The disposal price has been reduced. Discounts for members are not applicable. 2022/6/19 sales price 248,000 yen* It is an external leg product (made by TAOC). The whole body has been maintained! AIWA's last top-of-the-line 3-head cassette deck. The extremely high-performance Dolby B/C/S is attractive and allows for high-quality recording and playback. Equipped with a real 18-bit linear dual D/A converter, you can connect a digital source as it is. Please enjoy the sound that sets it apart from ordinary cassette decks. There are many scratches and line scratches on the upper front panel and the upper side of the side wood (Yoichi Murakoshi)
Maintenance information:2022.6.17 Maintenance (mechanical cleaning, belt replacement, leg TAOC made substitute installation, door opening/closing assist mechanical part spring additional treatment, flywheel cleaning and shaft part Oil application, capstan motor speed adjustment, input/output PIN jack replacement, recording circuit electrolytic capacitor replacement, tape running path check and adjustment, playhead azimuth angle adjustment, playback level Check and adjust, recording level check and adjustment, pinch roller check, recording bias, level calibration operation check. (Recording level volume cleaning treatment, substrate solder status check and additional solder treatment, recording test operation confirmation by Degital input signal, timer operation test confirmation.)
Accessories: Instruction manual (English)
Main specifications: 3 head deck recording re-6N winding pure amorphous head equipped with super AMTS digital input possible (COX/OPT) Dolby B/C/S/HXPro equipped wah flutter 0.018% Frequency characteristic 8Hz to 27kHz (metal tape) SN ratio 87dB (Dolby-S) W469×H151×D415mm 14.0kg
A 3-head cassette deck that is also compatible with metal tape. The head part adopts the CVC (Combination V-Cut) 3-head system, which is a further development of the 3-head system. * Due to the high sensitivity of the remote control sensor of this unit, if there is a malfunction caused by a fluorescent light in the room you are using, it is recommended that you devise a device to avoid the light of the fluorescent light on the sensor near the power switch. There are small scratches on the exterior. Serial 10501548 (Miura Kimiya)
Maintenance information: 2019.9.28 Maintained (replacement of capstan belt, reel drive belt, counter belt. Play, FF, REW idler cleaning Electrolytic Condenser Replacement x20 and Resistor Exchange x1 Output volume repair. 6 x Dolby Circuitry Film Capacitor Replacement (Lever switch cleaning)
Accessories: No accessories
Main specifications: 3 heads, 4 tracks, 2 channels, frequency characteristics 20Hz to 20kHz (metal) SNR 54dB (Dolby off) 68dB (Dolby on) recording system AC bias ( 105 kHz) W480 × H120 × D365 mm 9.8 kg
A 3-head cassette deck that is compatible with metal tape. The head part uses a CVC (combination V-Cut) 3-head system, which is a further development of the 3-head system. * This unit's remote control sensor is highly sensitive, so if a malfunction occurs due to a fluorescent light in the room you are using, we recommend that you use a sensor near the power switch to avoid fluorescent light. There are small scratches on the exterior. Serial 10501548 (Miura Kimiya)
Maintenance information: 2019.9.28 Maintained (replacement of capstan belt, reel drive belt and counter belt. Play, FF, REW idler cleaning Electrolytic Capacitor Replacement x20 and Resistor Exchanger*1 output volume repair. Dolby Circuit Film Capacitor Replacement x6 lever switch cleaning)
Accessories: There are no accessories
Main specifications: 3 heads 4 tracks 2 channels frequency characteristics 20Hz to 20kHz (metal) SNR 54dB (Dolby off) 68dB (Dolby on) recording method AC bias ( 105kHz) W480 x H120 x D365 mm 9.8 kg