*Currently sold. Audio-Technica's MM/MC compatible phono equalizer. Although it is affordable, it is well-built and MM/MC compatible. Recommended for modern systems without phono input. In addition to the exterior and cigarette smell, dullness and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: AC power
Main specifications: input impedance mm47kΩ/mc100Ω W44 x H105 x D135 mm approx. 460 g
Beautiful item with original box! The optical digital cable is 3.0 m transparent and has high performance against external noise and electromagnetic noise from unnecessary radiation. This cable is ideal for digital transmission. The exterior is generally good (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: original box
XLR cable is a standard 5.0 m peer-notric XLR plug microphone cable. It is also characterized by its soft sound quality and ease of handling. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
XLR cable is a standard 5.0 m peer-notric XLR plug microphone cable. It is also characterized by its soft sound quality and ease of handling. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
XLR cable, 0.5 m pair, 3-core structure, Neutrik balance plug, 3-core specification. The sound is thick and solid throughout the entire range. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The RCA cable uses a 2.0m pair of 8N conductors, double shielded, and denser insulating materials and compression twists, and the sense of attack creates a realistic weight of sound. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA-XLR conversion cable 0.5m pair No. 2 is a standard BELDEN line cable that has a firm thickness in the mid to low range while clearly outlining the outline of the sound (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The 8412 modern version of the RCA cable 2.0m Peer Notric plug is all-Teflon insulated. It is a cable that is more instantaneous than the price, and is suitable for JAZZ and ROCK systems. The exterior is slightly dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The 1.3 m BNC cable uses 5N (99.9995%) pure silver as the center conductor. It is a model that was carefully created by Oyaide as a silver wire cable and won the 2006 Audio Famous Equipment Award. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
RCA-XLR conversion cable 2.0m pair, 2nd hot RCA plug made by CANARE, XLR plug used originally as a microphone cable, so sound loss is good. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
XLR cable with 1.0m peer-notric terminal, 3-core specification for the popular line cable “8412.” There is a sense of power throughout the entire range, and the warm sound quality with thick mid to low ranges is attractive. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA cable 0.5m pair notric terminal This is a standard BELDEN line cable that has a firm thickness in the mid to low range while clearly outlining the sound (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The 1.5m pair of XLR cables are XLR cables using Belden's 8423, NEUTRIK plugs. 3-core construction The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The RCA-XLR conversion cable 1.0m pair No. 2 hot plug is a reliable and proven Negrex commercial cable manufactured by Neutrik. Clear and honest sound quality (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA-XLR conversion cable 2.0m pair is a cable with a firm conductor similar in shape to a Siltech cable using a plug manufactured by Hotswitch Craft Co., Ltd. 2. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
This is a firm conductor cable with a shape similar to a Siltec cable using a 3.0 m pair XLR cable with a plug manufactured by SwitchCraft. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/17 sales price 10,000 yen*The amount of cleaning solution left is very small. stylus cleaner Using an ultrasonic cleaning method, the surface of the stylus is cleaned using a special cleaning liquid “FLUX FLUID” and the vibration of the brush pad. (ASAINE Tomonori)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, rubber foot cleaning solution, original box ※ torn
Main specifications: Power supply/use of 2 x AAA batteries, continuous use time approx. 5 hours, weight: 48 g
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
The pair tube seems to be made of RFT due to its 6CA7 compatible sphere structure. Measured value 42/40 (rejected value 30) lettering with replacement box is missing ※The pair is determined based on the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Speaker cable is a 2.2 m pair cable with untreated ends from the German manufacturer Einstein. Multi-core 4N copper wire construction. It is a well-balanced sound quality that achieves both thickness and resolution. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
It smells like tobacco, so it's cheap. LP record static removal brush Upgraded model of the best-selling SK-2. It is rhodium plated to remove static electricity more quickly and reliably. Can also be used on CDs and DVDs
Accessories: nothing
Main specifications: brush specifications/tip = natural hair (black goat's beard) root = synthetic hair (acrylic fiber), thickness 46 denier, conductive fiber (copper sulfide chemically bonded to acrylic fiber) W60 x H170 x D30 mm 36 g
The price has been drastically reduced! Yamaha's top CD/SACD player at the 2024/6/17 sales price of 298,000 yen. The D/A section is equipped with ESS Technology's new-generation 32-bit converter, SABRE (Sabre) 32 Reference DAC (ES9018). High quality design with fully balanced transmission at all stages, thorough low impedance, and high rigidity and low resonance construction. It is a model aimed at natural reproduction that reaches straight to the heart of the listener like an instrument. The lettering on the open/close button has become thinner. Serial Y022203WX (Fujisawa Yukishi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cord (non-genuine), remote control, spike base
Main specifications: CD/SACD player playable disc CD/SACD/CD-R/CD-RW frequency characteristics 2 Hz to 20 kHz (CD) 2 Hz to 50 kHz (SACD) W435 x H142 x D440 mm 19.2 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance Information: 2024.6.17 Maintained (Transistors and resistors have been replaced. Other adjustments have been made)
2024.4.15 Maintained (1 deteriorated transistor replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The price has been reduced. 2024/6/17 sales price 198,000 yen It is built in a form that satisfies modern recording requirements, such as a DSD 11.2 MHz USB-DAC, a phono amplifier compatible with MC cartridges, and balanced input. It is a playful preamp with warm sound by NuTube, which was jointly developed by KORG and Ise Electronics, and an audio driver equipped with “S.O.N.I.C. Remastering Technology” produced by Mr. Ono Seigen. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: original box, power cable
Main specifications: 2CH compatible format (USB) DSD 2.8224 MHz, 5.6448 MHz, 11.2896 MHz, 1 bit DSD3.072 MHz, 6.144 MHz, 12.288 MHz, 1 bit (only when using S.O.N.I.C. remastering technology) PCM44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz 352.8 kHz 384 kHz , 16 bit, 24 bit audio driver ASIO2.1, WDM, Core Audio (*no guarantee of operation of Windows other than Intel chips) external dimensions W432 x H93 x D282 mm 5.9 kg
The price has been reduced. 2024/6/16 sales price 128,000 yen Edge softening and maintenance completed! Good condition. This is a diamond-tone floor-type tall boy speaker. Edge softening treatment has been applied, and the low frequency, which sounds soft and has plenty of volume, is attractive. Please enjoy the sharp taste of the Boron mid-range and the bass reflex sound full of scale. There are no noticeable scratches (Sasaki Shota)
Maintenance Information: 2024.6.16 Edge softened
Accessories: none
Main specifications: 3 way 4 speakers, bass reflex system, floor type, anti-magnetic type, 6 ohms playback frequency band 32 Hz to 40000 Hz output sound pressure level 90 dB crossover frequency/400 Hz/500 Hz/5000 Hz W320 x H993 x D374 mm 46 kg/book
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
Rhodium plated The PSE standard cable clamp part was changed from conventional resin clamps to special stainless steel, which is heavy and has excellent damping properties. This effective vibration countermeasure maximizes the potential of the device (Oikawa Tetsuji)
Accessories: none
*The stylus is made by JICO. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The cantilever is slightly leaning to the left (Sasaki Shota)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: nothing
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
It is inexpensive because it leaves a cigarette smell. A turntable seat with high vibration resistance made of porous ceramic. It is a porous ceramic with 45 micron pores in an alumina crystal, and can be expected to have high vibration resistance (Sasaki Shota)
Accessories: none
Main specifications: 303 mm in diameter, 7 mm in thickness, 1.2 kg in weight
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
It is inexpensive because it leaves a cigarette smell. This is a carbon record mat. The fine vibrations transmitted from the turntable are reduced, the sense of silence is increased, and the sense of sound image is improved (Sasaki Shota)
Accessories: none
Main specifications: diameter approx. 295 mm, thickness 4 mm
The disposal price has been increased (member prices are not applicable). 2024/6/16 sales price 178,000 yen speaker cable 2.5 m pair by wiring terminal Y lug (using WBT0680CU) An extra thick cable using 12 high-frequency high-purity copper conductors with a VaristrandTM structure, 24 for low frequencies. As if the output of a power amplifier has been raised, the momentum of the sound's rise is amazing, and it always makes you feel a sense of power. It is suitable for speakers that are difficult to drive bass, such as the B&W 802 series. There is a crack in the plug shell, part of the polarity ring is missing, and there is a hole (mark like a stab wound) on the sheath (Kojima Yosuke)
Accessories: none
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
The price has been drastically reduced! 2024/6/16 sales price 698,000 yen piano black color Equipped with a diamond tweeter common to the 800 series, network parts, and an FST mid-range similar to the higher-level models. Although it is the same size as the 804S, the specs have been greatly improved, and it can be said that it is a completely new model. It is a speaker that is delicate, has high resolution, and extremely high sound quality with a sense of SN, has a large enough space to cover everything from high volume to low volume, and can accept all kinds of music. There is a slight feeling of use, and corrosion can be seen on the spikes. Also, there is stickiness due to deterioration of the bass reflex port paint. Serial 0007167/0007168 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, saran net, jumper cable, rubber feet, spikes
Main specifications: 3-way, 4-speaker bass reflex system, 8 ohms, W238 x H1020 x D351 mm, 27 kg
Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 manufacturer maintained (LED left and right replacement. Replace it with a new pink color. DC offset readjustment for amplifier section, voltage check for each part. (MUTE SW readjustment, measurement and overhaul of each part.)
Accessories: instruction manual, power cord, connection cord
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Maintained! Adjustable 3-way channel divider Crossover frequencies for LOW/MID 4 and MID/HIGH 4 stages can be selected. Furthermore, it is equipped with a FLAT position. It is possible to switch between 200/400/570/800 Hz and 2500/3500/5000/7000 Hz. There are small scratches and corrosion on the exterior. Serial 141628 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (replacement of deteriorated capacitors in the circuit. Power circuit transistor replacement. Switch and volume contacts corrected. I/O pin jack polish (This is a specification because each switch only makes a low sound when FLAT)
Accessories: No accessories
Main specifications: W408 x H134 x D280 mm weight 5.4 kg
Please note that since the CSE power cable is a 2.0m power control terminal for outlet taps, it cannot be used with normal devices. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.16 continuity confirmed
Accessories: original box
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
It has been replaced with a cloth edge. Currently sold. Onkyo's 3-way bookshelf speaker The stretchiness of the mid-high range, which is typical of Onkyo, makes me feel comfortable listening to vocals. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 sound output confirmed (replaced with cloth edge)
Accessories: saran net
Main specifications: 3-way bass reflex 6Ω 91 dB W380 x H670 x D363 mm 34 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg