Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
It smells like tobacco, so it's cheap. LP record static removal brush Upgraded model of the best-selling SK-2. It is rhodium plated to remove static electricity more quickly and reliably. Can also be used on CDs and DVDs
Accessories: nothing
Main specifications: brush specifications/tip = natural hair (black goat's beard) root = synthetic hair (acrylic fiber), thickness 46 denier, conductive fiber (copper sulfide chemically bonded to acrylic fiber) W60 x H170 x D30 mm 36 g
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
*The stylus is made by JICO. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The cantilever is slightly leaning to the left (Sasaki Shota)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: nothing
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The 1,2m pair of XLR cables, NBS OMEGA 4, which has a low distribution volume, is in stock. It is a gem that has gained popularity among JAZZ and ROCK fans for its thick, energetic sound quality. It still makes me feel that CP is high. The exterior is good (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original bag
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is dull over time, and there is a lot of feeling of use. Serial MZ02821280143 (Murakoshi Yoichi)
Maintenance information: 2024.6.14 maintenance (tray slide motor belt and CD standby motor belt, C replacement in CD servo)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
Built-in phono equalizer unit. Equipped with a high performance high gain equalizer. The internal dip switch allows switching between MM and MC, and the MC input impedance and subsonic filter can be set to ON and OFF.
Maintenance information: 2024.6.10 Operation confirmed
Accessories: none
Main specifications: Compatible models C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, etc. [MM type cartridge] gain 36 dB, input impedance 47 kΩ [MC type cartridge] gain 62 dB, input impedance 10/30/100 Ω switching E-550 E-350 E-450 C-2110
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Great sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Jun Tamai)
Accessories: none
Main specifications: size W440 x D490 mm x H58 mm weight 7.0 kg
A small but authentic pre-main amplifier with a built-in FM/AM tuner. Comes with PHONO input (MM/MC), so you can enjoy analog well. It's a perfect match for those who can't play very loudly or for second systems. There are no major noticeable scratches on the main body, but there is corrosion on the battery part of the remote control (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 75W+75W (8Ω) 150W+150W (4Ω) MC/MM compatible AM/FM tuner built-in W300 x H80 x D341 mm 5.5 kg
The price has been drastically reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been reduced. 2024/6/17 sales price 198,000 yen It is built in a form that satisfies modern recording requirements, such as a DSD 11.2 MHz USB-DAC, a phono amplifier compatible with MC cartridges, and balanced input. It is a playful preamp with warm sound by NuTube, which was jointly developed by KORG and Ise Electronics, and an audio driver equipped with “S.O.N.I.C. Remastering Technology” produced by Mr. Ono Seigen. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: original box, power cable
Main specifications: 2CH compatible format (USB) DSD 2.8224 MHz, 5.6448 MHz, 11.2896 MHz, 1 bit DSD3.072 MHz, 6.144 MHz, 12.288 MHz, 1 bit (only when using S.O.N.I.C. remastering technology) PCM44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz 352.8 kHz 384 kHz , 16 bit, 24 bit audio driver ASIO2.1, WDM, Core Audio (*no guarantee of operation of Windows other than Intel chips) external dimensions W432 x H93 x D282 mm 5.9 kg
An affordable Lax interconnect cable with attention to detail, such as each core structure that makes the hot and cold of the 1.0 m RCA cable transmission line the same, and a core wire wrapped in Japanese paper. It is characterized by its moderate thickness and good S/N. (YONEJIMA Satoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: No accessories
Digital cable (BNC) 1.0 m (measured less than 1.2 m) An impeccably luxurious cable that combines delicacy and heaviness in each band. Not only is it clear and voluminous, but all sounds such as vocals, drums, and horns spread to the front, up, down, left, and right, creating a realistic sound. The exterior has deflections on the sheath (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The 2.0m optical digital cable is probably a model that has not been sold in Japan. There is a slight stickiness on the sheath (Tamura Eiji)
Maintenance information: 2024.6.13 operation confirmed
Accessories: case
The price has been reduced. 2024/6/15 sales price 17,000 yen Krypton thin audio board. The original technology, heavyweight “iron ball sand,” has been adopted, which has a very large specific gravity to prevent electromagnetic noise from the device, and the mass is also heavy, making it possible to absorb external vibrations drastically due to the vibration of the iron ball. There is a feeling of use on the exterior such as dullness and line damage (Asaine Tomoho)
Accessories: none
Main specifications: W450 x H21 x D400 mm 5.2 kg
The price has been reduced. 2024/6/15 sales price 16,800 yen VM520EB model with head shell AT-HS10. Uses a bonded elliptical needle and aluminum pipe cantilever to reduce tracing distortion and extract accurate information. High frequency sensitivity and amount of information shine (Tomoho Asaine)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: original box head shell AT-HS10
Main specifications: VM type playback frequency range 20 to 23,000 Hz output voltage 4.5 mV (1 kHz, 5 cm/sec.) Channel separation 27 dB (1 kHz) output balance 1.5 dB (1 kHz) needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 2.7 kΩ (1 kHz) DC resistance 800 Ω load resistance 47 kΩ mass 16.8 g (6.4 g for VM520eB only)
The price has been reduced. 2024/6/16 sales price 378,000 yen A new-generation premain amplifier that integrates the performance of a reference separate amplifier into one housing. All stages are balanced from input to output. The smooth tone in the mid to high range is impressive, and it beautifully reproduces vocals, strings, etc. The bass also has a sufficient sense of volume, and the sense of scale is perfect. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) playback frequency band 5Hz to 50kHz input: PHONO (MM, MC) 1 system, 4 analog systems W440 x H168 x D453 mm 21.5 kg
The price has been reduced. 2024/6/16 sales price 298,000 yen The sound is enveloping, and there is sex appeal in the glossy mid-high range. It also excels at reproducing acoustic instruments, so you can enjoy vivid playback sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: rear bass reflex type frequency characteristics 28 Hz-22 kHz 91 dB 4 Ω crossover 110 Hz, 2,500 Hz W190 x H1085 x D400 mm 32.5 kg
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
Rhodium plated The PSE standard cable clamp part was changed from conventional resin clamps to special stainless steel, which is heavy and has excellent damping properties. This effective vibration countermeasure maximizes the potential of the device (Oikawa Tetsuji)
Accessories: none
It is inexpensive because it leaves a cigarette smell. A turntable seat with high vibration resistance made of porous ceramic. It is a porous ceramic with 45 micron pores in an alumina crystal, and can be expected to have high vibration resistance (Sasaki Shota)
Accessories: none
Main specifications: 303 mm in diameter, 7 mm in thickness, 1.2 kg in weight
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
It is inexpensive because it leaves a cigarette smell. This is a carbon record mat. The fine vibrations transmitted from the turntable are reduced, the sense of silence is increased, and the sense of sound image is improved (Sasaki Shota)
Accessories: none
Main specifications: diameter approx. 295 mm, thickness 4 mm
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. remote control, internal cleaning, general adjustment)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
Maintained! Adjustable 3-way channel divider Crossover frequencies for LOW/MID 4 and MID/HIGH 4 stages can be selected. Furthermore, it is equipped with a FLAT position. It is possible to switch between 200/400/570/800 Hz and 2500/3500/5000/7000 Hz. There are small scratches and corrosion on the exterior. Serial 141628 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (replacement of deteriorated capacitors in the circuit. Power circuit transistor replacement. Switch and volume contacts corrected. I/O pin jack polish (This is a specification because each switch only makes a low sound when FLAT)
Accessories: No accessories
Main specifications: W408 x H134 x D280 mm weight 5.4 kg
Please note that since the CSE power cable is a 2.0m power control terminal for outlet taps, it cannot be used with normal devices. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.16 continuity confirmed
Accessories: original box
It has been replaced with a cloth edge. Currently sold. Onkyo's 3-way bookshelf speaker The stretchiness of the mid-high range, which is typical of Onkyo, makes me feel comfortable listening to vocals. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 sound output confirmed (replaced with cloth edge)
Accessories: saran net
Main specifications: 3-way bass reflex 6Ω 91 dB W380 x H670 x D363 mm 34 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. The exterior is generally good (Hiroki Aso)
Accessories: original box
By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Hiroki Aso)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
※The spikes are out of stock, so it's cheap. It is an audio isolation board that combines soft materials and hard materials to absorb unnecessary vibrations (resonances). The flat full-band characteristics improve the resolution of all bands and faithfully express subtle sound nuances. There is a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W500 x D450 x H20 mm with 5 cone spike mounting holes on the back.
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W375 x H60 x D475 mm weight 6.0 kg (actual measurement)
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use, such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W210 x H58 x D297 mm weight 2.2 kg (actual measurement)
※1 sheet only. Perfect for column-type tall boy speakers or bookshelf speakers placed on a stand. Even though the whole thing adheres closely to the floor, the angled edge allows it to spread throughout the room without stopping the sound with the board (Asaine Satoshi Law)
Accessories: none
Main specifications: laminated bamboo, 3 layers, size W330 x H20 x D 380 mm, weight 1.4 kg
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
A long-selling model equipped with a USB-A terminal. Compared to other models in the same class, it is popular for its slightly thicker sound that is pleasant to listen to. Music files can be played directly by connecting to an iPod/iPhone, WMA, MP3, or a USB memory with recorded files. There is a feeling of use such as slight dullness and small scratches. Serial 4106605687 (Jun Tamai)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: Remote control instruction manual copy
Main specifications: size W 434 mm x H107 mm x D 273 mm weight 4.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 298,000 yen A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg