A marble board with marble specifications that can be used as a base for amplifiers and players. The firm strength of the stone strongly dampers the equipment. There are 6 holes on the back. There are discolorations and scratches (Kanai Hidetsugu)
Main specifications: W610 x H20 x D410 mm Weight about 13.6 kg
※The cover is not included. Unspecified set of 4 banana plugs The wire can be attached with a flathead screwdriver, and no soldering is required. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/29 sales price 2,500 yen. A pair of granite boards. Tighten the feet of the speakers and reduce floor noise. Mirror finish on 1 side only There is a missing horn (Murakoshi Yoichi)
Accessories: none
Main specifications: W400×H13×D400mm 5.5 kg/sheet
I think it's probably made by Western Labs. This is a 21A replica horn with the Western logo. It's one size larger than 22A and brings out the best of 555 to the fullest. The curved finish of the Calhoun is also well made. The exterior includes scratches and paint peeling. (TAMURA Eiji)
Accessories: There are no accessories
Main specifications: opening 850 x 755 mm, overall part W850 ✕ H1110 x D720 mm
Standard jack to RCA (female) conversion plug pair gold plated It can be used to input commercial power amplifiers, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.9.13 Conductivity Confirmed
Accessories: none
The price has been drastically reduced. 2023/12/29 sales price 4,000 yen. A pair of granite boards. It tightens the feet of speakers and devices and reduces floor noise. Mirror finish on 1 side only There is a missing horn (Murakoshi Yoichi)
Accessories: none
Main specifications: W600 x H25 x D300 mm 11.8 kg/sheet
The disposal price has been reduced. *Member prices are not applicable. 2024/2/14 sales price 89,800 yen Maintained! Sanei Radio's tube kit preamp. The clear and warm sound makes it comfortable to listen to. Since it is equipped with a phono equalizer, it is an item where you can fully enjoy the analog atmosphere. The exterior has rust spots, line scratches, and dullness (Tamura Eiji)
Maintenance information: 2024.2.14 Maintained (replaced due to damage to the INPUT selector switch. Vacuum tube replacement. Main volume disassembly contacts are polished and cleaned due to poor volume contact. Balance volume, switch contact cleaning. Balance shaft lubrication. The input/output terminals were replaced due to poor corrosion contact. Replace the power cord and stopper. Wiring correction. (Missing screw installation, and other operation checks.)
Accessories: wiring diagram
Main specifications: used vacuum tube ECC83, ECC81, ECC82 W479 x H110 x D410 mm 8.95 kg
Set of 4 banana plugs High purity 24K plating. It has an excellent structure that can reliably contact multicore cables with conductor diameters up to 5.5mm with a single hex wrench included. (Kanai Hidetsugu)
Accessories: original box
Main specifications: High purity 24K gold plated cable insertion part size, inner diameter 3.8mm to 5.8mm, conductor (core wire) insertion part 3.8mm
Set of 4 banana plugs *The case is different, and it comes in a Y-lug case. High purity 24K plating. It has an excellent structure that can reliably contact multicore cables with conductor diameters up to 5.5mm with a single hex wrench included. (Kanai Hidetsugu)
Accessories: original box
Main specifications: High purity 24K gold plated cable insertion part size, inner diameter 3.8mm to 5.8mm, conductor (core wire) insertion part 3.8mm
Set of 4 Y rugs Terminal kit for universal speaker cable with adjustable tip. It has an excellent structure that can reliably contact extra thick multi-core cables up to 5.5 square in diameter with a single hex wrench. (Kanai Hidetsugu)
Accessories: None
Main specifications: High purity 24K gold plated cable insertion part size inner diameter 3.8mm to 5.8mm, conductor (core wire) insertion part is 3.8mm Y lug tip size/inner diameter maximum 8.0mm, minimum 6.0mm/outer diameter 14.0mm
Speaker cable 2.0m pair terminal Y lug → Y lug specification by wire specification (custom-made product) Zonotone flagship model. Ultra high purity 7 nCu, special alloy material with high purity copper, PCOCC with excellent crystal structure, pure silver OFC, high purity oxygen-free copper hybrid structure. It is a truly high-end sound with outstanding quietness and high contrast, three-dimensional and deep bass sounds, and the high-frequency characteristics are also delicate and highly prepared. I'm satisfied with its thickness (Asaina Tomonori)
Maintenance Information: 2022.11.22 Confirmation Confirmed
Accessories: none