This model uses PCOCC material for the internal wiring of the AT33 series, a standard model of domestic MC cartridges along with the DL-103, and has acquired even greater transparency. The wide range and clear contours are also the appeal of the 33 series. The exterior has a feeling of use such as dullness and dirt on the body (Sasaki Shota)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: needle cover
Main specifications: MC type playback frequency band 15 to 50,000 Hz output 0.4 mV needle pressure 1.2 to 1.8 g impedance 17 ohms dead weight 6.8 g
※6 month warranty It is a parallel imported model and is probably not sold domestically. It boasts high efficiency (output sound pressure level 94 dB) in the 13 cm class, and lets you hear sharp sounds. There are no noticeable scratches on the exterior. Serial 106067519091742, 106067519091742 (Fujisawa Yukishi)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, original box, saran net, rubber feet
Main specifications: 2-way bass reflex system frequency characteristics 62 Hz to 24 kHz output sound pressure level 94 dB speaker maximum output 340 W W178 x H318 x D208 mm 4.67 kg
Mono specification. MC boost transformer using American UTC transformer. The cut is sharp and the sound is slightly tight, and it seems to be a good spice. Jazz is sharp, and classical music clearly expresses fine contours. The paint is peeling off and rust and floating can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: No accessories
Main specifications: MC transformer boost ratio 1:35 input 100Ω output 100kΩ W110 × H110 × D65 mm
A granite board with an all-mirror finish. It's the perfect size and thickness for a small speaker. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W200×H32×D200mm
※Sunburn marks are conspicuous on the top plate, so it is inexpensive. Comes with a remote control! PIONEER's turntable CD player has a reputation. It has a smooth sound and reproduces particularly high notes smoothly and beautifully. The CD format uses “Legato Link Conversion Technology,” which estimates and generates frequency components of 20 kHz or higher that have been cut in the CD format. There are sunburn marks on the top plate. Serial SKNN0022250JP (Satoshi Yonejima)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: remote control, power cable
Main specifications: DAC mode with sampling frequency switching (32/44.1/48kHz) W420 x H128 x D374 mm weight 10.0 kg
FOSTEX's 16cm full range unit pair is recommended for those thinking about making their own with a backload etc. with the goal of a clear, sharp tone and three-dimensional sound field space. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 sound output confirmed
Accessories: instruction manual, original box, mounting screws, gasket
Main specifications: 16cm double cone full range allowable input 65W 8Ω 94dB W166 × H166 × D77.6mm 1.6 kg
Speaker cable 1.9 m pair ends untreated. A new conductor made by mixing high-purity 6NCu with high-performance pure copper HIFC, tin-coated OFC, and high-purity oxygen-free copper. The dynamic sound that cannot be imagined with a thin exterior is attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
BELLDREAM digital needle pressure gauge This needle pressure gauge has a wide range of measurement locations and is easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 Operation confirmed
Accessories: none
Main specifications: Measurement range minimum 0.1 g to maximum 350 g
Comes with a stroboscope! Turntable seat made of butyl rubber and tungsten. Achieves clear, cloudy playback sound. It also has an excellent effect on preventing vinyl records from slipping. You can see a feeling of use, such as the exterior, dullness, white stains, and abrasions (Kobayashi Hitoshi)
Accessories: stroboscope
Power cable 2.0m PSE standard product holds the OFC conductor tightly with a PVC sheath, and 24K gold plating is used for plugs and connectors with polarity display. The sound quality is sharp and punchy. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 Continuity confirmed
Accessories: none
Balanced cable 1.0m pair Accuphase standard XLR cable. Oxygen-free copper OFC Ritz wire, 2-core shielded It is a cable with excellent corrosion resistance, and has a natural, unemphasized tone. The plug shell is dull and discolored (Kojima Yosuke)
Accessories: none
The 1.5m D.U.C.C 7N Cu+ stress-free conductor machined heavyweight aluminum ring and carbon kevlar composite sleeve are eye-catching. It is a high-end cable that is excellent for SN and clearly projects sound images. There are scratches and scuffs on the plug shell (Kojima Yosuke)
Accessories: none
The 2-core gold-plated plug shield part of the 1.0m pair 7N-OFC conductor (0.1 mm diameter x 105 stranded wire structure) of the RCA cable consists of 192 high-purity 7N copper wires braided at high density. It's a clear and high-grade cable (Kojima Yosuke)
Accessories: none
Speaker cable 6.0 m pair A classic BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a solid sound (Kojima Yosuke)
Accessories: none
The speaker cable 1.0 m pair custom-made terminal Y Lug 7N uses a composite copper collection centered on ultra-high purity copper, Higher-OFC with thick pure silver coating, and high-purity single crystal PCOCC, and simultaneously transmits fine and delicate information in an accurate, well-balanced, and dynamic manner at the same time as high currents. The storage case will be 2.0m (Kojima Yosuke)
Accessories: storage case
※Since it is an old standard, it is an inexpensive HDMI cable, 1.0 m, compatible with HDMI 2.0, Silver Clad OFC conductor, an advanced model in the STARLIGHT series. Although it is an old generation video cable, it is still a model with first-line performance as an audio cable (Kojima Yosuke)
Accessories: original box
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
A hidden masterpiece of Japanese MM cartridges. The moderately firm bass and detailed treble are attractive. A versatile cartridge that can be used for a wide range of purposes, from classical music to jazz. There are small scratches on the exterior (Tamai Jun)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: needle cover
Main specifications: mm type frequency characteristics 20 Hz to 20 kHz 47 kΩ output voltage 5 mV suitable needle pressure 1.5 to 2.0 g dead weight 6.5 g
A bespoke woodworking shop, creative shed speaker stand. It also has a sense of rigidity, and the chic design is attractive. There is a feeling of use such as scratches (Ryo Mizusaki)
Accessories: none
Main specifications: W362 x H302 x D302 weight 5,5 kg
There is a diamond mark sold per bottle, 12AX7 compatible sphere, smooth plate, measured value 48 (rejected value 32), printing is erased ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
There is a diamond mark sold per bottle, 12AX7 compatible sphere, smooth plate, measured value 46 (rejected value 32), printing is erased ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
There is a diamond mark sold per bottle, 12AX7 compatible sphere, smooth plate, measured value 48 (rejected value 32), printing is erased ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
Sold per bottle, rectifier tube, made in America, JAN measurement value 50 (rejected value 40) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
250mm caliber powered subwoofer Genuine AXISS The crossover is also continuously variable from 30 to 160 Hz, making it easy to set. It is recommended for those who want to easily build a surround sound. The exterior has peeling paint, scratch marks, etc. Serial 000529 (Tamura Eiji)
Maintenance information: 2024.6.29 sweep check OK
Accessories: power cable, instruction manual
Main specifications: rated output 160 W, crossover 30 to 160 Hz, continuously variable, W305 x H508 x D485 mm, weight 22 kg
Maintained! It is a pre-main amplifier with a simple design and full functionality. It is a delicate and careful tone with a luster in a lively, extruded and energetic sound. It shines with a sense of power that goes well with vintage speakers. The exterior is scratched on the top plate, and there is a feeling of use over time. Serial E7V064 (Fujisawa Yukishi)
Maintenance information: 2024.6.29 Maintained (output relay, push SW, semi-fixed VR, electrolytic capacitor, and balance VR replaced. Rotary SW disassembly polishing cleaning. Knob adhesive solder fix. Removes mold and rust. Increase and tighten the screws. Interior and exterior cleaning. Bias and offset check adjustments. (Voice check for each input/output)
Accessories: copy of instruction manual
Main specifications: 150w+150w (8Ω) PHONO (MM/ MC) W445 × H160 × D370 mm 20.5 kg
PSE certified product. It is a power strip unique to FURMAN equipped with an EMI/RFI noise filter circuit breaker that reduces noise caused by electromagnetic waves and radio waves. Equipped with 6 3-pin AC outlets. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Main specifications: ON/OFF switch with built-in circuit breaker light EMI/RFI noise filter W235 x H45 x D85 mm weight 1.25 kg
Tigron's 1.5m Peer Notric XLR terminal combines Tigron's technology with the imagination of Sunshine. High-class specification with Tiglon's highest grade cable treatment “H.S.E. Grande Treatment”. It is also very soft and smooth to the touch, making it easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Tigron's 1.5m Peer Notric XLR terminal combines Tigron's technology with the imagination of Sunshine. High-class specification with Tiglon's highest grade cable treatment “H.S.E. Grande Treatment”. It is also very soft and smooth to the touch, making it easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Maintained by the manufacturer! It is a full computer mechanical specification. It is an audio board that realizes a complete floating structure in the audible band from the idea of “floating” a WELLFLOAT speaker. Large speakers suppress unnecessary bass and can output bass with a higher degree of reproducibility (Murakoshi Yoichi)
Maintenance information: 2024.6.28 manufacturer maintenance (wire re-tensioning)
Accessories: none
Main specifications: W440 x H60 x D490 mm 8 kg load capacity 0 to 300 kg
※It is inexpensive considering conditions such as tobacco odor and dirt. Maintained by the manufacturer. 3-way cross channel divider with 500Hz/7,000Hz specification. If you add the LA-25 and DA-25 options, it can support up to 4 ways. Also, since it can be used by switching to a subwoofer system or a 3D system, it is highly expandable and can be flexibly incorporated into the system. In addition to the exterior, as described above, a feeling of use can be seen, such as stains on the top plate, dullness all over, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 Manufacturer maintained (level control volume, cleaned)
Accessories: none
Main specifications: crossover 500 Hz/7,000 Hz dimensions W475 x H170 x D380 mm weight 20 kg
Power cable kit supervised by Masamitsu Fukuda. This is a set of 2P plug, connector, and 102SSC cable without a ground electrode. The model numbers for plugs and connectors are P-079 and C-079 (Murakoshi Yoichi)
Accessories: plug, connector case and instruction manual
A set of 4 pottery blocks for large speakers made by Noritake, famous for high-grade tableware. The impression is that the sound is gentle compared to TAOC etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: W158 x H190 x D324 mm 10.4 kg
A set of 4 pottery blocks for large speakers made by Noritake, famous for high-grade tableware. The impression is that the sound is gentle compared to TAOC etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: W158 x H190 x D324 mm 10.4 kg
This is a high cost performance model that uses a new 1.5m PSE standard conductor PC-Triple-C conductor. You can easily enjoy high sound quality without worrying about the earth loop (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: original box
Maintained! Original model Model 9! A famous machine coveted by enthusiasts that, in addition to its instantaneous power and excellent texture, is also thick. The large speakers also have plenty of room to drive easily. Please enjoy the finest vintage sound with a volume that is simply impossible to compete with today. You can see the exterior, dullness, scuffs, rust, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.28 maintenance (main volume disassembly, cleaning and repair, AC cord replacement, power supply toggle switch pair replacement, block capacitor 60 μF replacement, BIAS/AC BAL. /DC BAL. Reconditioning, Vacuum Tube Sockets and RCA Jack Re-Caulking Repairs. Other operation checked (measured at 55 to 66 W SP: 8 Ω with rated output AC 100 to 117 V) 2015.4.25 maintenance (block.c60 μf deterioration replacement x 2 x 2 · EL.C10 μf, EL.C20 μf, EL.C250 μf replacement. VT EL34, Fuse holder, R1/2W 100Ω replacement, vacuum tube, parts check)
Accessories: instruction manual (English copy)
Main specifications: 70W mono power amplifier EL34 ECC88 6CG7 W390 x H210 x D265 mm weight 24.6 kg (1 unit)
Marantz mid-range aircraft with high cost performance. The sound quality is clear and natural with little distortion. The expressive power of the mid range and the sense of volume in the bass range are rich, and you can enjoy a wide range of activities from rock to classical music. There are small scratches, dullness, etc. on the exterior. Serial C101082201813 (Tomonori Asaine)
Maintenance information: 2024.6.29 Operation confirmed
Accessories: instruction manual copy remote control power cable
Main specifications: 70W+70W phono input 1 system (MM), line input, 5 lines, pre/power separation possible, WBT speaker terminal W440 x H128 x D364 mm 10.5 kg
The price has been reduced! 2024/6/29 sales price 15,000 yen*Since it is cheap, it will be handed over as is. A compact speaker from JBL. The wood-like design is also stylish. A speaker that is easy to listen to and use even for monitors. Although it is small, it makes a good JBL sound. The exterior is damaged, dull, and there is a feeling of use such as fraying on the saran net. Serial 53729 53730 (Tomonori Asaine)
Maintenance information: 2024.6.29 Operation confirmed
Accessories: saran net
Main specifications: 2WAY2 speaker bass reflex bookshelf impedance 8Ω W294 x H375 x D235 mm 8.2 kg
5.0 m pair end of speaker cable
This model uses 4 types of wire, mainly high-purity 6N copper. Of course, with the star card system, where 2 of the 4 cores are twisted and connected to each other, it is also possible to use each of the 4 cores as bi-wiring by dividing them into high range/low frequency (Tamai Jun)
* 2-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W595 x D473 x H295 mm, 180 mm between shelves (actual measurement)
* Black 2-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W595 x D473 x H335 mm between shelves 215 mm (actual measurement)
This phono equalizer is attractive for its extremely clear and sharp sound image localization and high amount of information. You can enjoy the same level of precision as modern high-end equalizers, and the natural texture unique to analog. It can be connected to 2 MM/ MC systems, so you can use it smoothly without plugging or unplugging the plug with the changeover switch. The exterior is generally good with no noticeable scratches. Serial AP10027 (Yamato Yuki)
Maintenance information: 2024.6.29 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: phono equalizer (MM/MC compatible) gain (@1khz) mC/66dB/mm/40dB input terminal MC/RCA x 1 system/mm/RCA x 1 system input switching switching with a toggle switch on the rear panel input impedance MC/100Ω/mm/47kΩ output terminal RCA x 1 system W360 x H64 x D230mm mass 4.8 kg
Comes with original box! Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. It is generally a beautiful item, but there is a line scratch on one side. Serial 4J13041 (Yamato Yuki)
Maintenance information: 2024.6.29 Operation confirmed
Accessories: instruction manual, power cable, connection cable, original box
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg