024/6/5 sales price 348,000 yen Maintained! This is a very well made 300B single amp. The outstanding sharpness and power, and sweet and gorgeous sound are unbearable. The JJ 300B is used as the output tube. It is a combination of the popular transformer TAMURA F-2007 pair, PC-3004, and A-4003. The first stage uses 12AT7, and the rectifier tube uses 5AR4. It comes with a volume and can be connected directly to a CD. There is a ham balancer inside (Yasuhito Koshihama)
Maintenance information: 2024.6.5 maintained (AC cord missing added; wiring changed to output impedance 4Ω → 8Ω; main volume 100K B curve → 2 replacement; vacuum tube 12AT7 deterioration replacement; RCA jack and vacuum tube socket caulking repair. Operation checked with AC 100V (measured with rated output 10W+10W SP8Ω)
Accessories: power cable
Main specifications: output 10W+10W (actual measurement) W434 × H217 × D333 mm 18.9 Kg (actual measurement)
The price has been reduced. 2024/5/24 sales price 35,000 yen Tannoy rectangular yoke type enclosure by Shinkosha, a popular manufacturer of domestic boxes. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg