Maintained! A masterpiece power amplifier with an all-FET circuit configuration. The size of the sound stage and the quick attack and the way the penetrating sound disappears are excellent. The hairline finish on the front panel and the LED switch with an impressive orange light are also attractive. The exterior has dullness, small scratches, and cracks on the speaker terminals. Serial 02545 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Maintained (replacement of defective parts in the main amplifier power supply circuit. Output relay replacement. Input volume contact correction)
Accessories: copy of instruction manual
Main specifications: 350W+350W (4Ω) 240W+240W (8Ω) W435 × H182.7 × D361.5 mm 20.9 kg
The price has been drastically reduced! 2024/6/19 sales price 148,000 yen A high power amplifier boasting a 200W output for each channel with a large toroidal transformer, a large capacity 60,000 μF capacitor, and 10 high-current transistors on each channel. It has very high performance with many specs such as thickness, resolution, and fineness, and is a bargain. As for the exterior, there is a small scratch on the front panel. Serial 707-061018 (Yonejima Satoshi)
Maintenance information: 2024.6.19 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output 500W (20-20,000 Hz, 0.09% THD,8) total harmonic distortion ratio 0.003% (20-20,000 Hz, at rated output) mixed modulation distortion ratio 0.09% (60 Hz: 7000 Hz = 4:1, at rated output) peak current 120A input sensitivity/impedance line (RCA) 1.6V/12k (XLR) 2.5V/100K damping factor 800 (20- 20,000 Hz) frequency characteristics 10-100,000 Hz (± 1 dB) S/N ratio (IHFA network) 116 dB power consumption 550 W W431 x D407 x 150 mm 18 kg
The price has been drastically reduced. 2024/6/22 sales price 148,000 yen Maintained by Taiyo International! JEFF ROWLAND's compact power amplifier, MODEL 102, has arrived. Although it is small, the driving power is high enough with a 100W output. In combination with CAPRI, it shows maximum tonal appeal, and it is a powerful machine that is compatible with various pri even when used alone. Part 1 of the characters have disappeared on the exterior, and there are small scratches and bumps (Sasaki Shota)
Maintenance information: 2024.4.10 Maintained by the manufacturer (replaced due to lack of capacity of the electrolytic capacitor. (Left and right level and other characteristic tests and running tests are carried out)
Accessories: copy of manual, power cable
Main specifications: 100W+100W (8Ω) frequency characteristics 54-65kHz damping factor 1000 twin mono configuration machined aluminum block W348 x H68.5 x D190 mm 3.4 kg
The price has been drastically reduced. 2024/6/21 sales price 348,000 yen EVO model with methacrylate panels for the top plate and aluminum panels for the side plates. The twin parallel push-pull JOB circuit uses a large capacity power transformer with an independent LR, and the compact yet powerful, high-speed sound is attractive. There is a hook or line scratch on the top plate, a line scratch on the side edge of the front, and a small scratch on the side ※Power cables are being ordered (Kojima Yosuke)
Maintenance information: 2024.6.21 operation confirmed
Accessories: Power cable x 2
Main specifications: rated output 250W (2-8Ω) W300 ✕ H65 ✕ D300mm 9kg/unit
Comes with original box, good condition! Successor to the current Accuphase model, the A-47. Class A thickness and warmth like a vacuum tube are added to the neat and clean sound unique to Accuphase. The exterior is good with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.22 operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: pure A grade 45W+45W, bridge connection 180W (8Ω) damping factor 800 W 465 x H211 x D464 mm 33.0 kg
It is a power amplifier with extremely high cost performance. It has good loss in the mid to high range, and is crisp. It seems to go well with vocals and acoustic songs. The smart front design, including the meter panel, is also one of the attractions. The exterior has small scratches, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.6.20 sound output confirmed
Accessories: none
Main specifications: 70W+70W (8Ω) MOS-Class AA circuit power consumption 210W input level adjustable (with direct input) W430 x H136 x D344 mm 9.8 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance Information: 2024.6.17 Maintained (Transistors and resistors have been replaced. Other adjustments have been made)
2024.4.15 Maintained (1 deteriorated transistor replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The disposal price has been reduced. Member prices are not applicable. 2024/6/8 sales price 498,000 yen This is AYRE's ambitious work that takes advantage of the characteristics of FETs and uses a perfectly balanced circuit configuration from input to output. A non-feedback type complementary circuit that combines the input stage of a cascade connection with the output stage of the source follower is used. You can listen to a sound with a natural feel that makes you feel the expanse of space. The exterior has scratches and dirt on the front, and there is a feeling of use such as scratches overall (Mizusaki Ryo)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) 100V specification W460 × H180 × D460 mm 43 kg
The price has been drastically reduced! 2024/6/18 sales price 450000 yen Hi-Fi Hall's first Amphion mono power has arrived! Driving power and power have increased as mono has become mono, and it is a highly expressive amplifier that clearly depicts the outline of musical instruments, etc. There are small scratches on the exterior. Genuine Scantech Serial APM0007/APM0008 (Tamura Eiji)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: rated output 120W x 2 (8Ω) 200W x 2 (4Ω) input terminal RCA x 1 system/XLR terminal x 1 system W400 x H100 x D400 mm weight 22 kg
The price has been drastically reduced! 2024/6/14 sales price 448,000 yen A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
The price has been reduced. 2024/6/11 sales price 298,000 yen Internal dismantling and full maintenance from all checks to transistor and capacitor replacement! It's an amplifier similar to the SE400S, but the output has gone up from 40W+40W to 60W+60W, and the sound quality with excellent extrusion and sharpness has revived the sound of the good old days. In addition to the exterior and input terminals being replaced, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (all internal dismantling checks, L/R co-power stage Tr negative side characteristic defect, Lch driver Tr characteristic failure → replacement, in-base bypass C · power supply C broken → replacement, offset VOL contact failure → polishing, check)
Accessories: Power cable (external product)
Main specifications: output bandwidth 3 to 20,000 Hz, 90 dB SNR power supply 100V, 50/60 Hz, power consumption 200W, output 60 W+60 W, W385 x H125 x D93 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 298,000 yen A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
The price has been drastically reduced! 2024/6/5 sales price 328,000 yen Maintained! Macintosh's first power amplifier with a balanced circuit configuration. Resolution and transparency have been added to the traditional rich, extruded tone. The blue meter, which can be said to be synonymous, is alive and well, and has plenty of presence, pleasing not only the ears but also the eyes. The exterior is dull and has small scratches. Serial JGC1730 (Yonejima Satoshi)
Maintenance information: 2024.6.5 Maintained (volume exchange (both channels) due to left channel volume shaft bending and poor contact points) lamp, electrolytic capacitor, etc. due to deterioration, acrylic removal cleaning, solder correction, connector cleaning, panel peeling correction (character area, etc. are not allowed) switch cleaning. Bias and offset check output audio check)
Accessories: copy of instruction manual
Main specifications: 300W+300W (2/4/8Ω), 600W during MONO (2/4/8Ω) W445 x H196 x D420 mm 35 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 49,800 yen ※Since it is a commercial amplifier, it will be handed over as is. Genuine Hibino The sound is bright and powerful, and it seems to go well with jazz as well as rock music. The fan's driving sound is quite loud. The exterior has a feeling of use such as dullness. Serial A286233 (Jun Tamai)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: 230W x 230W (8Ω) 335W x 335W (4Ω) W480 x D415 x H90 mm
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
Genuine Harman Mark Levinson's masterpiece amplifier. The large diameter unit is moved lightly with an order of magnitude of driving force. The tight, deep low-range texture is wonderful, and it clearly depicts slight differences in pitch and differences in the timbre and nuance of the instrument. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.10 Operation confirmed
2023.4.13 Maintained (replacement of deteriorated parts such as capacitors, resistors, etc., part of the board was corroded due to condenser fluid leakage, and was cleaned and repaired.
Other inspections and adjustments have been made)
Accessories: power cord (non-genuine), copy of instruction manual, remo pin, short pin
Main specifications: Dual monaural configuration, stereo amplifier, rated output 200W+200W (8Ω), frequency characteristics, 4 to 140000 Hz, SNR, 104 dB, input impedance, 50 kΩ, dimensions W483 x H210 x D450 mm, weight 40 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/27 sales price 148,000 yen Maintained! It is a model that is small yet has a calm and glossy tone. A combination with European speakers is recommended along with the company's Pre-44. A slightly more modern taste than the 405 has been added. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial Q078428 (Hiroki Aso)
Maintenance information: 2024.4.27 maintained (internal dismantling check, power Tr driver, Tr check, replacement of each C in the board, partial soldering, defect correction, bottom rubber foot mounting operation check)
Accessories: copy of instruction manual DIN to RCA (female) conversion cable, power cable (general purpose)
Main specifications: 100W+100W W341×H115×D195mm 9.0 kg
Maintained! 117V specification. A masterpiece model from the golden age of Macintosh. With an output of 50W, the modest yet rich, and flavourful sound is attractive. You can enjoy the rich and realistic sound in combination with a pri of the same age. The exterior is dull and has small scratches. Serial AT2722 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (each indicator lamp replaced. Electrolytic capacitor replacement. Input volume and switch cleaning. Bias and offset checks. Output audio check)
Accessories: copy of instruction manual
Main specifications: 117V specification output 50W+50W load impedance 4, 8, 16 ohm input sensitivity 0.5V full stage direct connection pure complementary output transformer W406 x H138 x D330 mm 22.7 kg
The price has been drastically reduced! 2024/5/31 sales price 178,000 yen Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed because the switch is stuck. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
The price has been drastically reduced. 2024/6/4 sales price 698,000 yen Oba Shoji genuine 2nd generation mono amplifier equipped with an ultra-high speed switching power supply. The suppleness, delicacy, and strength are all first-class products. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. There are 2 noticeable paint peeling spots on the top plate and light scuffs and minor scratches in places (Sasaki Shota)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: 200W+200W (8Ω) 350W+350W (4Ω) main body W445 × H97 × D335 mm 13.5 kg/unit power supply unit W445 × H97 × D319 mm 13.7 kg/unit
The disposal price has been reduced! (Member price not applicable) 2024/6/2 sales price 49,800 yen High power amplifier using a perfectly balanced Class D amplifier. The high output of 300W and plenty of driving power are attractive. It reproduces PC audio with low distortion and wide range. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord, adapter, original box
Main specifications: 300W x 2 (4Ω) 165W x 2 (8Ω) W200 x D155 x H41 mm 0.7 kg
Maintained! A power amplifier from the USA Marantz era. The compact yet powerful American sound is attractive. It works great with speakers that make a lot of noise, such as JBL, and you can enjoy an exciting sound that is clear. Exterior, paint deterioration, dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (lamp replacement (replacement), power stage Tr check, C replacement, DC offset, bias adjustment, relay contact cleaning, operation check)
Accessories: none
Main specifications: 80W+80W (8Ω) damping factor 30 (8Ω) power meter (sensitivity can be switched in 3 levels) mounted dimensions W358 x H120 x D273 mm weight 11 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/30 sales price 398,000 yen ※It is cheap because there are many scratches. Maintained by Taiyo International. This time it comes with a special battery BPS-2. Geoff Roland's peak stereo power amplifier. Genuine Oba Shoji product. A thorough non-resonance design using the company's traditional hard aluminum material. The high range with a sense of transparency and sharpness, the mid and low range with a sense of speed and driving power, and a vivid and satisfying sound are attractive. The exterior has scratches, line scratches, and dirt marks (Ryo Mizusaki)
Maintenance information: 2024.5.2 manufacturer maintained (BPS-2: internal cleaning, battery replacement, inspection of various parts, operation inspection. (Model2: Inspection of each part, characteristic inspection, running test)
Accessories: power cord, connection cable
Main specifications: 75W+75W (8Ω) GAIN26/32dB with changeover switch, input impedance with HIGH/LOW changeover switch, input impedance switching W445 × H133 × D362mm 21kg BPS-2: W445 × H133 × D362 mm weight 22 kg
※There is no problem with operation, but it is currently sold because it is cheap. Sony ES series power amplifier using a G chassis. It's an easy-to-use model with an unobtrusive tone, and it makes you feel the power of the low frequencies. It has 2 input systems with volume, and in addition, it is also attractive that it can be used in mono, so it is versatile. In addition to the exterior, no side panels, and a sticky mark on the back, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual
Main specifications: 110W+110W (8Ω), 300W (BTL 8Ω) W470 x H150 x D365 mm 13.2 kg
※There is no problem with operation, but it is currently sold because it is cheap. Sony ES series power amplifier using a G chassis. It's an easy-to-use model with an unobtrusive tone, and it makes you feel the power of the low frequencies. It has 2 input systems with volume, and in addition, it is also attractive that it can be used in mono, so it is versatile. In addition to the exterior, no side panels, and a sticky mark on the back, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual
Main specifications: 110W+110W (8Ω), 300W (BTL 8Ω) W470 x H150 x D365 mm 13.2 kg
Maintained! Standard model of 120V commercial power amplifier. It's high watt and can be played with plenty of room even with large speakers. Even though it's for commercial use, there is little coloring and the feeling that the sound flies straight through is very appealing. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance completed (replacement of C and IC etc. within the board, VOL cleaning*Please narrow down the VOL when the power is off)
Accessories: none
Main specifications: 155W+155W (8Ω) SNR 110dB W457 x D254 x H209 mm 18.1 kg
NEW GENERATION LUXMAN A CLASS POWER AMPLIFIER! In addition to the warm sound quality unique to Class A, the range is wide and driving power is sufficient. It has resolution and instantaneous power compatible with the latest speakers, and can easily drive even large speakers. It goes well with recent European speakers. The exterior has line scratches on the upper center of the front and top plate, and several scratches on the upper front corner and upper back corner (Kanai Hidetsugu)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W (8Ω) BLT240W (8Ω) W440 × H230 × D480 mm weight 47.0 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
Rare amplifiers are in stock! Stereo power amplifier imported directly from Denmark. It is equipped with a B&O ICEPower200ASC that is also mounted on the JEFF ROWLAND Model 102. You can enjoy straight, high-resolution sound. The exterior has small dents, bumps, and scratches on the top plate (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: power cord
Main specifications: 100W+100W (8Ω) impedance 3-16Ω W215 × H60 × D350 mm 3.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/27 sales price 248,000 yen maintenance completed! Genuine Electri 7CH high power multi amplifier Power amplifiers featuring high power of 200W each. Not only can it be used for AV surround and multiple amplifiers, but it can also be enjoyed as a normal power amplifier with sufficient driving power. The American sound is straight and has high instantaneous power. The exterior has noticeable line scratches and dullness on the front (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (card edge contact cleaning, excessive reviver cleaning, removal, disassembly, polishing, and resistance value check, mounting solder correction) 2022.11.4 maintenance completed (all amplifier board removal, card edge contact cleaning input and operation mode changeover switch cleaning FAN cleaning bias and offset check. (BTL mode check for each channel RCA and XLR input/output audio check)
Accessories: manual, power cable
Main specifications: each channel 200W/8Ω W440×H144×D483mm 25.4 kg
YBA's rare power amplifier is in stock for the first time at Hi-Fi! Uses a large double power transformer and an original Motorola power transistor. Engineers who were in charge of design at Goldmund are in charge of production, and the sound field is large. It is an amplifier with a very high degree of perfection, with precise tone, medium and low frequencies with intonation, etc. The exterior has dullness, threads, etc. (YONEJIMA Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cord
Main specifications: 85W+85W (8Ω) 170W+170W (4Ω) W430 × D330 × H132 mm,22 kg
Accuphase's pure A class stereo flagship model. The balance between static and dynamic, and soft and stiff is packed into this car. A power MOS FET with a reputation for sound quality and reliability is used as the output element, and 10 parallel push-pull drives are used per channel. Furthermore, the powerful power supply unit achieves linear high power up to an ultra-low impedance of 1 ohm. The exterior has some impact scratches on the corner. Serial D1Y562 (Fujisawa Yukishi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, power cable (general purpose)
Main specifications: 60 W+60 W (when 8 ohm stereo specification) 240 W (when 8 ohm mono specification/bridge connection) gain 28 dB load impedance 2 to 16 ohms (in stereo specification) 4 to 16 ohms (in mono specification/bridge connection) W465 x H238 x D515 mm weight 43 kg
Accuphase's pure A class stereo flagship model. The balance between static and dynamic, and soft and stiff is packed into this car. A power MOS FET with a reputation for sound quality and reliability is used as the output element, and 10 parallel push-pull drives are used per channel. Furthermore, the powerful power supply unit achieves linear high power up to an ultra-low impedance of 1 ohm. There are scratches on the exterior. Serial D1Y563 (Fujisawa Yukishi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, power cable (general purpose)
Main specifications: 60 W+60 W (when 8 ohm stereo specification) 240 W (when 8 ohm mono specification/bridge connection) gain 28 dB load impedance 2 to 16 ohms (in stereo specification) 4 to 16 ohms (in mono specification/bridge connection) W465 x H238 x D515 mm weight 43 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg