Disposal prices have been reduced! (Member discounts are not applicable) 2023/7/25 sales price 99,800 yen SR series compact 2-way speaker system. professional speaker Equipped with a 2-way multi-amp drive changeover switch. If you like rough sounds with a live feel, don't miss it! The exterior has dullness, dirt, rust, scratches, etc. over time. Serial 11844 11871 (Asaine Tomonori)
Maintenance information: 2023.7.25 Sound output confirmed (good sweep test)
Accessories: none
<マルチアンプ時>Main Specifications: 2-way, 2-speaker, bass reflex system for low range: 38cm cone type (2226H) for high range: horn type (2426H+2370A) frequency characteristics 35 Hz to 18 kHz -10 dB nominal impedance 8 ohms sound pressure level 97 dB/W/m crossover frequency 1.1 kHz 2-way recommended crossover frequency 1.2 kHz to 1.4 kHz allowable input/impedance low range: 600W/8Ω High Range: 100W/8Ω External Dimensions Width 635 x Height 749 x Depth 460 mm Weight 35.9 kg
SR series subwoofer system. Equipped with 2 46cm woofers 2241HLP, it realizes low frequency reproduction that permeates all five organs and six senses. The speaker terminals have been replaced with WBT ones (Murakoshi Yoichi)
Maintenance information: 2023.6.15 inspected
Accessories: none
Main specifications: 4Ω 99dB W1240 x H782 x D630 mm 88.4 kg
Maintained! A large backload speaker system using JBL units by Sansui. This time, the individual is D130+175DHL+075, and the network is 3way with N1200 and N7000. You can enjoy the classic JBL sound on the back road in a quaint Sansui box. The exterior is neatly finished by maintenance (Oikawa Tetsuji)
Maintenance information: 2022.1.30 Maintained (exterior repair/polishing/oil finishing/baffle repair before and after new hakama creation/hakama, painting
Lattice repair, polishing, painting, back fabric cleaning/reattaching Woofer maintenance (unit cleaning, terminal contact cleaning) Driver maintenance (magnetic circuit rust removal, gap cleaning center Adjustment, sound-absorbing material replacement, terminal contact cleaning) Tweeter maintenance (horn disassembly/polishing, magnetic circuit rust removal/gap cleaning, terminal contact cleaning) network maintenance N1200 ( Terminal rust removal (pickling) treatment, cleaning, insulation bushing & mounting screws replacement. Rotary SW replacement for ATT (SW type). A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results. (Input/output waveform and balance check, sound output check)
N7000 (terminal rust removal (pickling) treatment, cleaning, insulation bushing & mounting screw replacement. ATT Brand New Replacement Replacing capacitors. * Some capacitors before replacement are left inside because they are difficult to remove. A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results. (Input/output waveform and balance check, sound output check) Unit detachment/new wiring)
Accessories: none
Main specifications: 2-way, 2-speaker, backload horn type, floor type Unit: 38cm cone type D130/medium range driver and horn 175dLH Network: N1200 acceptable Input: 50W Impedance: 8Ω Output sound pressure level: 100dB W614 × H1,034 × D520mm
Maintained! A large backload speaker system using a JBL unit by Sansui. The individual this time is a D130+175DHL+075, and the network is a 3-way network equipped with the N1200 and N7000. You can enjoy the JBL sound of the royal road on the backroad with a quaint Sansui box. The appearance is beautifully finished due to maintenance. Serial 53070290 53070304 (Yuki Yamato)
Maintenance information: 2022.4.9 operation confirmed
2022.1.30 Maintained (Exterior Repair/Polishing/Oil Finishing Hakama New Creation Front and Rear Baffle Repair/Hakama/Painting
Lattice repair/polishing/painting, back fabric cleaning/reattaching woofer maintenance (unit cleaning, terminal contact cleaning) driver maintenance (magnetic circuit rust removal/gap cleaning center Adjustment, sound absorbing material replacement, terminal contact cleaning) tweeter maintenance (horn disassembly/polishing, magnetic circuit rust removal/gap cleaning, terminal contact cleaning) network maintenance N1200 Terminal rust removal (pickling) treatment, cleaning, insulation bushing & mounting screw replacement. Rotary SW replacement for ATT (SW type) Frequency characteristic measurement check (~ approx. 42 kHz) is performed and the original capacitor is continued to be used for good results. (I/O waveform and balance check, sound output check)
N7000 (terminal rust removal (pickling) treatment, cleaning, insulation bushing & mounting screw replacement. ATT new replacement Replace capacitor * Some capacitors before replacement are difficult to remove, so they remain inside. Frequency characteristic measurement check (~ approx. 42 kHz) is performed and the original capacitor is continued to be used for good results. (I/O waveform and balance check, sound output check) Unit detachment/new wiring)
Accessories: Saran net
Main specifications: 3-way, 3-speaker, back-load horn system, floor type unit: 38cm cone type D130/mid-range driver & horn 175DLH tweeter 075:8Ω horn type Tweeter Unit Alnico Magnet Crossover Frequency 2,500Hz Allowable Input 20W Network: N1200 Allowable Input: 50W Impedance: 8Ω Output Sound Pressure Level: 100dB W614 × H1,034 × D520mm
Maintained! A large backload speaker system using JBL units by Sansui. This time, the individual is D130+175DHL, and the network is 2way with N1200. You can enjoy the classic JBL sound on the back road in a quaint Sansui box. The appearance is neatly finished by maintenance. Serial 53040156/53040159 (Satoshi Yonejima)
Maintenance Information: 2022.1.4 Maintained (Terminal Rust Removal (Pickling) Treatment, Cleaning, Insulation Bushing & Mounting Screw Replacement. The fixing of coils inside the housing is reinforced with silicon. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results. Check the input/output waveform and balance, and check the sound output. Woofer maintenance (unit cleaning, one side cone paper tear repair, terminal contact cleaning) exterior repair, polishing, oil finish. Front and rear baffle/Hakama repair and painting. Lattice repair, polishing, painting, lining fabric cleaning/reattaching. Unit detachment Driver maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, sound absorbing material replacement, terminal contact cleaning)
Accessories: Saran net
Main specifications: 2-way, 2-speaker, backload horn type, floor type Unit: 38cm cone type D130/medium range driver and horn 175dLH Network: N1200 acceptable Input: 50W Impedance: 8Ω Output sound pressure level: 100dB W614 × H1,034 × D520mm
The disposal price has been reduced! (Member prices are not applicable) 2024/4/2 sales price 278,000 yen The lively sound has been revived through careful maintenance utilizing original capacitors. JBL's rare 36cm coaxial 2-way unit LE14C is mounted on the S-99 Athena enclosure made by Utopia Equipment. The high frequencies are also connected to a cone-shaped unit, and you can enjoy a variety of music sources with smooth, natural sound. There are repair marks on the top plate and right corner. Serial 98300, 98311 (Fujisawa Yukishi)
Maintenance information: 2023.4.18 maintained (exterior maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice back fabric repair), unit maintenance (low frequency side: edge replacement, damper replacement, cone paper repair/coating, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high range side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning), Network maintenance (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~42 khz) was performed, and the original capacitor was continued to be used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type unit 35.5 cm coaxial 2-way (LE14C) network LX2-1 crossover 2,000 Hz impedance 8 ohms W450 x H610 x D346 mm
Disposal prices have been reduced. Member discounts do not apply. 2023/4/19 sales price 278,000 yen. The vibrant sound was revived by careful maintenance utilizing the original condenser. JBL's rare 36cm coaxial 2-way unit LE14C is mounted on the S-99 Athena enclosure made by Utopia Equipment. You can enjoy a variety of music sources with smooth, natural sound connected to the high frequencies by cone-shaped units. There are repair marks on the top plate and right corner (Murakoshi Yoichi)
Maintenance information: 2023.4.18 maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice lining repair) unit maintenance (low frequency side: edge replacement, damper replacement, cone paper repair/paint, magnetic circuit rust removal/gap cleaning, center adjustment, terminal contact cleaning, high range side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network Maintenance (terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~approx. 42 khz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check).
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf unit for low frequencies 35.5cm coaxial 2-way (LE14C) network LX2-1 crossover 2000Hz impedance 8ohm W450×H610×D346mm
Disposal prices have been reduced! (Member discounts are not applicable) 2023/10/8 sales price 278,000 yen The vibrant sound has been revived through careful maintenance that makes use of original capacitors. The S-99 Athena enclosure made by Utopia Devices is equipped with JBL's rare 36cm coaxial 2-way unit LE14c. You can enjoy a variety of music sources with smooth, natural sounds connected to the high frequencies with a cone-shaped unit. There are repair marks on the top plate and right corner. Serial 98311 (Kimiya Miura)
Maintenance information: 2023.4.18 Maintenance (exterior cleaning/touch repair, top plate polishing/oil finish, lattice lining fabric repair), unit maintenance (low range side: edge replacement, damper replacement, cone paper repair/paint, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high frequency side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning, high frequency side: magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning), network Maintenance (terminal rust removal, acid cleaning, insulation bush & mounting screw replacement. ATT new product exchange. Frequency characteristic measurement checks (~approx. 42 kHz) were performed, and the results were good, so the original capacitor was continuously used. Input/output waveform and balance check, sound output check))
Accessories: lattice grill
Main Specifications: 2 Way 2 Speaker Bass Reflex System Bookshelf Type Unit 35.5 cm Coaxial 2 Way (LE14C) Network LX2-1 Crossover 2,000 Hz Impedance 8Ω W450 x H610 x D346 mm