The disposal price has been reduced! (Member discounts are not applicable) 2022/4/16 selling price 24,800 yen* It is cheap because there are cracks on some sides. Backload horn enclosure for 16cm A solid and robust construction reminiscent of a Nagaoka enclosure. The horsepower and volume of the bass are unique to the backroad. The appearance has some cracks, dullness, and small scratches on the sides (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W226 × H676 × D450mm Weight 12.4 kg
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The Fostex 20cm double woofer enclosure D-70 is a plywood cut service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in stereo magazines at the time, and this is not a genuine assembly kit. There is no difference in dimensions or material. Wiring, SP terminals, detailed instructions, etc. are not included. If you can understand it, and if you are a self-made person, how about DIY this summer!? *The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications:20cm Backload Enclosure for Double Woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight approx. 93.6 kg
An appendix 2-way bass reflex enclosure kit published by Musico-no-Tomosha STEREO magazine on 2014/8/1. It's unassembled (Sasaki Shota)
Accessories: none
Main specifications: size W98 x H200 x D141 mm after completion
38cm woofer enclosure for Tatematsu Sound. The previous owner had a TAD TL-1601B installed. The thick board thickness typical of the company can be expected for low frequency reproduction with a strong sense of stability. Large lines and other small wounds are scattered on the side (Murakoshi Yoichi)
Main specifications: front baffle plate with saran net, thickness 24 mm, top and bottom side plate thickness 37 mm, W840 x H692 x D545 mm
The price has been drastically reduced. 2022/5/3 selling price 150,000 yen Great Plains Audio (ALTEC) 515-8HHP was installed. An enclosure for a mane pine 38cm woofer. The side has a thickness of 40 mm, and it is quite robust. A self-made trolley is included. There are small scratches. One saran net dowel is broken. * Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: self-made trolley
Main specifications: Baffle opening diameter 355mm from screw to screw 370mm (diagonal) W680 × H900 × D556mm (actual measurement)
A custom-made enclosure made by Tatematsu Onko, a long-established box-making company. JBL's 4340/4341 is slightly smaller, and SANSUI's EC-146 is one size smaller. The good size, which is about halfway between 4343 and 4333, is attractive. It is made in a 3-way configuration, and can be fitted with 2405 and 075 tweeters, H91 straight horns, and 38cn woofers. The whole thing is dull and there is a feeling of use (Murakoshi Yoichi)
Accessories: saran net, ducts
Main specifications: size W586 x D455 (510 when net attached) x H900 mm weight approx. 45 kg/1 bottle
The price has been reduced. 2024.1.8 sales price 130,000 yen First arrival! Rugged 38cm enclosure with a 30mm thickness. How about together with the Woodhorn Hi-α310X which is in stock at the same time? There are minor scratches, bumps, etc. ※Shipping costs are estimated separately (Oikawa Tetsuji)
Main specifications: W540 x H800 x D470 mm 42 kg (actual measurement)
Great Plains Audio (ALTEC) 515-8HHP was installed. An enclosure for a mane pine 38cm woofer. The side has a thickness of 40 mm, and it is quite robust. A self-made trolley is included. Please note that the screw pitch is a slightly special 380mm size. The appearance has scratches and small scratches. Both saran net dowels are broken in one place. * Shipping costs will be estimated separately (Satoshi Yonejima)
Accessories: self-made trolley
Main specifications: Baffle opening diameter 355mm from screw to screw 380mm (diagonal) W680 × H900 × D556mm (actual measurement)
The price has been reduced. 2022 9/18 sales price 140,000 yen A vertical 38cm woofer enclosure equipped with Great Plains Audio (ALTEC) 515-8HHP. The sides are 40mm thick, and they are quite sturdy and heavy. Please note that the screw pitch is a slightly special 380 mm size. There are scratches and small scratches on the exterior. Both saran net dowels are broken in one place (Takasaki Atsushi)
Accessories: saran net
Main specifications: Baffle opening diameter 355 mm from screw to screw 380 mm (diagonal) W680 × H900 × D556 mm (actual measurement)
Disposal prices have been reduced. Member prices are not applicable. 2023/1/19 sales price 298,000 yen The double woofer enclosure for JBL 38cm made by Tatematsu Sound is in stock. Four JBL 2235Hs were mounted. The sturdy construction suppresses unnecessary box sounds and plays tight low frequencies. It's good to make a new unit powerful, and it's also good to play a vintage unit in a relaxed manner; as expected, it's an enclosure called Tatematsu Onko (Fujisawa Koshi)
Accessories: unit mounting screws
Main specifications: plate thickness front 30 mm back 25 mm W1080 x H800 x D530 mm weight 78 kg (actual measurement)
The price has been reduced. 2022/3/11 Sales price 25,000 yen 3WAY enclosure. It was only sold by Shinkosha, and the making itself is solid, so why not try assembling it with your favorite unit? The appearance has a feeling of use such as scratches and dullness, corners in several places, round marks on the top plate, stickers attached, etc. (Asa Tomoho)
Accessories: Saran net
Main specifications: Unit mounting hole diameter woofer 360 mm mid 107 mm tweeter 80 mm size 510 × 730 × 423 mm weight 27.3 kg (all measured)
It is a JBL C36 type enclosure made by Shinko, which is rare. Combinations of D130, 175, etc. are possible, so please finish the bi-count to your liking. The appearance has line scratches, turns, and chips. (Satoshi Yonejima)
Accessories: Saran net, legs
Main specifications: Woofer opening 345 mm Screw pitch 370 mm Driver part 135 mm Screw pitch 164 mm W492 × H730 × D401 mm 21.7 kg (1 piece)
The price has been reduced. 2024/5/24 sales price 35,000 yen Tannoy rectangular yoke type enclosure by Shinkosha, a popular manufacturer of domestic boxes. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg