* 2-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W595 x D473 x H295 mm, 180 mm between shelves (actual measurement)
Set of 4 spikes from Jeff Roland A spike holder is also included. The know-how on resonance countermeasures cultivated over many years is being used to the fullest (Mizusaki Ryo)
Accessories: original box, instruction manual
Main specifications: spike 32 x 18.5 mm, 21 g/piece, base 32 x 3.5 mm, 21 g/piece
Component cable 10.0m brings out the original high-definition video from a DVD with digital component recording as it is, giving it a sharp black depiction and a sharp three-dimensional effect (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
Set of 4 spikes from Jeff Roland A spike holder is also included. The know-how on resonance countermeasures cultivated over many years is being used to the fullest (Mizusaki Ryo)
Accessories: original box, instruction manual
Main specifications: spike 32 x 18.5 mm, 21 g/piece, base 32 x 3.5 mm, 21 g/piece
Standard model of the F-8 series. Compared to the other F-8 series, it is sharp and produces a colorful sound. Both stylus and cantilever are good. The exterior has a feeling of use such as dullness and scratches on the body (Mizusaki Ryo)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: needle cover
Main specifications: frequency band 10 to 35,000 Hz output voltage 5 mV needle pressure 0.5 to 2.5 g (optimal 1.5 g) dead weight 6.5 g
Speaker cable with 3.5 m pair soldered ends. It is a solid sound that clearly shows the backbone of the LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
※This is a rare Torrance extra thick speaker cable with only 1 speaker cable with an unprocessed 5.0 m end! The shadows and depth come out deep (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
YAMAHA MC type cartridges. It plays strings and vocals with high transparency and freshness. Both stylus and cantilever are good (Ryo Mizusaki)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: needle cover
Main specifications: 10 Hz to 45 kHz output voltage 0.5 mV impedance 50 ohms needle pressure 2.0 g dead weight 8 g
A unique set of 4 insulators that can adjust the number of springs according to the weight of the main body being used. Each insulator is arbitrarily adjusted using 5 leaf springs to ensure a maximum load capacity of 12.5 kg per insulator (maximum 50 kg when using 4). It is a special insulator that pursues vibration damping properties. You can see the exterior, dullness, abrasions, and feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: spring type insulator, machined brass body, bronze leaf spring (press stamped), diameter approx. 40 mm, height 30 mm (36 mm with 5 springs included), approx. 200 g/piece, maximum load capacity 50 kg (when 4 insulators are used, 5 springs are loaded)
Power cable 1.0 m It is a high cost performance power cable that received information and materials from the development stage of PC-Triplec conductors and brought out the performance of the conductor to the maximum (Yoichi Murakoshi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: original box
The price has been reduced. 2024/6/28 sales price 198,000 yen This is the successor to MYTEK's hugely popular USB-DAC, LIBERTY DAC. Whereas the first generation DAC chip was the ES9018K2M, this model is equipped with the ES9038Q2M. There is no need to install troublesome drivers, and it supports up to PCM384 kHz and DSD 11.2 MHz simply by connecting. Of course, it is also compatible with MQA, and its compact yet large-scale sound is attractive. The exterior is generally good. Serial 10424-2225-049 (Tomonori Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: instruction manual power cable (general-purpose product) *Remote control missing
Main specifications: input terminal USB (B) x 1, RCA coaxial x 2, TOSLINK x 1, AES/EBU x 1 output terminal XLR balance x 1, 6.3mm headphone x 1, headphone amplifier output 300 mA compatible sampling rate PCM384 kHz/32 bit when connected to USB, DSD256 (DoP) W140 x H44 x D225 mm 2 kg
Refined model equipped with LS-R0i high contact reliability rotary switch. In addition to the rotary switch, this line selector has carefully selected high-quality parts for connectors and internal wiring, and has a housing design that prevents external noise and vibration, so it can transmit the original sound as it is. The exterior is generally good (Tomonori Asae)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: none
Main specifications: RCA cable 3ch line selector W250 x H64 x D128 mm 2.4 kg
LUXMAN discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: none
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
A 2-way system using an Orasonic 8cm full range unit and super tweeter, which was an appendix to DigiFi 19 and 20. A glass fiber diaphragm is used for the mid to low range, and the high range is matched to the full range, making it possible to reproduce from 2 to 40 kHz. SP terminals are bi-wire compatible (Murakoshi Yoichi)
Maintenance information: 2024.6.21 sound confirmed
Accessories: jumper cable
Main specifications: 8cm full range+soft dome 8Ω 88dB crossover unknown W140 × H279 × D180 mm 2.0 kg
*Currently sold. A control amplifier with a straight-through design. It is an amplifier that focuses only on improving sound quality. There are also plenty of phono circuits, so beginners and advanced players can enjoy it. There is a feeling of use on the exterior, and paint peeling and small scratches are scattered on the top plate. Serial 157570 (Asaine Tomoho)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: none
Main specifications: PHONO (MM/MC) with MONO/STEREO switching W430 x D317 x H66 mm 5.2 kg
The price has been drastically reduced. 2024/6/28 sales price 278,000 yen A network transport equipped with functions comparable to U2. A CNC-machined aluminum front panel is used for the all-aluminum housing to enhance structural rigidity and shielding. A new surface finish adopted from the higher-level model LUMIN P1 has been applied. The exterior has a feeling of use such as dullness. Serial 60220408-09-0829-1000726 (Tomoho Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: instruction manual copy power cable
Main Specifications: Compatible Formats DSD DSF (DSD) DIFF (DSD) DoP (DSD) PCM FLAC Apple Lossless (ALAC) WAV AIFF Compressed Audio MP3 MQA Compatible Streaming Service UPnP (OpenHome) Tidal Tidal Connect Qobuz Roon Ready Spotify Connect AirPlay TuneIn compatible sampling/bit rate PCM 44.1kHz-768Hz 16-32bit (stereo) DSD DSD64-512 (stereo) input 1000Mbps RJ45 x 1 USB storage (single partition FAT32 NTFS exFAT) digital output USB DSD64-512 PCM 44.1kHz-768kHz 16-32bit OPTICAL DSD64 (DoP) PCM 44.1kHz — 192kHz 16-24bit COAXIAL SPDIF DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit BNC SPDIF DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit AES/EBU DSD64 (DoP) PCM 44.1kHz-192kHz 16-24bit Dimensions W300 ×D244×H60mm weight 2.5kg
2-tier rack specification. The surface of the base plate is manufactured using a unique manufacturing method in which the surface is covered with a transparent acrylic plate, etc., and a fiber cloth is laid on a heat-resistant glass mold, epoxy resin for bonding is poured into an infrared oven for about 15 minutes, then an even thinner reinforced cloth is layered in three layers and dried naturally over about 12 hours. Carbon fiber itself exhibits excellent characteristics as a surface material. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae)
Accessories: none
Main specifications: stage inner dimensions W498xH182xD354mm outer dimensions W608xH 379xD465mm base SRX-1B (outer dimensions W608xH164xD465) for top placement SRX-1 (outer dimensions W608xH219x D465)
Unspecified set of 4 banana plugs. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
An audiocraft headshell that uses a perfect lock pin in addition to its sturdy construction with a hard aluminum molding. It has a degree of perfection that even feels beautiful in form, and the connections are solid, bringing out the full performance of the cartridge. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
Main specifications: Perfect Lock pin, hard aluminum molding, dead weight 13.7 g
Speaker cable 11.0m pair end untreated tinned high purity copper wire multi-core stranded speaker cable. A well-balanced, wide-band, and powerful dynamic range is a major feature. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
Optical digital cable 1.0 m uses high-purity quartz to eliminate phase disturbances and distortions as a square conductor. This is the best cable for those looking for a high quality optical cable. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: no accessories
The 1.0 m BNC specification digital cable uses GSV3 optimized silver wire+polymer coating. Recommended when you want a radiant tone and a sense of stability. There is discoloration on the plug, but other conditions are good (Kojima Yosuke)
Accessories: original box, instruction manual
Unspecified set of 4 banana plugs. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
SPL (German recording professional equipment manufacturer) input/output balance terminal volume controller. By using an active circuit design, it is possible to avoid a decrease in linearity due to impedance changes that occur in passive circuits. The volume is continuously variable, so there is almost no imbalance between left and right, and it expresses a high level of sound quality. The exterior has a feeling of use such as dullness and small scratches. Serial 9020974 (Tomonori Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: Power cable (general purpose)
Main specifications: 1 XLR input/output system W215 x H80 x D220 mm 1.6 kg
Sound Art's long-selling 3D speaker system. Once the setting is decided, it is a sense of scale and realism that greatly exceeds the size. * There is no problem with operation, but since the veneer has peeled off, cracks, etc., it is currently sold. *The subwoofer only has an RCA input, and the low frequency range does not appear even when input to the speaker terminal (Ryo Mizusaki)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers+woofer 100W 3D speaker system with built-in power amplifier satellite part W200 x H920 x D180 mm 9.5 kg, woofer part W430 x H300 x D580 mm 15 kg
A dedicated pre-main amplifier for Aura's line. A slim premain amplifier with a premium chrome finish. You can imagine it from a clean face. It has a silky tone and goes well with European speakers. There are dullness and scratches on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: 6 input systems with TAPE OUT 45W+45W (8Ω) Dimensions W430 x H62 x D310 mm Weight 5.0 kg
RCA cable 5.9 m pair This is an early model before the terminator module, which is also a characteristic of the company, was adopted. It's a sound with good sound separation and a good sense of localization. There is a lot of dirt and rubbing on the exterior (Kojima Yosuke)
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
RCA-XLR cable, 1.5m pair, 3rd hot specification, XLR male terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
Pair tube large punch top grid square getter code: 6413/6839 measured value 44/42 (rejected value 30) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Comes with original box. Set of 4 Y lugs This is a screw-fastening Y lug terminal by Oyaide, which boasts pure domestic production with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There are dullness and small wounds (Tamura Eiji)
Accessories: original box
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel significant changes due to power cables, and it is a high cost power cable. ※The wire material is hard, and this cable is slightly difficult to handle (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
RCA cable 1.2m pair finished LINN black cable If you're a fan of the company, you can't miss this classic cable. You can hear soft, smooth, precise, and well-organized sounds. (TAMURA Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
PC-Triple C, which has successfully arranged the crystal structure by forging to replace the 2.9 m PSE standard PC-OCC power cable, is used as the conductor. It has a cross-sectional area of 5.5 sq q, and is compatible with large output power amplifiers. (TAMURA Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
PC-Triple C, which has successfully arranged the crystal structure by forging to replace the 2.4m PSE standard PC-OCC power cable, is used as the conductor. It has a cross-sectional area of 5.5 sq q, and is compatible with large output power amplifiers. (TAMURA Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The 3-layer structure of the power connector, finished with female rhodium-plated carbon fiber, exudes a sense of luxury not found in this kind of self-acting plug. There is a tear in the coating (Tamura Eiji)
Accessories: none
The power plug has a 3-layer structure finished with rhodium-plated carbon fiber, which exudes a sense of luxury not found in this kind of self-acting plug. There is a tear in the coating (Tamura Eiji)
Accessories: none
RCA cable 1.0m pair 7N copper wire+3 types of copper wire, 8A core multi-hybrid conductor cable structure. It is an RCA cable that suppresses the individuality of the cable sound as much as possible and aims for a natural sound (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Balance cable, 1.2 m pair, LINN premium cable silver interconnect. Double shield construction using plenty of high-grade copper. It reproduces sound with a large sense of scale with chiseled deep bass (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: case
An unopened 5.0 m pair of RCA cables has been opened for confirmation. SAEC high quality cable designed to be optimal with amplifier output impedances of 100 to 600 ohms. The plug is discolored, and the sheath is sticky due to aging (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box