Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- Good level! A record player system with Ikeda's long-arm IT-407 attached to the SX-1500 superlative armless model with air floating+vacuum. The heavyweight turntable rotates while levitating 0.03 mm with the same floating structure as the SX-8000 /2. The vacuum function also works well. There is no mechanical noise, and the precision, which can be said to be the finished form of an analog player, is attractive (Murakoshi Yoichi) Maintenance information: 2024.5.8 sound output confirmed Accessories: strobe, instruction manual, EP adapter, thread, platter handle, arm original box, 2 shaft fixing columns, hex wrench Main specifications: IT-407: total length 388 mm effective length 307 mm mounting hole diameter 31 mm cartridge shell balance range 6 g to 38.5 g arm base: AX-6G SX-1500FVG: 33, 45 rotation base frame RB-1500 · W330 x H85 x D330 mm motor unit RY-1500D · W180 x H130 x D315 mm air pump RP-1110 · W200 x H210 x D350 mm Total weight 44.7 kg
- description
- The disposal price has been reduced! Member prices are not applicable. 2024/3/14 sale price 138,000 yen one-owner item! MICRO exclusive SAEC arm WE-407/TM The feature is that the execution length is longer to match the MICRO record player. Equipped with a double knife edge with excellent work accuracy and high adaptability, it is an arm that is still valuable as a first-class product. From low-compliance heavyweight cartridges to high-compliance light needle pressure cartridges, it is a talented gem that brings out the capabilities of many cartridges. The exterior is in good condition with no conspicuous scratches (Mizusaki Ryo) Maintenance information: 2024.3.14 continuity confirmed Accessories: instruction manual, shell, phono cable (6NX/TSW1010) Main specifications: double knife edge, static balance type, execution length 236 mm, total length 322 mm, overhang 15 mm, cartridge usage range 14-22 g/needle pressure 0 to 2.5 g (including shell), mounting hole 30 mm
- description
- A record player with an excellent sense of stability developed by condensing the high inertia concept realized with the SX-8000 /2 into a compact integrated player. The SME 3010R is mounted to achieve strong, thick, and outstanding analog sound with cuts. The overwhelming performance that brings out the full amount of information on a vinyl record is attractive. The exterior has dullness and small scratches. Serial 09040193 (Yonejima Satoshi) Maintenance information: 2024.3.23 Maintained (servo board pitch volume center adjustment. Power circuit electrolytic capacitor replacement. Arm weight O-ring replacement. Weight adjustment screw part cleaning. Turntable fixing screw installation rotation, arm operation, voice check) Accessories: power supply unit, handle, instruction manual, power cord Main specifications: [AP-M1] belt drive system, 8-pole hysteresis, synchronous motor, CR oscillator, BTL amplifier drive, 33 1/3, 45 rpm switching, ± 4% fine-adjustable size: W463 x H165 x D377 mm weight: 28 kg [3010R] short arm static balance type effective length: 237 mm cartridge mounting weight range: 1.5 to 26 g (cartridge only) 9.5 to 34 g (shell) Including) Variable needle pressure range: 0 to 5 g Slide base: ± 12.7 mm
- description
- It is an analyzer that can measure the listening room environment and speakers. Measurements can be performed in the 20 Hz to 20 kHz band. It is also battery-operated, compact, and easy to use. The exterior is dull, and there is a feeling of use such as scratches. Serial MC5J21B003 (Jun Tamai) Maintenance information: 2024.3.18 simple check OK Accessories: original box microphone Main specifications: oscillation signal wobble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9V battery (S-006P x 1) microphone: back electret condenser type omnidirectional frequency characteristics 20 Hz to 20 kHz power supply 1.5V (SUM-3 x 1) W430 x H53 x D158 mm 1.0 kg
- description
- ※Heavy weight FR W-250 only! Maintained! A record player with an excellent sense of stability developed by condensing the high inertia concept realized with the SX-8,000/2 into an integrated compact player, and also based on the design concept of thoroughly suppressing vibrations in the CD-M2, the first micro CD player. Equipped with a high-precision tone arm FR-64FX, it is a well-balanced combination. The exterior has a feeling of use such as dullness (Tomoho Asaine) Maintenance information: 2024.2.17 Maintained (bridge D short in power supply, power IC replacement, rubber belt replacement, rotation check in AMP, fuse broken motor) Accessories: Power supply stabilizer phono cable weight FR W-250 ※ normal weight is not included Main specifications: (AP-M1) belt drive system, 8-pole hysteresis, synchronous motor, CR oscillator, BTL amplifier drive, 33 1/3, 45 rpm switching, ± 4% fine adjustable size W463 x H165 x D377 mm weight 28 kg (FR-64FX) Dynamic Balance Type Short Type Needle Pressure 0-5g Compatible Cartridge 16g to 35g
- description
- This is a special rack for micro players. It is a combination of the F-8000 leg frame and the B-8000, which combines a glass board (G-8000) and a wooden board. Perfect for stabilizing larger record players. There are many stains, scratches, and stains on the exterior. ※Shipping costs will be estimated separately (Takimoto Yutaka) Accessories: none Main specifications: external dimensions W900xH485xD580mm upper glass surface dimensions W860xD540mm lower storage W800xH350xD500 mm 48.3 kg (actual measurement)
- description
- An air bearing and vacuum record player. The arm is equipped with AUDIO CRAFT AC-3000 Silver. Outstanding quietness and high resolution are achieved with the air bearing system+belt drive cultivated in the SX-8000. It's a famous machine that combines the passion for analog playback and precise technology into an elegant design, and you can feel the style of a micro. The exterior is dull overall (Oikawa Tetsuji) Maintenance information: 2023.12.14 maintenance completed (deteriorated capacitors on each board, semi-fixed resistors replaced. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly, cleaning and lubrication. Motor disassembly and cleaning, internal rotor cleaning, and assembly after lubrication. Arm disassembly, silicone oil removal, exterior cleaning. After the main unit was assembled, rotation speed was adjusted, needle pressure was checked, each rotation speed was confirmed, sound output test, and comprehensive operation confirmation were carried out) Accessories: RP-1100, handle, optional weight Main specifications: belt drive, 33/45 rotation, gunmetal, 31 cm turntable, air bearing type, adsorption turntable, W555 x H250 x D440 mm, 46 kg, RP-1100, W200 x H205 x D350 mm, approx. 6.8 kg
- description
- High speed inertia for SX-8000 It brings an even greater sense of stability to the micro gunmetal turntable. There is overall dullness (Oikawa Tetsuji) Accessories: none Main specifications: high speed inertia unit (inertial aid) zinc weight frame weight 9.3 kg
Manufacture:MICRO
Price: JPY 452,727 Sold Out
- description
- ※It is inexpensive because the motor unit is out of stock and the pump unit has deteriorated. A separate pump is included. This is a set of turntable unit (SX-8000) and pump unit (RP-8020). The airflow of the RP-8020 is weak and needs to be repaired. If you use the included pump, it floats and rotates smoothly without problems. An air bearing type super grade analog player. It lets you listen to extremely pure analog sound where the main body and motor are solidified in a heavy housing to thoroughly suppress unnecessary resonances. There are many wounds Maintenance information: 2023.10.15 Operation confirmed (using the included pump, air bearing OK) Accessories: pump, tools Main specifications: SX-8000/W312 × H140 × D312 mm 54 kg air pump unit RP-8020/W150 × D230 × H90 mm 6.1 kg
Manufacture:不明
Price: JPY 9,091 Sold Out
- description
- The price has been reduced. 2022/4/18 sales price 15,000 yen This is a red granite board with a mirror front finish, custom-made for the MICRO SX-8000. It is hard and has good vibration damping properties, and is recommended as a base for audio systems. As for the exterior, there is linear dirt on the back. (Mizusaki Ryo) Accessories: none Main specifications: W900 x H12 x D600 mm, weight 30.0 kg (actual measurement)
- description
- ※The arm holes have been machined. According to actual measurements, the hole diameter was 210 mm. Arm base for MICRO record players SX-8000, RX-5000, RX-3000, 1500 series, and DQX-1000. It is a model painted matte black on brass (Fujisawa Yukishi) Accessories: none Main specifications: W80 x H20 x D140 mm, weight 1.2 kg, arm mounting hole diameter 210 mm, hole pitch (between centers) 4.3 mm (actual measurement)
- description
- A simple test has been completed, but since it is inexpensive, it will be handed over as is. It is an analyzer that can measure the listening room environment and speakers. Measurements can be made in the 20Hz to 20kHz band. It is battery-operated and compact, and easy to use is also attractive. On the exterior, there is a slight feeling of use such as dullness (Murakoshi Yoichi) Maintenance information: 2023.5.30 simple operation confirmed Accessories: original box, instruction manual (copy) Main specifications: oscillation signal wobble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9 V battery (S-006P x 1) microphone type back electret condenser type directional characteristics omnidirectional frequency characteristics 20 Hz to 20 kHz power supply 1.5 V (SUM-3 × 1) W430 x H53 x D158 mm 1.0 kg
- description
- A simple test has been completed on the SH-8000, but since it is inexpensive, it will be handed over as is. Sound field measurement microphone that can be used with the Technics analyzer SH8000. The tip of the cord is a 2P phone jack. You can use it with your own analyzer etc. (Murakoshi Yoichi) Maintenance information: 2023.5.30 simple check completed Accessories: stand, original box Main specifications: Back electret capacitor type omnidirectional for sound field measurement
- description
- Genuine arm base for SME 3009/3010 that can be mounted on the MICRO 1000, 1500, 3000, 5000, 8000 series has dullness and abrasions (Kojima Yosuke) Accessories: none Main specifications: W50 x H20 x D136 mm approx. 210 g
- description
- Genuine arm base that can be mounted on MICRO 1000, 1500, 3000, 5000, 8000 series*See main specifications for compatible arms There are dents and abrasions (Kojima Yosuke) Accessories: none Main specifications: Compatible arms MICRO/MA-505 LX 505 L2, AUDIO CRAFT/AC-400C 400A 400 MK2, DENON/DA-302 304 308, EMT/997, GRACE/G-565F 860F 860F 860F 860FB 960, SAEC/WE-308L, ORTOFON/RMG-309 RF-297, etc. Usable range 200 to 309 mm (from the center of the turntable) (Up to the center of the rotation axis of the arm) W50 x H20 x D180 mm own weight 375 g
- description
- An arm base compatible with the SME 3009, 3010R, etc. compatible with the micro 1500/3000/5000/8000 series. There is dullness and dirt (Tamura Eiji) Accessories: original box Main Specifications: Brass arm base Compatible tone arm: SME 3009S2/3009S3 1.12 kg
STEREO SOUND NO.016 1970 AUTUMN/ステレオサウンド 16号
This item has been sold.You can't purchase now.
20-90002-28000-60
Price: JPY 4,091 Sold Out
雑誌・書籍1000円以上で送料無料
- description
- It is an analyzer that can measure the listening room environment and speakers. Measurements can be made in the 20Hz to 20kHz band. It is also attractive because it is battery-operated, compact, and easy to use. The exterior has a feeling of use such as dullness. Serial MF6324B092 (Asane Tomonori) Maintenance Information: 2022.11.12 Operation confirmed Accessories: instruction manual original box Main Specifications: Oscillation Signal Wobble Tone (Modulation Frequency 8 Hz) Oscillation Frequency 20 to 20 kHz (Measurement Point 31) Power Source 9V Battery (S-006P x 1) Microphone Type Back Electret Condenser Type Directional Characteristics Omnidirectional Frequency Characteristics 20Hz to 20kHz Power Supply 1.5V (SUM-3 x 1) W430 × H53 × D158mm 1.0kg
Manufacture:不明
Price: JPY 16,364 Sold Out
- description
- The price has been reduced! 2022/6/4 Sales price 20,000 yen unknown Arm base for micro. An AX-6G type arm base that can be used with the AX series (for SX-8000, RX-5000, RX-3000, 1500 series, DOX-1000). It is made smaller than the normal arm mounting diameter, and it seems that it is probably for ortofon (inner diameter 21mm) The appearance is dull (Satoshi Yonejima) Accessories: No accessories Main specifications: 1.6kg
- description
- It is an analyzer that can measure the listening room environment and speakers. It can be measured in the 20Hz to 20kHz band. It is also attractive because it is battery-operated, compact and easy to use. The appearance has a feeling of use such as dullness. Serial AK2630A078 (Asaine Tomoho) Maintenance information: 2022.5.26 Operation confirmed (There is a gully in the frequency switching knob, but it is the current situation.) Accessories: Instruction manual microphone microphone stand original box Main specifications: Oscillation signal warble tone (modulation frequency 8 Hz) Oscillation frequency 20 to 20 kHz (measurement point 31) Power supply 9V battery (S-006P × 1) Microphone type back elect Let Capacitor Type Directional Characteristic Omnidirectional Frequency Characteristic 20Hz to 20kHz Power Supply 1.5V (SUM-3 × 1) W430×H53×D158mm 1.0kg
- description
- The disposal price has been reduced! (Not eligible for discount for members) 2021/12/16 Sales price 198000 yen Replacing coupling capacitors, electrolytic capacitors, etc., completely disassembling volumes, selectors, etc., and repolishing contacts thoroughly It's refreshed! As for DENON's rare vacuum tube preamps at the time, it used plenty of high-grade volumes and transformers, etc., and the goodness of building that seems to be a domestic product is attractive. It plays a polite and glossy sound. There are mainly discoloration and scratches on the top plate (Fujisawa Yukishi) Maintenance information: 2021.12.16 Maintained (vacuum tube, coupling capacitor, semi-fixed resistor, electrolytic capacitor, rectifier diode, micro switch, vacuum tube socket, relay replacement. SW/VOL complete decomposition contact polishing, oxidation and sulfide prevention grease applied. (Circuit adjustment, input/output waveform confirmation, sound output test) Accessories: Copy of instruction manual Main specifications: Tube type control amplifier PHONO2 system (MM) used vacuum tube 6DJ8/ECC88 × 4, 6AU6 × 2, 12AX7/ECC83 × 2 W410 × H152 × D271 mm 8.5 kg
- description
- It is an arm base that can be used for the 1500/5000/8000 series of micro. It is built in sturdy. (Fujisawa Yukishi) Main Specifications: Brass Arm Base Compatible Arms: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24MK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/840FB/940/945S, etc.
- description
- It is an arm base that can be used for the 1500/5000/8000 series of micro. It is built in sturdy. (Fujisawa Yukishi) Main Specifications: Brass Arm Base Compatible Arms: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24MK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/840FB/940/945S, etc.
- description
- It is an analyzer that can measure the listening room environment and speakers. It can be measured in the 20Hz to 20kHz band. It is also attractive because it is battery-operated and compact, and easy to use. The appearance is dull. Serial MF3K17B055 (Eiji Tamura) Maintenance information: 2022.2.4 operation confirmed (There is a gully on the frequency switching knob, but it is the current situation.) Accessories: original box, instruction manual, connection cable, microphone Main specifications: oscillation signal warble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9V battery (S-006P × 1) microphone type back elect Let Capacitor Type Directional Characteristics Omnidirectional Frequency Characteristics 20Hz to 20kHz Power Supply 1.5V (SUM-3×1) W430×H53×D158mm 1.0kg
- description
- This arm base can be used for Micro 1500/5000/8000 series. It is a robust build. Appearance has dullness and scratches. (Satoshi Yonejima) Accessories: No accessories Main Specifications: Brass Arm Base Compatible Arm: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24mk2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/ 840FB/940/945S etc.
Manufacture:MICRO
Price: JPY 36,364 Sold Out
- description
- Comes with screws Rare SX-8000 blue color Base for SME Long Arm (3012/3012R) Compatible with Micro/SX-8000/5000/3000/1500 series (Oikawa Tetsuji) Accessories: screws Main specifications: Weight approx. 1,000 g
- description
- Rare SX-8000 blue color For Audio-Technica AT-1503/2, 1503/3, FR FR-64, 64S, 64B, 64FX (Tetsuji Oikawa) Accessories: None Main specifications: 873g
- description
- Rare SX-8000 blue color This arm base can be used for Micro 1500/5000/8000 series. It is a robust build (Tetsuji Oikawa) Accessories: None Main Specifications: Brass Arm Base Compatible Arm: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-212, Audio-Technica AT-1005-2, Audio Craft AC-300C, DENON DA-303/305/307/309/401, FR FR-54/24mk2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/ 840FB/940/945S etc.
- description
- Rare SX-8000 blue color Base for SME Long Arm (3012/3012R) Compatible with Micro/SX-8000/5000/3000/1500 series (Oikawa Tetsuji) Accessories: None Main specifications: Weight approx. 1,000 g
- description
- Base for SME Long Arm (3012/3012R) Compatible with Micro/SX-8000/5000/3000/1500 Series The appearance is kusumi and dirt. (Satoshi Yonejima) Accessories: No accessories Main specifications: Weight approx. 1,000 g
- description
- Beauty goods! High speed inertia for SX-8000 Bring even more stability to your micro gunmetal turntable. Serial 01070281 (Koshihama Yasuto) Maintenance information: 2021.11.21 over-the-counter operation confirmed (without height adjustment sticking. (Spinning is sleeky) Accessories: original box Main specifications: High-speed inertia unit (inertial aid device) Zinc weight frame weight 9.3kg
- description
- It's been a long time in stock! A super-grade analog player with air bearing method that Japan is proud of. The body and motor part are solidified in a heavy housing, and unnecessary resonance is thoroughly pressed, allowing you to listen to an extremely pure analog sound. Appearance has line scratches and paint peeling on the body of the motor and pump (Shota Sasaki) Maintenance information: 2021.11.20 operation confirmed Accessories: thread Main specifications: SX-8000/RY-5500/RP-8020 Air bearing system 33/45 rotation compatible stainless steel 20kg turntable SX-8000/W312 × H140 × D312mm 54kg Air Pump Unit RP-8020/W150 × D230 × H90mm 6.1kg
- description
- Arm base for micro 1500/3000/5000/8000 series compatible with SME 3009, 3010R, etc. There are some kusumi. (Yoichi Murakoshi) Accessories: Mounting screws Main specifications: brass arm base compatible tone arm: SME 3009S2/3009S3 1,12kg
- description
- SX-1500 top armless model with air floating+vacuum. The heavyweight turntable is rotated with the same floating structure as the SX-8000/2 with 0.03mm floating state. The vacuum function also works well. There is no mechanical noise, and the precision that can be said to be the finished form of an analog player is attractive (Hirotsugu Kondo) Maintenance information: 2021.10.25 operation confirmed Accessories: copy of instruction manual, belt, vacuum unit Main specifications: 33, 45 rotation base frame RB-1500 · W330 × H85 × D330mm Motor unit RY-1500D · W180 × H130×D315mm Air pump RP-1110 W200 × H210 × D350mm Total weight 44.7 kg
- description
- High Speed Inertia for SX-8000 Brings even more stability to the micro gunmetal turntable. The appearance has a feeling of use such as scratches and abrasions, and other kusumi. Serial 0106266 (Yuki Yamato) Maintenance information: 2021.10.7 operation confirmed Accessories: none Main specifications: High-speed inertia unit (inertia auxiliary device) Zinc weight Frame weight 9.3kg
- description
- We have drastically reduced the price! 2021/10/2 Selling price 698,000 yen SX-1500 superlative model with air floating+vacuum, which will be in stock for the first time in about 3 years! armless The heavyweight turntable is rotated with the same floating structure as the SX-8000/2 with 0.03mm floating state. The vacuum function also makes the LP stick well and firmly. There is no mechanical noise, and the precision that can be said to be the finished form of an analog player is attractive. There are some stains and scratches on the appearance. Also, some felt is pasted on it. Serial 02090030 (Kimiya Miura) Maintenance information: 2021.10.2 Operation confirmed (33 · 45 revolutions OK, float and adsorption confirmed) Accessories: copy of instruction manual, belt, EP adapter, carrying handle, locking screw Main specifications: 33/45 rotation base frame RB-1500/W330×H85×D330mm Motor unit RY-1500D/W180×H130×D315mm Air pump RP-1110 /W200 × H210 × D350mm Total weight 44.7 kg
- description
- The price was significantly reduced. 2021/9/1 selling price 10,000 yen* It is cheap because it is processed into a hole in the base. Arm base for micro 1500/5000/8000 series. It is a robust build-in. The appearance has dullness and scratches. (Kimiya Miura) Accessories: No accessories Main Specifications: Brass Arm Base Compatible Arm: Micro MA-505X/505S/707X, EMT 929, ortofon RS-212/RMG-212/SMG-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, denon DA-303/305/307/309/401, FR fr-54/24Mk2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/ 840FB/940/945S etc
- description
- DENON's classic MC cartridge The sense of localization is also well balanced, so all genres sound stably. It is a cartridge that can be widely recommended from analog introductory to geners. Cereal 3375 (Tomobo Asaine) Maintenance Information: 2021.5.14 Operation Confirmed (Sweep Test Good) Accessories: needle cover Main Specifications: MC type output voltage 0.3mV playback frequency 20Hz to 45kHz Electrical impedance 40Ω needle tip 16.5 micron Round needle pressure 2.2 to 2.8 g Self weight 8.5g
- description
- MICRO Premium Analog Player Floating vacuum mechanism Stainless steel turn-table BA-600 with air base Comes with arm base for SME short A tremendous sense of serenity and stability brought by enormous inertial energy. King of heavyweight rigid players Strong adsorption, smooth rotation of air bearing. Appearance, there are noticeable scratches and goggy on the paint peeling and pump. Serial 01110141 (Satoshi Yonejima) Maintenance information: 2021.5.6 Operation confirmed 2011.7.29 Maintenance (disassembly cleaning for clogging of the main body base vent, capacitor degradation replacement of motor power unit, turn (Replacement of rubber for adsorption of table, modified by pin embedding for broken pin of motor cover, motor disassembly cleaning lubrication, motor switch contact cleaning, operation inspection, rotation speed inspection) Accessories: instruction manual, transport screw for unit Main Specifications: SX-8000/2: Turntable with Air Bearing Type Record Adsorption Device Stainless Steel 28kg Moment of Inertia 3500kg Square cm Frame Zinc 35kg Total Weight 63 kg Dimensions W312 × H156 × D312mm RY-5500/2: Dimensions W180 × H136 × D312 mm Weight 14kg BA-600: Dimensions W00 × H82 × D400 mm Weight 50kg
- description
- Arm base for micro/SX-8000/5000/3000/1500 series by VYOYO in Osaka Compatible with SME long arm (3012/3012R) No arm mounting screws, there is rust on the shaft mounting screw, some dullness (Yoichi Murakoshi) Accessories: None Main specifications: Weight 1kg (actual measurement)
- description
- This arm base can be used for the 1500/5000/8000 series of micro It's built in robust. Appearance has dullness, threads and scratches (Yoichi Murakoshi) Accessories: original box, instruction manual Main Specifications: Brass Arm Base Compatible Arm: Micro MA-505X/505S/707X, EMT 929, Ortofon RS-212/RMG-212/SMG-212-2, Audio-Technica AT-1005-2, Audio Craft AC-300C, denon DA-303/305/307/309/401, FR FR-54/24mK2, SAEC WE-308N/308SX/407-23, Grace G-545F/707/ 840FB/940/945S etc
- description
- I cut the price! 2021/2/27 Selling Price 30,000 yen Base for SME Long Arm (3012/3012R) Compatible with Micro/SX-8000/5000/3000/1500 series Appearance, there are kusumi and dirt. (Satoshi Yonejima) Accessories: No accessories Main Specifications: Weight approx. 1,000g
Used
Consigned
Hold
ReservedSold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
