Unspecified set of 4 banana plugs. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Unspecified set of 4 banana plugs. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
SPL (German recording professional equipment manufacturer) input/output balance terminal volume controller. By using an active circuit design, it is possible to avoid a decrease in linearity due to impedance changes that occur in passive circuits. The volume is continuously variable, so there is almost no imbalance between left and right, and it expresses a high level of sound quality. The exterior has a feeling of use such as dullness and small scratches. Serial 9020974 (Tomonori Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: Power cable (general purpose)
Main specifications: 1 XLR input/output system W215 x H80 x D220 mm 1.6 kg
Maintained! Comes with a remote control! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. As for the exterior, there are noticeable stains and scratches on the top plate, and there are many signs of use such as dullness and scratches over time. Serial MZ02816260168 (Yamato Yuki)
Maintenance information: 2024.6.6 maintained (tray slide motor belt, CD standby motor belt, wire belt fall off replacement, repair, aging 2 days)
Accessories: remote control
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
Sound Art's long-selling 3D speaker system. Once the setting is decided, it is a sense of scale and realism that greatly exceeds the size. * There is no problem with operation, but since the veneer has peeled off, cracks, etc., it is currently sold. *The subwoofer only has an RCA input, and the low frequency range does not appear even when input to the speaker terminal (Ryo Mizusaki)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers+woofer 100W 3D speaker system with built-in power amplifier satellite part W200 x H920 x D180 mm 9.5 kg, woofer part W430 x H300 x D580 mm 15 kg
A dedicated pre-main amplifier for Aura's line. A slim premain amplifier with a premium chrome finish. You can imagine it from a clean face. It has a silky tone and goes well with European speakers. There are dullness and scratches on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: 6 input systems with TAPE OUT 45W+45W (8Ω) Dimensions W430 x H62 x D310 mm Weight 5.0 kg
RCA cable 5.9 m pair This is an early model before the terminator module, which is also a characteristic of the company, was adopted. It's a sound with good sound separation and a good sense of localization. There is a lot of dirt and rubbing on the exterior (Kojima Yosuke)
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
RCA-XLR cable, 1.5m pair, 3rd hot specification, XLR male terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
Pair tube large punch top grid square getter code: 6413/6839 measured value 44/42 (rejected value 30) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Comes with original box. Set of 4 Y lugs This is a screw-fastening Y lug terminal by Oyaide, which boasts pure domestic production with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There are dullness and small wounds (Tamura Eiji)
Accessories: original box
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
1.8 m PSE standard power cable “BLACK MAMBA” featured from the fastest snake on Earth. As the name suggests, the sound is supple and high speed. And while it has high resolution, it is designed to be fully flat and balanced to suppress peaks. The letters have disappeared on the sheath and there are some cracks on the coating (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel significant changes due to power cables, and it is a high cost power cable. ※The wire material is hard, and this cable is slightly difficult to handle (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
RCA cable 1.2m pair finished LINN black cable If you're a fan of the company, you can't miss this classic cable. You can hear soft, smooth, precise, and well-organized sounds. (TAMURA Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
PC-Triple C, which has successfully arranged the crystal structure by forging to replace the 2.9 m PSE standard PC-OCC power cable, is used as the conductor. It has a cross-sectional area of 5.5 sq q, and is compatible with large output power amplifiers. (TAMURA Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
PC-Triple C, which has successfully arranged the crystal structure by forging to replace the 2.4m PSE standard PC-OCC power cable, is used as the conductor. It has a cross-sectional area of 5.5 sq q, and is compatible with large output power amplifiers. (TAMURA Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The 3-layer structure of the power connector, finished with female rhodium-plated carbon fiber, exudes a sense of luxury not found in this kind of self-acting plug. There is a tear in the coating (Tamura Eiji)
Accessories: none
The power plug has a 3-layer structure finished with rhodium-plated carbon fiber, which exudes a sense of luxury not found in this kind of self-acting plug. There is a tear in the coating (Tamura Eiji)
Accessories: none
The price has been reduced. 2024/6/27 sales price 24,800 yen For the first time in this class, silver wire and a solid oval needle were used as power generation coils. Also, the combination of the Boron cantilever used only in higher-level models and the Shibata needle stylus tip is excellent, and by combining this with an Aucurum (gold-plated 6N high purity conductor) power generation coil, the sound is one rank higher. The sound creation, which has a wide range yet is also moist, is truly amazing. The cantilever is leaning towards the right. Also, there is a slight crack on the back (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV frequency band 20 Hz to 25,000 Hz needle pressure 2.3 g dead weight 9 g impedance 20 ohms
RCA cable 1.0m pair 7N copper wire+3 types of copper wire, 8A core multi-hybrid conductor cable structure. It is an RCA cable that suppresses the individuality of the cable sound as much as possible and aims for a natural sound (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Balance cable, 1.2 m pair, LINN premium cable silver interconnect. Double shield construction using plenty of high-grade copper. It reproduces sound with a large sense of scale with chiseled deep bass (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: case
An unopened 5.0 m pair of RCA cables has been opened for confirmation. SAEC high quality cable designed to be optimal with amplifier output impedances of 100 to 600 ohms. The plug is discolored, and the sheath is sticky due to aging (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box
An unused dead stock item with a 10.0m pair of RCA cables has been opened for confirmation. SAEC name cable designed to be optimal for amplifiers with an output impedance of 15 ohms or less. If you are looking for a long RCA cable, don't miss it. The plug is discolored and there is stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, instruction manual, seal
RCA cable 10.0 m. SAEC name cable designed to be optimal with an output impedance of 100 to 600 ohms for pair amplifiers If you are looking for a long RCA cable, please check it out ※ There is rust on the terminals and stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, seal
Maintained! A tubular mono power amplifier that makes you hear a profound, Macintosh sound. The highly transparent sound was restored through an overhaul. You can enjoy the relaxed and calm sound unique to vintage McKinn. This is a power amplifier I would like to try combining songs from yesteryear when I want to enjoy them with speakers from yesteryear. There is a feeling of use such as dullness, rust, and abrasions (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintenance (volume disassembly cleaning repair, vacuum tube 6550 replacement, vacuum tube socket and RCA jack re-caulking repair. No. 6595 side vacuum tube 12AU7, vacuum tube 5U4GB replacement, fuse holder retightening repair. Operation checked (measured at 48 to 66 W SP: 8 ohms with rated output AC 100 to 117 V) 2022.11.23 operation confirmed. 2021.9.5 maintained (block capacitor 35/80/15 μF replacement x 2, oil capacitor 0.22 μF replacement x 2, vacuum tube 12AX7 replacement 1 x 2, AC cord replacement 1 x 2, vacuum tube socket and RCA jack caulk repair No. 6878 electrolytic capacitor 8 μF other replacement, HUM replacement, 1/2 W resistor replacement No. 6595 vacuum tube 6550 replacement, vacuum tube 5U4GB replacement, resistor 2W exchange Other operation checked (rated output AC 100 to 117 V))
Accessories: none
Main specifications: 60W load 4Ω/8Ω/16Ω frequency characteristics 20 to 30,000 Hz W356 × H203 × D254 mm 20.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/27 Dali's tall boy with a sales price of 138,000 yen. The woofer uses a wood fiber cone, and the tweeter is equipped with a 28mm dome tweeter and ribbon tweeter. In addition to the conventional mid-high range with a high texture, we have acquired a new low range where you can feel the high response. There is slight dirt on the exterior, back bass reflex port, etc., and there is a feeling of use. Serial 1929119 (Murakoshi Yoichi)
Maintenance information: 2024.6.26 sound output confirmed
Accessories: instruction manual, saran net, jumpers, spikes
Main specifications: 3 way 4 speakers bass reflex type frequency characteristics 49 Hz to 32 kHz efficiency 89 dB impedance 4 ohms W195 x H001 x D330 mm weight 18.9 kg
*Currently sold! The saran net dowel is broken on one side, so it's cheap. A JBL middle class speaker with a simple 2-way configuration that reproduces transparent sound and a clear sound field stage. It is characterized by spacious bass and sharp treble. There is a feeling of use such as scratches on the top plate (Tamai Jun)
Maintenance information: 2024.6.27 sound output confirmed
Accessories: saran net
Main specifications: 2-way bookshelf type frequency characteristics 50 Hz to 45,000 Hz sound pressure level 87 dB crossover frequency 3 kHz impedance 6 ohms size W240 x H360 x D266 mm weight 8.2 kg/unit
An RCA cable 0.6 m pair uses the world's most advanced virtual coaxial structure, and by using the same structure as a line cable as well as a microphone cable, it achieves low capacitance and broadband transmission (Asaine Satoshi Method)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Onkyo's small 2-way speaker. Carefully selected parts such as highly rigid enclosures, high-strength units, MONSTER CABLE internal wiring, etc. The sound quality is bright and light, and the crisp playback sound shows the high cost performance. The exterior is dull and has small scratches. Serial 26060J5910700079 26060J5910700079 (Jun Tamai)
Maintenance information: 2024.6.27 sound output confirmed
Accessories: Saran net instruction manual
Main specifications: 2 way bass reflex type input sensitivity 83 dB 4 Ω maximum input 150 W W188 x H302xD296 mm 6.9 kg
※Since it is cheap, it will be handed over as is. Small bookshelf speakers There is no habit, and it makes you feel more three-dimensional than the size. With high frequencies that are comfortable to listen to and low frequencies with instantaneous power, you can fully enjoy good quality music on a desktop size. The exterior has a feeling of use such as being scratched or dull on the top plate. Serial 22110785 22110785 (Asaine Tomoho)
Maintenance information: 2024.6.27 sound output confirmed
Main specifications: 2 way 2 speakers bass reflex impedance 8 ohms sound pressure level 87 dB W130 x H215 x D190 mm 2.7 kg
*iPower ELITE, optical fiber cable (15.0m) included This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE optical fiber cable (15.0 m) power cord (general purpose)
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
※Comes with iPower ELITE This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE power cord
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
This is a prototype that changed the WX-1S, which usually has 3 housings, to 2 woofers. The amplifier section is separate, and it has a simple specification that is simply placed in a plastic case. Sound Art's long-selling 3D speaker system. Once the setting is decided, it is a sense of scale and realism that greatly exceeds the size. * There is no problem with operation, but since the veneer has peeled off, cracks, etc., it is currently sold. (Oikawa Tetsuji)
Maintenance information: 2024.6.26 storefront operation confirmed
Accessories: 2 power amplifiers for woofers, 2 power cables
Main specifications: 2 way 2 speakers+woofer 100W 3D speaker system with built-in power amplifier satellite part W200 x H920 x D180 mm 9.5 kg, woofer part W430 x H300 x D580 mm 15 kg
The disposal price has been reduced (member prices are not applicable). 2024/6/26 sales price 250,000 yen Wadia's first CD transport. Using the VRDS mechanism of the Esoteric P-2S, unique tuning has sharp sharpness and a sound unique to Wadia with a very low center of gravity. The exterior is dull overall, and there are repair marks of tray paint deterioration. According to the previous owner, maintenance was carried out by a contractor last year (Oikawa Tetsuji)
Maintenance information: 2024.6.26 operation confirmed
Accessories: remote control, power supply unit, instruction manual, power cable
Main specifications: CD transport output ST/BNC/TOS main unit W222 x H132 x D437 mm 11.5 kg power supply unit W100 x H132 x D330 mm 5.5 kg
Comes with Digilink30 3rd generation “S” version of the DIGITAL 2000 system. After undergoing drastic sound quality improvements to the Sledgehammer, the next-generation S version is a masterpiece whose overwhelming sound sharpness compared to the 1st generation 2000 system, sharp instantaneous power, and texture in the mid to high range reached a climax. Please enjoy the WADIA sound so you can fully enjoy the amount of information on the CD. There are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.6.26 Operation confirmed (DIGILINK and 2000S are connected via ST link, fiber OK. (Connect to Digilink with BNC from WT-2000S and get 44.1kHz sound)
Accessories: instruction manual, power cable, connection cable
Main specifications: sampling frequency 32/44.1/48kHz [DIGILINK30] input BNC x 3 W216 x H70 x D230 mm weight 2.6 kg [DIGITAL201C] W330 x H58 x D314 mm weight 5.6 kg [DIGITAL2000] W430 x H70 x D330 mm weight 8.5 kg
Acoliba power strip. Uses PSE standard unplated audio grade outlets and audio grade rhodium plated inlets. Sound turbidity is eliminated, and good granularity and a sense of strength can be obtained (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: aluminum alloy housing, 4 openings, W129 x D150 x H35 mm
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. Serial 0903-2G2 (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
MICRO heavyweight record stabilizer Since it is heavy, it has an excellent effect on discs that are warped and difficult to play. There is a small scratch (Tamura Eiji)
Accessories: none
Main specifications: 79 mm in diameter, 30 mm in thickness, 1 kg in weight
Premium power amplifier speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.26 operation confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
SPU-A shell conversion plug It is an adapter that allows an A shell type cartridge with a short pitch to be attached to a general tone arm (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none