The disposal price has been reduced! (Member discounts are not applicable) 2024/8/13 sales price 99,800 yen ※It is cheap because the exterior is in poor condition. Woofer edge softening treatment has been applied to revive the original rich low frequencies. One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has a feeling of use over time, such as dents on the veneer, chipped corners, and torn saran nets. Serial 23781 23784 (Tomonori Asae)
Maintenance Information: 2024.8.13 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
Set of 4 Audio-Technica banana plug Insert the core wire of the cable that has been peeled off about 5 mm in advance, fold the tip back, tighten it back and fix the cable firmly before use. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
※This is the 3-core version of the 88760, with only one 2.3 m line cable with an untreated end. The Teflon jacket completely blocks outside noise. It is a cable that is easy to reuse. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2024.11.10 Continuity confirmed
Accessories: none
The price has been reduced! 2024/11/16 sales price 348,000 yen This tall boy speaker is a small size among ATC, which is famous as a monitor. The overall strength, such as sense of localization and energy, is high, and the mid-high range, which has a particularly good sense of tone, is exquisite. By raising the amplifier by 1 rank, it becomes even more attractive. The exterior has a feeling of use such as dullness. Serial 3369 3370 (Tomonori Asaine)
Maintenance information: 2024.11.16 sound output confirmed
Accessories: saran net jumper plate spike
Key Specifications: 3 Way 3 Speaker Sealed Tweeter: 25mm Diameter Soft Dome Midrange: 75mm Diameter Special Coated Polyester Woven Soft Dome Woofer: 165 mm Diameter Pure Pulp Cone Woofer 8Ω 85dB W230 × H965 × D315 mm 315 kg
Spiked insulators It's a large size that isn't often available, so if you're looking for one, take this opportunity. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: diameter 42 x height 20 weight 39 g (actual measurement)
Spiked insulators It's a large size that isn't often available, so if you're looking for one, take this opportunity. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: diameter 42 x height 20 weight 39 g (actual measurement)
A full-body phono equalizer made in Japan. By adopting the latest circuitry and high-quality sound elements, the appeal of analog discs is brought out even more. The front panel is easy to handle, and can perform everything from impedance adjustment to GAIN adjustment and MM/MC switching, and is finished to create a thick and supple sound. The exterior has dirt marks and dirt on the inside of the front panel. Serial A5Y113 (Fujisawa Yukishi)
Maintenance information: 2024.11.15 Operation confirmed
Accessories: instruction manual, power cord, connection cord, cloth, original box
Main specifications: phono equalizer RIAA deviation (MC) 10 to 20 kHz, (MM) 0 to 20 kHz input impedance MC/3 Ω, 10 Ω, 30 Ω, 100 Ω, 300 Ω, 1 kΩ mm/1 kΩ, 47 kΩ, 100 kΩ input terminal 3 system output terminal RCA x 1 system, XLR x 1 system W465 x H114 x D407 mm 14.5 kg
A basic model of the project's best-selling phono equalizer series PHONO BOX. The compact chassis is not bulky even when placed next to the player, and the high sound quality is attractive (Tomoho Asae)
Maintenance information: 2024.11.16 sound output confirmed
Accessories: AC adapter original box instruction manual
Main specifications: input impedance MC100Ω, mm47kΩ input gain mm40dB, MC60dB W103×H36×D104 mm 570g
Maintained! Sansui 07 series 10th anniversary model. It is a model that has achieved a wide range with CD playback in mind. It is an amplifier with sound quality that is compatible with a wide range of sources of all genres, with a strong low frequency typical of Sansui. There are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.11.17 maintained (output relay replacement, selector lamp replacement, power amplifier section adjustment volume replacement, protector part transistor replacement, slide switch disassembly polishing grease application (phono selector, reck-out), push SW decomposition polishing grease application (input selector, tone, subsonic, ride ness, muting, frequency switching), master volume dismantling, cleaning adjustment, etc. Volume cleaning, interior and exterior inspection cleaning, pin jack polishing, adjustment*Relay operation takes 15 to 20 seconds)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) size W466 x H161 x D431 mm weight 21.5 kg
MC boost transformer for EMT XSD15/TSD15. The thickness and fineness of the mid-range are excellent. You can see a feeling of use such as appearance, dullness, stains, discoloration, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: none
Main specifications: 927 Dst/930 Dst built-in transformer, primary impedance 85 to 175 Ω, secondary 10 kΩ boost ratio 1:10 W 123 x H39 x D63 mm 240 g
* 3-core version of the 88760 with only one line cable end unprocessed. The Teflon jacket completely blocks outside noise. It's a cable that is easy to reuse (Murakoshi Yoichi)
Maintenance information: 2024.11.10 continuity confirmed
Accessories: n extension
Maintained! This is an original full range AXIOM 80 with WEMBLEY MIDDX engraving. That sound of standing up is the ultimate in transparency. The high sound pressure that quickly rises from the mid to high range is evident from the source to the completion of the player. The exterior has scratches and a feeling of use over time. *The shape of the magnetic cover is slightly different on the left and right. Serial 2327 2327 (Tomonori Asaine)
Maintenance information: 2024.11.17 Maintained (disassembling all parts, forming deformation and distortion of parts, maintenance, forming of damper edge blades, cone flatness adjustment, slit, rust removal center, yoke, rust removal, slit cleaning, rust prevention centering adjustment, assembly, centering adjustment of each part, and confirming operation)
Accessories: none
Main specifications: Cone type full range unit, 25 cm aperture input, 12 W impedance, 15 ohms, minimum resonance frequency, 20 Hz, playback frequency band, 20 to 20,000 Hz, pore magnetic flux density, 17,000 gauss, voice coil, aperture 2.5 cm
1U size power distributor. Equipped with a 3-level timing delay function, the rear panel is equipped with 12 AC outlets, and the front panel is equipped with 3 AC outlets. The speaker can be protected from noise from audio equipment generated when the power is turned on and off. Surge noise filters and line noise filters are built in, and a clean power supply with reduced external noise is supplied. The exterior has a sense of specification such as small scratches and dullness. Serial 808000 21T (Tomonori Asaine)
Maintenance information: 2024.11.9 continuity confirmed
Accessories: none
Main specifications: rated voltage 100V AC (50-60Hz) maximum rated power 1490W (14.9A) power consumption 6W (standby time 0.7W) W482 x H52 x D261 mm*3.6 kg including protrusions
common needle. Compatible cartridges are Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced! 2024/10/29 sales price 59,800 yen A half-size SACD player with a full aluminum chassis and aluminum tray. Similar to the regular series, the D/A section is also equipped with AL24 processing. The supple sound is pleasant enough to listen to. It's an authentic player that doesn't make you feel the size. There are scratches on the exterior. Serial 7041501932 (Yonejima Satoshi)
Maintenance information: 2024.10.29 Operation confirmed
Accessories: copy of instruction manual, remote control, power cable
Main specifications: SACD/CD player MP3/WMA file CD playable 1-bit DSD/16-bit linear PCM line output 1 system (RCA), 2 digital output systems (coaxial x 1, optical x 1) W300 x H80 x D310 mm 7 kg
PSE standard product! CSE 4-port power strip A rhodium-plated 1.5 m cable is attached to the outlet. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: 3P x 4 port dimensions W130 x H40 x D140 mm weight 1.6 kg
Die-cast aluminum shell It has its own weight and is well-built, and the design is stylish and creative. The rigidity is high and low frequency tightness can be expected. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.10 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
The price has been reduced! 2024/10/31 sales price 19800 yen*For professional use, we will sell it as is. 120V specification A high power amplifier boasting an output of 525W+525W. It is an amplifier with excellent driving power and good cost performance. Please note that the input is XLR. ※There is a pop noise when the power is turned on and off. Peels and abrasions are scattered on the exterior. Also, be aware that the power cable is short. Serial 050892-34 (Fujisawa Yukishi)
Maintenance information: 2024.10.29 Operation confirmed (operation confirmed at 100V)
Accessories: none
Main specifications: 525W+525W (8Ω) 850W+850W (4Ω) W483 × H133 × D305 mm 20.0 kg
The price has been reduced. 2024/11/14 sales price 148,000 yen*The top plate has stains, stains, etc. and the exterior is not in good condition, so it is cheap. First arrival! Genuine RF Enterprises A rare Claire D/A converter. The rich, thick sound that cannot be experienced with modern models is attractive. The sound is thick and you can enjoy a passionate cry. Please enjoy it with the MD-1 which is in stock at the same time (Oikawa Tetsuji)
Maintenance information: 2024.11.14 Operation confirmed
Accessories: power cable
Main specifications: W490 x H110 x D320 mm 9 kg
The disposal price has been reduced! (Not eligible for member discounts) 2024/11/4 sales price 1,280,000 yen*Inexpensive because the main body is cloudy and scratched. Limited edition of 500 units commemorating the 40th anniversary of B&W's founding. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. The exterior is cloudy, discolored, and has scratches. Serial 0000903, 0000904 (Fujisawa Yukishi)
Maintenance information: 2024.11.4 sweep test is good
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
The price has been drastically reduced. 2024/11/14 sales price 450,000 yen model equipped with a balance input board. It is an amplifier with little coloring and a silky touch while maintaining thickness. It is a best-selling model that is thicker than the later 38L, and enables 4 levels of gain control with internal switches. The amazing sound, which is both sharp and thick, is attractive because it is cool and heavy yet makes you feel delicate control. There are small scratches on the exterior, but it is a beautiful category (Oikawa Tetsuji)
Maintenance information: Maintained by Harman International on 2013.2.22 (balance switch dismantling, cleaning, other inspections and adjustments)
2010.11.14 Maintained by Harman International (capacitor parts replaced due to aging. Other inspections and adjustments)
Accessories: instruction manual, power cable, connection cable, LEMO pin x 4
Main specifications: dual mono configuration stereo preamp unbalance 6dB/12dB/18dB balance12dB/18dB/24dB main body W444 x H74 x W333 mm 4.5 kg power supply unit W194 x 74 x 333 mm 3.6 kg
The disposal price has been reduced. Member prices are not applicable. 2024/9/14 sales price 69,800 yen B&W CM series center speaker. The clear and clear sound typical of B&W and the beautiful exterior with piano black are attractive, and it is compatible with a wide range of applications from pure audio to theater applications (Ryo Mizusaki)
Maintenance information: 2024.9.14 sound output confirmed
Accessories: none
Main specifications: 3-way bass reflex type playback cycle band 40 Hz to 50 kHz (-6 dB) output sound pressure level 89 dB (2.83 V/1 m) W590 x H225 x D301 mm (including grill+terminal) weight 18.7 kg
Maintained! Comes with original box SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. Serial 710300 (Murakoshi Yoichi)
Maintenance information: 2024.11.15 maintenance (damper adjustment, string bending, yoke adjustment)
Accessories: original box, needle cover, instruction manual
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g
Pair tube thermal triode mesh top grid made in America code: 852/913 measured value 40/36 (rejected value 23) with original box (the box is torn and defective) both tubes make a crackling sound within the base tube ※The pair is determined based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube thermal triode mesh top grid made in America code: 813/813 measured value 40/38 (rejected value 23) with original box (the box is torn and defective) *Pairs are determined based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
1 bottle sale rectifier tube square getter measurement value 50 (rejected value 40) The printing on the base part with white box is thought to be a reprint from the font and design, and the plate part from mica is very similar to that made by WE, but since the construction of the getter bracket is different, it was determined that it was not made by Western Electric ※The measured value indicates the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Single sale rectifier tube square getter code: 6326 American measured value 48 (rejected value 40) with white box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Sold per bottle mesh top mark top grid measurement value 68 (rejected value 44) with white box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube engraving JAN thermal triode tube top grid made in America, measured value 38/30 (rejected value 25), slightly less getters on one side, tea box included ※ pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: tea box
Single sale rectifier tube square getter code: 852 American measured value 50 (rejected value 40) with white box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
This is the second self-confident work by Franco Serbrin, who worked on famous machines by Sonas Faber. The afterglow of the sound is beautiful, and you can hear a sound rich in scale for its size. You can feel the warmth of the sound from the enclosure, which is made of solid walnut wood using the technique of marquetry. A network is mounted on a dedicated speaker stand, making it a virtually integrated structure. This is a high quality pair that I can recommend for both design and sound quality. There is a slight dull feeling of use, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.11.16 good sweep test
Accessories: manual, stand, spike, spike receiver
Main specifications: 2-way, 2-speaker equipped unit: tweeter/29mm silk dome type (Ragnar Lian design) woofer/150mm custom-made sliced paper cone type 4Ω efficiency 87dB frequency band 40Hz to 33kHz body/W190 x H360 x D360 mm 8 kg stand/H740 mm 8 kg
Line balance input board for DG-38/DG-28/DC-330/DC-300/DF-35 (Shota Sasaki)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: original box, manual
Main specifications: Compatible models: DC-330, DF-35, DG-38*Switch DC-300 and DG-28 to 48kHz
This is an ACUPHASE A/D converter board compatible with RCA inputs. High level input terminals, for unbalanced connections. The input signal is converted to a 24-bit resolution digital signal using the A/D converter on the board (Shota Sasaki)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: original box, manual
Main specifications: Compatible models DC-330, DF-35, DG-38. *When added to DC-330, internal sampling frequencies up to 96kHz are supported
Comes with original box and instructions. An item that absorbs counterelectromotive force and reduces speaker impedance fluctuations, particularly from the mid range to the high range. Faithful speaker driving is possible, and realistic sound with high resolution and rich musicality are reproduced. There are multiple small wounds (Sasaki Shota)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: manual, original box
Main specifications: The compatible impedance of the speaker is 10 ohms or less, and the maximum output of the amplifier is recommended to be 1 kW or less W100 x H47 x D117 mm, mass approx. 245 g/1 piece
Speaker cable 2.0m pair terminal unprocessed M.C. CS 122 HYBRID uses a parallel multiple stranded wire structure, making it a supple and easy to listen to Vandenhall cable. It feels good and has a mild texture. There are dark stains on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable 2.9 m pair A high quality cable with a Y lug terminal/untreated 7N/8N copper hybrid as the conductor. It is a cable that shows a high degree of perfection, such as the sharpness of the mid-high range, the low range with a three-dimensional effect, and the high overall density. It rubs against the sheath, and there is some dirt (Kojima Yosuke)
Accessories: none
The ECLIPSE TD508MK3 is uniquely designed to reproduce accurate sound. Although it is like a miniature garden, the sound field is vast, and it reproduces sounds as if they were being played right in front of you. There are some scratches on the exterior. Serial ZSC00044, ZRB00010 (Fujisawa Yukishi)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: instruction manual, original box, grill
Main specifications: 8 cm aperture full range playback frequency band 52 Hz to 27 kHz impedance 8 ohms W180 x H289 x D268 mm weight 3.5 kg
※Since it is cheap, it will be handed over as is. This speaker is recommended for those who can listen at a low volume with a small yet soft and thick sound quality. It is a speaker that stretches in the mid to high range and makes glossy vocals resonate. There are some scratches on the exterior. Serial 5076402183 (Fujisawa Yukishi)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: saran net
Main specifications: 6Ω 85dB W160 × H270 × D243 mm 2.9 kg
*Currently sold. Cost-effective SACD player. Equipped with a front USB terminal, it is also possible to play back MP3/WMA sound source files. The spacious, transparent sound quality allows you to relax and enjoy music. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.11.10 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord, original box
Main specifications: CD/SACD compatible with USB terminal, W435 x H128 x D329 mm 5.2 kg
A 30cm unit used as a mid-bass for the JBL4350. You can enjoy low frequencies with Alnico magnets, high efficiency, and hard edges with a sense of speed. Original corn. You can see a feeling of use such as appearance, dullness, paint peeling, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.11 Operation confirmed
Accessories: instruction manual, original box
Main specifications: 30cm cone woofer 8Ω 99dB recommended crossover 200Hz, 1.5kHz, depth 12.7 cm, weight 6.8 kg
An air-tight boost transformer that dramatically evolved the ATH-2A. Dramatic improvements in strength and texture have been achieved by reviewing the transformer's wire and winding method while keeping the excellent operability of the 3 input systems and impedance switching unchanged. Generally in good condition, but there are some scuffs on the top surface. Serial 30103 (Yamato Yuki)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: none
Main specifications: 3 input systems 2 ohms, 40 ohms, bypass switching W240 x H70 x D180 mm 2.8 kg
An XLR cable, a masterpiece that combines a 1.0m pair of 7N high-purity wires and 4 types of oxygen-free copper wires, the sound quality is dynamic, full of transparency, and is bright and stretchy, based on pure sound reproduction (Asaine Tomoho)
Maintenance information: 2024.11.16 Continuity confirmed
Accessories: none
The price has been reduced! 2024/4/18 sales price 500 yen*It's cheap because it deteriorates drastically! Audio-Technica record cleaner. Premium velvet can be used to clean records gently and effectively. It's also perfect for those just starting to arrange records. The exterior shows a feeling of use such as dullness, etc., and wear on the velvet (Asaine Tomoho)
Accessories: none
The price has been reduced! 2024/11/12 sales price 59,800 yen Maintained in 2020! Kenwood's L-01T is still popular! This is a dedicated FM tuner that uses a non-magnetic housing. It is a soft, enveloping sound that is characteristic of varicones. The luxurious construction aimed at excellent performance as a communication device and improved sound quality as an audio device is truly remarkable. The exterior is dull, small scratches, etc., and a feeling of use can be seen. Serial 30100028 (Fujisawa Yukishi)
Maintenance information: 2020.3.20 Maintained (dial guideline slider part cleaned. Meter back lamp replacement. RF selector switch port replacement. Detection coil internal capacitor replacement adjustment. RF tracking adjustment. Channel separation adjustment. Other operation checks, L6, L8, FL2 capacitor replacement, FE partial cleaning, PL lamp replacement, 21 overall electrical system adjustments)
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner reception frequency range 76MHz to 90MHz antenna impedance 75Ω unbalanced W440 × H136 × D452 mm 9.1 kg
Maintained by the manufacturer! 1650 series SACD/CD player It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. There are stains on the exterior and front panel, as well as dullness and a feeling of use. Serial 0101503568 (Kobayashi Hitoshi)
Maintenance information: 2024.11.9 Denon maintenance completed (CD traverse mechanism and loading belt replacement, cavity cleaning, inspection of other parts, operation sound test)
Accessories: remote control, instruction manual, power cord
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg