The price was significantly reduced. 2021/9/1 selling price 10,000 yen* It is cheap because it is processed into a hole in the base. Arm base for micro 1500/5000/8000 series. It is a robust build-in. The appearance has dullness and scratches. (Kimiya Miura)
Accessories: No accessories
Main Specifications: Brass Arm Base Compatible Arm: Micro MA-505X/505S/707X, EMT 929, ortofon RS-212/RMG-212/SMG-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C,
denon DA-303/305/307/309/401, FR fr-54/24Mk2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/ 840FB/940/945S etc
A simple test has been completed on the SH-8000, but since it is inexpensive, it will be handed over as is. Sound field measurement microphone that can be used with the Technics analyzer SH8000. The tip of the cord is a 2P phone jack. You can use it with your own analyzer etc. (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple check completed
Accessories: stand, original box
Main specifications: Back electret capacitor type omnidirectional for sound field measurement
It is an analyzer that can measure the listening room environment and speakers. Measurements can be performed in the 20 Hz to 20 kHz band. It is also battery-operated, compact, and easy to use. The exterior is dull, and there is a feeling of use such as scratches. Serial MC5J21B003 (Jun Tamai)
Maintenance information: 2024.3.18 simple check OK
Accessories: original box microphone
Main specifications: oscillation signal wobble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9V battery (S-006P x 1) microphone: back electret condenser type omnidirectional frequency characteristics 20 Hz to 20 kHz power supply 1.5V (SUM-3 x 1) W430 x H53 x D158 mm 1.0 kg
It is an analyzer that can measure the listening room environment and speakers. It can be measured in the 20Hz to 20kHz band. It is also attractive because it is battery-operated and compact, and easy to use. The appearance is dull. Serial MF3K17B055 (Eiji Tamura)
Maintenance information: 2022.2.4 operation confirmed (There is a gully on the frequency switching knob, but it is the current situation.)
Accessories: original box, instruction manual, connection cable, microphone
Main specifications: oscillation signal warble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9V battery (S-006P × 1) microphone type back elect Let Capacitor Type Directional Characteristics Omnidirectional Frequency Characteristics 20Hz to 20kHz Power Supply 1.5V (SUM-3×1) W430×H53×D158mm 1.0kg
A simple test has been completed, but since it is inexpensive, it will be handed over as is. It is an analyzer that can measure the listening room environment and speakers. Measurements can be made in the 20Hz to 20kHz band. It is battery-operated and compact, and easy to use is also attractive. On the exterior, there is a slight feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple operation confirmed
Accessories: original box, instruction manual (copy)
Main specifications: oscillation signal wobble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9 V battery (S-006P x 1) microphone type back electret condenser type directional characteristics omnidirectional frequency characteristics 20 Hz to 20 kHz power supply 1.5 V (SUM-3 × 1) W430 x H53 x D158 mm 1.0 kg
It is an analyzer that can measure the listening room environment and speakers. Measurements can be made in the 20Hz to 20kHz band. It is also attractive because it is battery-operated, compact, and easy to use. The exterior has a feeling of use such as dullness. Serial MF6324B092 (Asane Tomonori)
Maintenance Information: 2022.11.12 Operation confirmed
Accessories: instruction manual original box
Main Specifications: Oscillation Signal Wobble Tone (Modulation Frequency 8 Hz) Oscillation Frequency 20 to 20 kHz (Measurement Point 31) Power Source 9V Battery (S-006P x 1) Microphone Type Back Electret Condenser Type Directional Characteristics Omnidirectional Frequency Characteristics 20Hz to 20kHz Power Supply 1.5V (SUM-3 x 1) W430 × H53 × D158mm 1.0kg
It is an analyzer that can measure the listening room environment and speakers. It can be measured in the 20Hz to 20kHz band. It is also attractive because it is battery-operated, compact and easy to use. The appearance has a feeling of use such as dullness. Serial AK2630A078 (Asaine Tomoho)
Maintenance information: 2022.5.26 Operation confirmed (There is a gully in the frequency switching knob, but it is the current situation.)
Accessories: Instruction manual microphone microphone stand original box
Main specifications: Oscillation signal warble tone (modulation frequency 8 Hz) Oscillation frequency 20 to 20 kHz (measurement point 31) Power supply 9V battery (S-006P × 1) Microphone type back elect Let Capacitor Type Directional Characteristic Omnidirectional Frequency Characteristic 20Hz to 20kHz Power Supply 1.5V (SUM-3 × 1) W430×H53×D158mm 1.0kg
The price has been reduced. 2022/4/18 sales price 15,000 yen This is a red granite board with a mirror front finish, custom-made for the MICRO SX-8000. It is hard and has good vibration damping properties, and is recommended as a base for audio systems. As for the exterior, there is linear dirt on the back. (Mizusaki Ryo)
Accessories: none
Main specifications: W900 x H12 x D600 mm, weight 30.0 kg (actual measurement)
Genuine arm base for SME 3009/3010 that can be mounted on the MICRO 1000, 1500, 3000, 5000, 8000 series has dullness and abrasions (Kojima Yosuke)
Accessories: none
Main specifications: W50 x H20 x D136 mm approx. 210 g
Arm base for micro/SX-8000/5000/3000/1500 series by VYOYO in Osaka Compatible with SME long arm (3012/3012R) No arm mounting screws, there is rust on the shaft mounting screw, some dullness (Yoichi Murakoshi)
Accessories: None
Main specifications: Weight 1kg (actual measurement)
This arm base can be used for the 1500/5000/8000 series of micro It's built in robust. Appearance has dullness, threads and scratches (Yoichi Murakoshi)
Accessories: original box, instruction manual
Main Specifications: Brass Arm Base Compatible Arm: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C,
denon DA-303/305/307/309/401, FR FR-54/24mK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/ 840FB/940/945S etc
DENON's classic MC cartridge The sense of localization is also well balanced, so all genres sound stably. It is a cartridge that can be widely recommended from analog introductory to geners. Cereal 3375 (Tomobo Asaine)
Maintenance Information: 2021.5.14 Operation Confirmed (Sweep Test Good)
Accessories: needle cover
Main Specifications: MC type output voltage 0.3mV playback frequency 20Hz to 45kHz Electrical impedance 40Ω needle tip 16.5 micron Round needle pressure 2.2 to 2.8 g Self weight 8.5g
※The arm holes have been machined. According to actual measurements, the hole diameter was 210 mm. Arm base for MICRO record players SX-8000, RX-5000, RX-3000, 1500 series, and DQX-1000. It is a model painted matte black on brass (Fujisawa Yukishi)
Accessories: none
Main specifications: W80 x H20 x D140 mm, weight 1.2 kg, arm mounting hole diameter 210 mm, hole pitch (between centers) 4.3 mm (actual measurement)
The price has been reduced! 2022/6/4 Sales price 20,000 yen unknown Arm base for micro. An AX-6G type arm base that can be used with the AX series (for SX-8000, RX-5000, RX-3000, 1500 series, DOX-1000). It is made smaller than the normal arm mounting diameter, and it seems that it is probably for ortofon (inner diameter 21mm) The appearance is dull (Satoshi Yonejima)
Accessories: No accessories
Main specifications: 1.6kg
It is an arm base that can be used for the 1500/5000/8000 series of micro. It is built in sturdy. (Fujisawa Yukishi)
Main Specifications: Brass Arm Base Compatible Arms: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24MK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/840FB/940/945S, etc.
It is an arm base that can be used for the 1500/5000/8000 series of micro. It is built in sturdy. (Fujisawa Yukishi)
Main Specifications: Brass Arm Base Compatible Arms: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24MK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/840FB/940/945S, etc.