The FE103-Sol 10cm cone-shaped full range unit (8Ω) sold in limited quantities is mounted on the dedicated backroad horn speaker box BK103-Sol. By combining T12 MDF with the back plate, unnecessary vibrations are dissipated and the intensity distribution of the entire speaker box is optimized. This achieves sound quality with high clarity and rich sound. As for the exterior, the veneer is peeling off at the front corner, and there is a feeling of use such as small scratches. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.21 sound output confirmed
Accessories: none
Main specifications: 8 ohms 20 to 40 kHz 90 dB baffle opening dimensions: φ93 backroad horn type external dimensions 200 (W) x 874 (H) x 335 (D) mm (not including terminal) mass 8.7 kg
RCA digital cable 1.5m 1 only VIDEO BRILLIANCE series. This is a professional coaxial digital cable that is compatible with 1506A. It is originally a digital video cable, but since it is a high frequency cable, it can also be used as a digital audio cable. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: none
This headshell is designed to match the Orthophone MC-Q series cartridges. It is an easy-to-use headshell with a slightly heavy weight that is easy to combine with cartridges from other manufacturers. There is a screw scratch (Tomoho Asaine)
Maintenance information: 2024.6.23 sound output confirmed
Accessories: original box
Main specifications: machined aluminum body weight 15g
Comes with original box, good condition! Successor to the current Accuphase model, the A-47. Class A thickness and warmth like a vacuum tube are added to the neat and clean sound unique to Accuphase. The exterior is good with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.22 operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: pure A grade 45W+45W, bridge connection 180W (8Ω) damping factor 800 W 465 x H211 x D464 mm 33.0 kg
Comes with original box It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S uses a round needle, and it is a cartridge with a wide range added (Sasaki Shota)
Maintenance information: 2024.6.22 sound output operation confirmed
Accessories: original box, manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
Maintained by the manufacturer! A half-size SACD player with a full aluminum chassis and aluminum tray. Similar to the regular series, the D/A section is also equipped with AL24 processing. The supple sound is pleasant enough to listen to. He's an authentic player who doesn't make you feel the size (Kojima Yosuke)
Maintenance information: 2024.6.22 manufacturer maintained (SACD board, traverse mechanism, display tube, loading belt, screw replacement. (Inspection of each part and implementation of operation tests)
Accessories: power cable, remote control, RCA cable
Main specifications: SACD/CD player MP3/WMA file CD playable 1-bit DSD/16-bit linear PCM line output 1 system (RCA), 2 digital output systems (coaxial x 1, optical x 1) W300 x H80 x D310 mm 7 kg
Maintained. The Lux tubular premium FM/AM tuner WZ-30 was developed with the aim of being the ultimate FM stereo tuner. With the warm and thick sound quality typical of a tube ball, you can enjoy broadcasting in a relaxed atmosphere. There are small scratches and dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.6.22 maintained (relay unstable exchange, 100 μF x 2 defective replacement, electrolytic capacitor 100 μF, etc., 6 defective replacement, trimmer capacitor defective exchange, 2 germanium diode defects and deterioration exchanges, 5 W resistor replacement, vacuum tube 6U8 deterioration replacement, IF/RF/MPX readjustment* operation checked with other AC100V)
Main specifications: tubular FM/AM tuner W470 x H175 x D275 mm 10 kg
Comes with original box! Balance cable 1.5m pair is a long-selling model designed by Yorma, which can be said to be representative of high-end cables that are currently natural and have no habits. Uses 8N oxygen-free copper, which is purer than the current “No. 3” conductor. It is an SN cable with excellent fresh sound and excellent harmonic expression (Sasaki Shota)
Maintenance information: 2024.6.22 operation confirmed
Accessories: original box
The price has been drastically reduced. 2024/6/22 sales price 148,000 yen Maintained by Taiyo International! JEFF ROWLAND's compact power amplifier, MODEL 102, has arrived. Although it is small, the driving power is high enough with a 100W output. In combination with CAPRI, it shows maximum tonal appeal, and it is a powerful machine that is compatible with various pri even when used alone. Part 1 of the characters have disappeared on the exterior, and there are small scratches and bumps (Sasaki Shota)
Maintenance information: 2024.4.10 Maintained by the manufacturer (replaced due to lack of capacity of the electrolytic capacitor. (Left and right level and other characteristic tests and running tests are carried out)
Accessories: copy of manual, power cable
Main specifications: 100W+100W (8Ω) frequency characteristics 54-65kHz damping factor 1000 twin mono configuration machined aluminum block W348 x H68.5 x D190 mm 3.4 kg
Pair tube ambient heat beam tube made in America measured value 40/40 (rejected value 25) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube ambient heat beam tube made in America measured value 42/42 (rejected value 25) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube ambient heat beam tube made in America measured value 44/44 (rejected value 25) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
Choke transformer hammer tone color inductance 12H/200mA DC resistance 113 ohm W84 x H119 x D76 mm, approx. 2.4 kg, good appearance (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 400-360-100-360-400V/AC225mA 5V/3.3A 5V/3.3A 5-6.3V/3.3A 6.3-10V/3.3A W110 × H115 × D100 mm 6.5 kg with little feeling of use (Kojima Yosuke)
Accessories: none
XLR (male) to RCA (female) conversion adapter (No. 2 hot). The sound quality is fresh without feeling that the amount of information is missing. It looks like it's unopened, but there is a slight feeling of use. *There are models of CGA RCA/XLR that cannot be used with the XLR terminals installed in some audio products (please contact an authorized dealer for details).
Accessories: none
Unused item! (Opened to check continuity) Choke transformer inductance 5H/200mA DC resistance 73Ω (measured 72.4Ω) W79 x H72 x D78mm 1.2 kg (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Power transformer hammer tone color primary: 100V secondary: 320-280-0-70-280-320V/0.205A 6.3V/2A x 3 5V/3A W110 x H114 x D96 mm 3.8 kg with little feeling of use (Kojima Yosuke)
Accessories: none
Caldas XLR (male) to RCA (male) conversion plug. The contact surface is coated with rhodium plating. It's the 2nd hottest (Oikawa Tetsuji)
Accessories: none
XLR (male) to RCA (female) conversion adapter sold in pairs No. 2 Hot has a high level of fresh sound quality that suppresses loss of information volume (Oikawa Tetsuji)
Micro arm base Please note that the hole diameter specification is specific to the RMG212i. Does not fit other companies' arms. If you're looking for one, don't miss it. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: hole diameter 20 mm (actual measurement), weight 1.12 kg
Western CD line transformer using a repeat coil. Both balanced and unbalanced wiring are provided. By using it between the CD and the preamp, the sound changes to a thick sound that is easy to listen to. The exterior has dullness, abrasions, etc. (Fujisawa Yukishi)
Maintenance information: 2024.6.22 operation confirmed
Accessories: No accessories
Main specifications: W200 x H175 x D150 mm (actual measurement)
This is a self-made conversion transformer using Tamura's TN-347. Converts stereo input to mono input. If you prefer mono, please try it once. (FUJISAWA KOSHI)
Maintenance information: 2024.6.22 operation confirmed
Accessories: No accessories
Main specifications: W70 x H105 x D100 mm (actual measurement)
Maintained. Mono cartridge CA25D. It is a staple mono needle and one of the highest. The sound is precise, thick, and thick, and the sense of density unique to things that are different from stereo needles is attractive. The original amount of information on the mono disc is accurately reproduced. Serial 133037 (Fujisawa Yukishi)
Maintenance information: 2024.6.21 Maintained (damper replaced, finger screw installed)
Accessories: original box, needle cover
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
1 bottle only. Speaker cable, 2.1 m, terminal, unprocessed three-layer coaxial core wire, has a multi-directional twisting structure with good sound loss, yet has a well-balanced sound with a good sense of volume and texture. There is rubbing and dirt on the sheath (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
It is a component magnetizer that demagnetizes everything from the input to the output of your amplifier. It emits a 1 kHz wave tone and demagnetizes. The sound quality of the entire system can be expected to be improved with easy operation. Good enough that you don't feel a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.22 operation confirmed
Accessories: original box, instruction manual (English, Japanese)
The sound quality of the XLR male-XLR female cable 3.0 m gives the impression that it is solid and natural, and the impression is that it makes the most of the original material of the equipment. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag
The 1.5m sound quality of the Fischer-XLR male cable gives the impression that it is solid and natural, and the impression is that it makes the most of the original material of the equipment. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag
Although it was an unopened item, I only opened the outer box for a photo shoot. This is a solid turntable mat made of special metal. Resonance in the low frequencies is stopped, and deep low frequency reproduction such as sinking is possible. It can also be expected to play an active role as a countermeasure against howling (Kobayashi Hitoshi)
Accessories: instruction manual, original box, screwdriver, metal fittings
Main specifications: Diameter measured approx. 300 mm, dead weight approx. 870 g
The sound quality of the 2.0m XLR male to XLR female cable gives the impression that it is solid and natural, and the impression is that it makes the most of the original material of the equipment. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag
1 bottle only. Speaker cable, 3.9 m, terminal, unprocessed three-layer coaxial core wire, has a multi-directional twisting structure with good sound loss, yet has a well-balanced sound with a good sense of volume and texture. There is rubbing and dirt on the sheath (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
Beautiful item with original box! Late version of the representative model V15 with MM type cartridges. Compared to the previous model, the sense of range is wider, sharpness is increased, and the impression is clean. The needle tip is good (Tamai Jun)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: original box
Main specifications: output voltage 3.2 mV playback frequency 20 Hz to 20 kHz output impedance 815 ohms load resistance 47 kΩ needle pressure 1.5 to 1.75 g needle tip 0.15 x 3 mil micro ridge self weight 6.6 g
The RCA-XLR conversion cable 1.0m pair No. 2 hot plug is a reliable and proven Negrex commercial cable manufactured by Neutrik. Clear and honest sound quality (Mamoru Hatano)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Digital coaxial cable 3.0 m RCA specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The 1.5m pair No. 2 HOT terminal of the XLR-RCA cable is a standard BELDEN line cable that clearly outlines the REAN (NEUTRIK) terminal and has a firm thickness, especially in the mid to low range. There are marks and stains on the root part of the sheath (Jun Tamai)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
PSE standard product Power cable 1.0m PS AUDIO power cable with a reputation for quality. This model is particular about manufacturing methods, such as using custom-made plugs and applying high pressure welding with a hydraulic press to the contact point between the conductor and connector. The exterior is dull (Mamoru Hatano)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The 1.5m BNC digital cable uses a D.U.C.C. conductor made of 7N class high-purity copper, which is the purest in the world. Oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Tamai Jun)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The 1.5m pair terminals of the RCA cable are made by Neutrik. This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Digital cable 1.0 m In addition to wire materials using the unique aluminum/copper alloy “Alumlloy,” M.D.T. (Minimizd.Dleleotria.Teohnology) technology, which succeeded in making the cable film as thin as possible, was adopted. There is a feeling of use such as dirt on the sheath part (Asae Tomoho)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Sound transparency is greatly improved by adopting a coaxial single-core structure suitable for microwave transmission in the 1.5m pair gigahertz band of RCA cables in the cable. There is no coloring, and phase information can be obtained with accurate playback sound (Kojima Yosuke)
Accessories: original box
This is a model close to REFERENCE with a 1.25m RCA plug teflon air insulation shield on both ends of the 1.25m phono cable. It's a familiar Caldas sound with excellent thickness and energy. There are abrasions on the sheath and discoloration on the ground terminal (Kojima Yosuke)
Accessories: none
XLR (male) to RCA (female) conversion adapter (No. 2 hot). The sound quality is fresh without feeling that the amount of information is missing. It looks like it's unopened, but there is a slight feeling of use. *There are models of CGA RCA/XLR that cannot be used with the XLR terminals mounted on some audio products (Yoichi Murakoshi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
216mm pole (19mm diameter) set of 4 silver color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions, line scratches, and paint peeling in places (Murakoshi Yoichi)
Accessories: none
100mm pole (19mm diameter) set of 4 black color, please use it to add shelves or extend poles for Q4, Q4D, etc. (Murakoshi Yoichi)
Accessories: none
Key Specifications: 100mm length/19mm diameter optional pole
Set of 4 spike feet for 19mm diameter poles for Q4D and Q4 racks The sharpness unique to spikes with a good sense of resolution can be obtained. There are abrasions and dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 19 mm, length 78 mm ※ height adjustable up to 5 mm
Glass shelf for Q4D It can be rearranged with the Q4D shelf board you have. How about making it look elegant (Murakoshi Yoichi)
Accessories: none
Main specifications: external dimensions W600 x D475 mm weight 5.4 kg
Glass shelf for Q4D It can be rearranged with the Q4D shelf board you have. How about making it look elegant (Murakoshi Yoichi)
Accessories: none
Main specifications: external dimensions W600 x D475 mm weight 5.4 kg