Set of 4 large insulators. The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
※It is inexpensive because there are many stains. A classic shell made from machined aluminum blocks. I like the sturdy construction and simple design (Murakoshi Yoichi)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
Tannoy Mercury series small bookshelf. It uses network technology that follows the technology of the company's Prestige “SE” series. Silver-coated copper wire manufactured by Vandenhall is used for internal wiring to enhance sound quality. There are dust stains on the tweeter dome, small scratches such as peeling veneer on the upper front corner, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2 way 8Ω 86dB W140 × H210 × D160 mm 2.2 kg
An EAR stereo power amplifier boasting a large 70W output with a KT90 parallel push configuration. While having the torque to drive large speakers, the beautiful sound that is glossy and intense is an appeal unique to EAR vacuum tube amplifiers. It also supports balanced inputs, so you can enjoy various combinations from vintage to high-end systems. It is slightly dull and has threads. Serial 010113 (Takasaki Atsushi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: manual, power cord, cleaning cloth
Main specifications: 60W+60W (8Ω) class A parallel push-pull vacuum tube ECC83 x 2, ECC82 x 2, KT90 x 8 W405 x H165 x D405 mm 24 kg
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
In January 2023, both the interior and exterior were maintained and brushed up! ORIGINAL LANSALOY EDGE! The OLYMPUS S8R representing JBL has arrived. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. Outside of the exterior, the back plate on one side is missing, and the finish is beautiful due to maintenance (Kobayashi Hitoshi)
Maintenance information: 2023.1.10 maintenance (exterior repair, polishing, baffle/hakama repair before and after oil finishing, painting, lattice repair, polishing, painting, lining replacement. Woofer maintenance (edge softening treatment, corn paper coating, passive corn paper coating). Driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound-absorbing material replacement, terminal contact cleaning). Tweeter maintenance (horn disassembly/polishing, magnetic circuit rust removal/gap cleaning, terminal contact cleaning). Network maintenance (LX5: terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. Reinforced with silicone to prevent the coil from coming off A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. N7000 terminal rust removal, acid cleaning, insulation bush, and mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net, diffuser, instruction manual
Main specifications: 3-way 3-speaker passive radiator system low range unit 38cm cone type (LE15A) mid range unit horn type (375) high range unit (075) passive radiator 38cm cone type (PR15) network LX5/N7000 sound pressure level 95dB allowable input 125W dimensions W1020 x H670 x D510 mm weight 82 kg
The price has been reduced. 2024/4/29 sales price 13,000 yen. ※Operation has been confirmed, but since it is cheap, it will be handed over as is. It is a high-resolution DAC equipped with the high sound quality DAC PCM1794A from TI's audio IC brand Burr-Brown. By using it between a PC and audio, high-resolution playback on a PC is possible, and it delivers powerful and precise sound (Kobayashi Hitoshi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: power cable
Main Specifications: Format: PCM [USB] maximum 24 bit 96 kHz [optical/coaxial digital input] maximum 24 bit/192 kHz digital input [3 systems] USB TypeB terminal/optical digital audio input (square type) coaxial digital audio input SNR: 109 dB dynamic range: 110 dB total harmonic distortion: 0.004% or less (20Hz-20kHz) DAC IC: Texas Instruments Burr- Brown PCM1794A compatible OS: Windows 10/8 (8.1) 7/Vista/XP/2000/macOS X/9.1 or later
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The price has been drastically reduced. 2024/4/26 sales price 19,800 yen ※There is wobble on one side, so it's cheap. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)