An unused dead stock item with a 10.0m pair of RCA cables has been opened for confirmation. SAEC name cable designed to be optimal for amplifiers with an output impedance of 15 ohms or less. If you are looking for a long RCA cable, don't miss it. The plug is discolored and there is stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, instruction manual, seal
RCA cable 10.0 m. SAEC name cable designed to be optimal with an output impedance of 100 to 600 ohms for pair amplifiers If you are looking for a long RCA cable, please check it out ※ There is rust on the terminals and stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, seal
Maintained! A tubular mono power amplifier that makes you hear a profound, Macintosh sound. The highly transparent sound was restored through an overhaul. You can enjoy the relaxed and calm sound unique to vintage McKinn. This is a power amplifier I would like to try combining songs from yesteryear when I want to enjoy them with speakers from yesteryear. There is a feeling of use such as dullness, rust, and abrasions (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintenance (volume disassembly cleaning repair, vacuum tube 6550 replacement, vacuum tube socket and RCA jack re-caulking repair. No. 6595 side vacuum tube 12AU7, vacuum tube 5U4GB replacement, fuse holder retightening repair. Operation checked (measured at 48 to 66 W SP: 8 ohms with rated output AC 100 to 117 V) 2022.11.23 operation confirmed. 2021.9.5 maintained (block capacitor 35/80/15 μF replacement x 2, oil capacitor 0.22 μF replacement x 2, vacuum tube 12AX7 replacement 1 x 2, AC cord replacement 1 x 2, vacuum tube socket and RCA jack caulk repair No. 6878 electrolytic capacitor 8 μF other replacement, HUM replacement, 1/2 W resistor replacement No. 6595 vacuum tube 6550 replacement, vacuum tube 5U4GB replacement, resistor 2W exchange Other operation checked (rated output AC 100 to 117 V))
Accessories: none
Main specifications: 60W load 4Ω/8Ω/16Ω frequency characteristics 20 to 30,000 Hz W356 × H203 × D254 mm 20.7 kg
*Currently sold! The saran net dowel is broken on one side, so it's cheap. A JBL middle class speaker with a simple 2-way configuration that reproduces transparent sound and a clear sound field stage. It is characterized by spacious bass and sharp treble. There is a feeling of use such as scratches on the top plate (Tamai Jun)
Maintenance information: 2024.6.27 sound output confirmed
Accessories: saran net
Main specifications: 2-way bookshelf type frequency characteristics 50 Hz to 45,000 Hz sound pressure level 87 dB crossover frequency 3 kHz impedance 6 ohms size W240 x H360 x D266 mm weight 8.2 kg/unit
An RCA cable 0.6 m pair uses the world's most advanced virtual coaxial structure, and by using the same structure as a line cable as well as a microphone cable, it achieves low capacitance and broadband transmission (Asaine Satoshi Method)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Onkyo's small 2-way speaker. Carefully selected parts such as highly rigid enclosures, high-strength units, MONSTER CABLE internal wiring, etc. The sound quality is bright and light, and the crisp playback sound shows the high cost performance. The exterior is dull and has small scratches. Serial 26060J5910700079 26060J5910700079 (Jun Tamai)
Maintenance information: 2024.6.27 sound output confirmed
Accessories: Saran net instruction manual
Main specifications: 2 way bass reflex type input sensitivity 83 dB 4 Ω maximum input 150 W W188 x H302xD296 mm 6.9 kg
※Since it is cheap, it will be handed over as is. Small bookshelf speakers There is no habit, and it makes you feel more three-dimensional than the size. With high frequencies that are comfortable to listen to and low frequencies with instantaneous power, you can fully enjoy good quality music on a desktop size. The exterior has a feeling of use such as being scratched or dull on the top plate. Serial 22110785 22110785 (Asaine Tomoho)
Maintenance information: 2024.6.27 sound output confirmed
Main specifications: 2 way 2 speakers bass reflex impedance 8 ohms sound pressure level 87 dB W130 x H215 x D190 mm 2.7 kg
*iPower ELITE, optical fiber cable (15.0m) included This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE optical fiber cable (15.0 m) power cord (general purpose)
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
※Comes with iPower ELITE This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE power cord
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
This is a prototype that changed the WX-1S, which usually has 3 housings, to 2 woofers. The amplifier section is separate, and it has a simple specification that is simply placed in a plastic case. Sound Art's long-selling 3D speaker system. Once the setting is decided, it is a sense of scale and realism that greatly exceeds the size. * There is no problem with operation, but since the veneer has peeled off, cracks, etc., it is currently sold. (Oikawa Tetsuji)
Maintenance information: 2024.6.26 storefront operation confirmed
Accessories: 2 power amplifiers for woofers, 2 power cables
Main specifications: 2 way 2 speakers+woofer 100W 3D speaker system with built-in power amplifier satellite part W200 x H920 x D180 mm 9.5 kg, woofer part W430 x H300 x D580 mm 15 kg
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. Serial 0903-2G2 (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Premium power amplifier speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.26 operation confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
SPU-A shell conversion plug It is an adapter that allows an A shell type cartridge with a short pitch to be attached to a general tone arm (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
1.8 m PSE standard power cable “BLACK MAMBA” featured from the fastest snake on Earth. As the name suggests, the sound is supple and high speed. And while it has high resolution, it is designed to be fully flat and balanced to suppress peaks. The letters have disappeared on the sheath and there are some cracks on the coating (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Using a 1.8 m pair of RCA cables, PC-Triple C conductors, we pursue cost performance while maintaining high quality. It has a reputation for its delicate, neutral tone with a high signal-to-noise ratio (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
1.8 m high performance standard power cable for high grade audio devices that is a hybrid of 3 types of soft copper wires: “6N high purity copper conductor,” “pure silver coated OFC,” and “high purity oxygen-free copper” (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
The power cable uses a 1.8 m ultra-high purity 6nCu (copper) /high-purity 5nCu/pure silver-coated OFC, and high-purity oxygen-free copper hybrid conductor. The texture of the instrument has improved, and you can feel the expansion of the space and the sense of range (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Phono cable 1.2m 5PIN-XLR terminal specification DIN plug is a straight 8NCu, 4-type hybrid twin core phono cable using rare 8N copper. The amount of information is rich, and the power and sense of scale expression based on the bass range are outstanding (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
A thick, highly rigid heavyweight shell prepared by Orthophone for cartridges other than the SPU series. It is an easy-to-use headshell with a flat cartridge ground surface and excellent adhesion (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
This is Wilson Benesch's straight arm. Carbon fiber with excellent vibration damping properties is used for the pipe. Coupled with the one-point design, it is possible to achieve sound with extremely no stagnation, precise, and rich in spatial reproduction. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: arm cable
Main specifications: static balance type, effective length 280 mm, compatible cartridge weight 5 to 16 g
Maintained. Amber cap!! MonitorRed15inch. The appeal of this unit is that they can play not only classical music, which TANNOY excels at, but also jazz sauce. The sound quality is solid when starting up, but it is a wonderful unit that also has an elegant sound typical of Tannoy. Please take this opportunity to buy rare units that are hard to come by! (KOBAYASHI Hitoshi)
Maintenance information: 2024.6.25 maintained (unit maintenance: magnetic circuit gap cleaning center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, 4-pin terminal cleaning)
Accessories: network
Main specifications: Official name: Monitor 15 inch 38 cm coaxial 2 way playback frequency band 23 Hz to 20 kHz input impedance 16 ohms magnet weight 5.9 kg crossover frequency 1 kHz maximum input 50 W total weight approx. 6.5 kg
An unused dead stock item with a 10.0m pair of RCA cables has been opened for confirmation. SAEC name cable designed to be optimal for amplifiers with an output impedance of 15 ohms or less. If you are looking for a long RCA cable, don't miss it. The plug is discolored and there is stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, instruction manual, seal
I opened an unopened 10.0m pair of RCA cables for confirmation. The plug is treated with platinum rhodium to resist aging. The sheath is sticky, and the plug is discolored (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box
THORENS INSULATOR SET OF 3. It comes with a screw-type height adjustment function, but as expected, it is made in Switzerland, and the accuracy of how the screw rotates is excellent, and correction at extremely subtle pitches is possible. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 35 mm, height 30 to 35 mm, dead weight 53.1 g (actual measurement)
Set of 8 THORENS spike insulators. Use it for amplifiers and speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: original box (does not close due to broken fasteners)
Main specifications: diameter 35 mm height 40 mm dead weight 48.2 g (actual measurement)
An unopened 5.0 m pair of RCA cables has been opened for confirmation. SAEC high quality cable designed to be optimal with amplifier output impedances of 100 to 600 ohms. The plug is discolored, and the sheath is sticky due to aging (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: instruction manual, original box, seal
A unique set of 4 insulators that can adjust the number of springs according to the weight of the main body being used. Each insulator is arbitrarily adjusted using 5 leaf springs to ensure a maximum load capacity of 12.5 kg per insulator (maximum 50 kg when using 4). It is a special insulator that pursues vibration damping properties. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: original box
Main specifications: spring type insulator, machined brass body, bronze leaf spring (press stamped), diameter approx. 40 mm, height 30 mm (36 mm with 5 springs included), approx. 200 g/piece, maximum load capacity 50 kg (when 4 insulators are used, 5 springs are loaded)
The price has been reduced. 2024/6/25 sales price 14,800 yen self-made bookshelf speaker. The unit uses a Pegasus 409B. The bass is modest, but I have the impression that it goes well with jazz vocals and one-horn jazz. There is an overall feeling of use on the exterior, such as scratches and dullness. Also, the Altech emblem is attached to the saran net, but it is my own work (Hiroki Aso)
Maintenance information: 2024.6.25 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: bass reflex type unit Pegasus 409B coaxial 2 way 20 cm unit size W325 mm x H550 mm x D280 mm weight 14 kg (actual measurement)
RCA-XLR cable 1.0 m pair No. 2 hot specification Oyaide plug 99.9997% pure silver conductors have improved signal conductivity and are characterized by flat sound quality compared to other copper cables. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: none
A higher-level analog player system model in the Pioneer DJ series. While following the interface of the SL-1200, operability has been improved. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: instruction manual power cable
Main specifications: quartz servo direct drive aluminum die-cast platter diameter 332 mm 33/45/2 speed universal type S shaped tone arm static balance type W453 x H159 x D353 mm 14.6 kg
The price has been reduced. 2024/6/25 sales price 24,800 yen ※Current delivery. Built-in high sound quality digital amplifier with maximum output of 500W. By drastically reducing vibrations transmitted to the digital amplifier, clear deep bass is achieved. The exterior is abrasive, dull, etc., and has a feeling of use. Serial ECMN 00370JP (Tomonori Asae)
Maintenance information: 2024.6.25 sound output confirmed
Accessories: Saran net power cable (general purpose)
Main specifications: playback frequency band 25 Hz to 4 kHz size W397xH484xD432mm weight 31 kg
*Currently sold. This model is equipped with Marantz's advanced DAC. The high cost performance is attractive. Clear sound and detailed reproducibility are key points. It also makes modern sauces sound great. This player is recommended for those who want to get started with audio or those looking for a secondary unit. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: copy of the instruction manual, power cable, remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz dynamic range 100 dB power consumption 14 W size W440 x H104 x D339 mm weight 5.1 kg
※PSE standard product! In addition to increasing the number of PB-150 to 6 ports, a t2.0mm thick bonded steel plate was adopted for the chassis to increase rigidity. Furthermore, stainless steel material equivalent to that of advanced models is used for the outlet panel on the top. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: instruction manual, power cable, original box
Main specifications: size W300 x H69 x D126 mm
Maintained! A control amplifier with improved multifunctionality and operability, inheriting the 8-band equalizer function similar to the C50. Digital transmission of SACD (DSD) signals is realized by providing a DIN digital input dedicated to Macintosh as the digital input. Equipped with 2 phono inputs (MM/MC), you can enjoy all music sources from analog records to high-resolution digital sound sources with Macintosh sound. There are no noticeable scratches on the exterior. Serial AEG 1511 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 maintained (backlight LED and resistor replacement, solder correction, audio/remote control reception check, interior and exterior cleaning)
Accessories: remote control, power cord
Main specifications: 4 analog unbalanced inputs, 3 analog balanced inputs, 1 phono input MM/MC, 3 digital input/optical digital systems, 2 coaxial digital systems, 1 USB system (up to 32 bit/384 kHz, DSD 11.2 MHz), 3 analog unbalanced outputs, 3 analog balanced output systems, 3 analog balanced output systems, W445 x H194 x D419 mm 12.5 kg
The price has been reduced! 2024/6/25 sales price 248,000 yen with a dedicated stand. A high-performance bookshelf type speaker with cool, detailed sound and good positioning due to its 2-way configuration. The spatial expression through thorough resonance management, such as a strong dedicated stand and enclosure design, is superb. The dignified sound that remains in the afterglow, the sound where you can feel the three-dimensional density, and the sound with humidity are attractive. Part of the saran net is torn, and there are other dents and threads. Serial 6498, 6499 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: instruction manual, jumper cable, fixing screws, bearing balls
Main specifications: 2 way 2 speaker bass reflex system bookshelf type frequency band 48 Hz to 24 kHz impedance 6 Ω sound pressure level 87 dB body size W216 x H460 x D267 mm 24 kg (including stand) when using stand W305 x H1,050 mm
*Lead wire missing. Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 7g
An Audionix shell that acted as an agent for Autophone in the 1970s. It feels like the MG-10 is slimmer and lighter, and the letters and curves of the brand name are stylish. *Lead wire missing (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: No accessories
Main specifications: Glass fiber reinforced resin mold, dead weight 8g
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: Die-cast aluminum, dead weight 10.2 g
The long arm model with Amtrans arm base is now in stock for the first time! The arm base is SME type. Pure straight FIDELIX tone arm with hard stainless steel and gemstone bearings. The product name is “0 sideForce” because the arm always moves horizontally to balance even when side force is generated, so no canceller is required and the side force becomes 0. It is in good condition with no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: instruction manual, arm cable, screws, shell, cleaner, subway
Main specifications: distance between hard stainless steel (SUS304) turntable and center of arm 299 mm ± 4 mm distance between arm fulcrum and needle point 281 mm underhang 18 mm mounting hole φ30 mm compatible cartridge to 28.5 g (compatible up to 35.5 g when using a sub-weight)
The long arm model with Amtrans arm base is now in stock for the first time! The arm base is SME type. Pure straight FIDELIX tone arm with hard stainless steel and gemstone bearings. The product name is “0 sideForce” because the arm always moves horizontally to balance even when side force is generated, so no canceller is required and the side force becomes 0. It is in good condition with no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: instruction manual, arm cable, screws, shell, cleaner, subway
Main specifications: distance between hard stainless steel (SUS304) turntable and center of arm 299 mm ± 4 mm distance between arm fulcrum and needle point 281 mm underhang 18 mm mounting hole φ30 mm compatible cartridge to 28.5 g (compatible up to 35.5 g when using a sub-weight)
This model was fully restored by our company in 2016. Furthermore, exterior maintenance and interior maintenance have also been completed. The popular LUXMAN classic 38 series. The graininess and fineness of the sound have been brilliantly revived. The soft, warm, and thick sound is soothing from the core (Sasaki Shota)
Maintenance information: 2024.6.25 Maintained (parts replacement, input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 28 W+28 W, actual measurement), sound output test. Exterior repair/polishing/painting)
2016.11.6 Maintained (9P socket, volume/BAL/BACK, TC VR, headphone jack, SP terminal board, RCA terminal, resistor, coupling capacitor, AC cord replacement. Lever SW overhaul, adjustment, and characteristic check are OK. Clear cabinet finish Fill in square putty, color repair. (Top plate grill paint)
Accessories: copy of the manual
Main specifications: 30W+30W frequency characteristics 10Hz-50kHz vacuum tube/12AX7 x 3, 12AU7 x 3, 6267 x 2, 50C-A10 x 4, W476 x H190 x D335 mm 18 kg
3rd generation voicing equalizer. Sound field correction/sound field creation is possible freely in the listening room by simply operating the touch panel screen with a single pen. How about a companion to your pursuit of a music space of your choice? The microphone holder has been changed to an Audio-Technica AT8407 (Shota Sasaki)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control, manual, power cable, original box, connection cable, microphone, stylus, microphone holder (AT8407)
Main specifications: 35 band real-time playback frequency characteristics 0.5 to 50,000 Hz (sampling frequency 2.8224 MHz or 192 kHz) 4.0 to 20,000 Hz digital input/output: HS-Link, coaxial digital, 1 optical digital system each dimensions W465 x H151 x D396 mm weight 13.8 kg
※Currently sold, the remote control is out of stock, so it is cheap. Second generation model in Denon's entry-class 390 series. A sense of energy above the price, and a sound with a clear outline of the mid-range. The cost performance is high! You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) PHONO (MM) 1 line input 3 system tape system 1 system W434 × H121 × D338 mm 7 kg
The 4-piece insulator set has a unique three-dimensional special support structure, making effective use of the beneficial vibrations of the equipment and preventing the occurrence of harmful vibrations. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: original box
Main specifications: load capacity 25 to 50 kg/4 pieces, diameter 50 x 35 mm, weight 135 g/1 piece
Comes with original box. Sennheiser Bluetooth 5.0 compatible headphones. It is a product that is compatible with Sennheiser's proprietary SmartControl application, has a 30-hour battery life, and high cost performance. Low frequency playback is good! The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box
Main specifications: frequency band 18 Hz to 22,000 Hz adapter 3.5 mm cable length 1.5 m weight 238 g
Exterior maintenance completed! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound (Kobayashi Hitoshi)
Maintenance information: 2024.6.25 Maintenance completed (enclosure polishing, oil/wax coating, baffle painting, lattice repair/polishing/painting, backing fabric replacement, unit maintenance: floating edge reattachment, cone paper coating, unit detachment)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
※6 month warranty Mount Altec's 405-8B full range unit in a self-made backload enclosure. The enclosure is well-built. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: saran net
Main specifications: W200×H460×D220mm 6.6kg (actual measurement)