Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi)
Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is dull, and there is a feeling of use and oxidation. Serial 127176, 128196 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. The efficiency can be switched between 5 levels with the rotary switch, creating natural overtones. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
※There is no problem with the operation, but the AC adapter sticking is sweet. A D/A converter with a unique design. The design concept, which places emphasis on musicality over physical characteristics, is an attractive sound not found in Japan. Please enjoy the warm, thick sound quality. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: AC adapter
Main specifications: HDCD compatible, output RCA x 2, digital input optical x 1, coaxial x 1, W107 x H107 x D205 mm, 1.3 kg
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: dead weight approx. 13g
Pioneer carbon fiber molded headshell. Simple and easy to use design. It is also attractive that it has a slightly lighter weight and is easy to combine. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber molding dead weight 9.5 g
*Currently sold. Although it is small and compact, the sound quality can truly be called a celebration. The sound quality is smooth and warm, so you won't get tired even if you listen to it for a long time. Feel free to enjoy classical music and vocals. The exterior has line marks and dullness. Serial 656558/656560 (Takasaki Atsushi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: saran net
Main specifications: 2-way sealed 2.5cm titanium dome tweeter 15cm woofer impedance 8Ω efficiency 88dB W206 x H350 x D250 mm weight 4.7 kg
RCA cable, 1.0 m pair, 6N copper conductor, and a luxurious specification using 6N material for the shield. It is a cable with resolution and natural sound quality perfect for high-resolution playback (Yoichi Murakoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N copper, 2-core conductor, aluminum shield. It is a cable suitable for vocals with just the right balance between sound loss and mid-range thickness (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable 1.2m pair 6N copper collet chuck plug with straightforward sound quality that honestly brings out the individuality of a system without dramatization typical of the 6N. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 3-core blade structure, uses high-purity copper. Although it is a model positioned as an introductory grade, you can enjoy the sense of dynamism and stretch of sound typical of Kimber (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/15 sales price 398,000 yen A parallel push-pull mono power amplifier using EL34. The delicate, clear sound with good visibility is still wesugi! The perfect balance and expressiveness of the warmth and transparency typical of a vacuum tube is attractive. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: none
Main specifications: Parallel push-pull operation rated output 40W (continuous output) output impedance 4Ω, 8Ω, 16Ω playback frequency band 20Hz to 20kHz W435 × H232 × D175 mm 22 kg
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is dull over time, and there is a lot of feeling of use. Serial MZ02821280143 (Murakoshi Yoichi)
Maintenance information: 2024.6.14 maintenance (tray slide motor belt and CD standby motor belt, C replacement in CD servo)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
1 sheet only Taock audio board It has a 5-layer structure with cast iron sandwiched between MDF and oak veneer attached to the surface material. It can be expected to prevent floor noise and improve sound quality. Dullness and bruising are scattered (Tomoho Asaine)
Accessories: none
Main specifications: MDF main material W500 x D450 x H55 mm 9 kg
An audio board that makes full use of the sounds of natural materials. High-density lumbar core plywood using rubber wood as the base is used. Moabi (Nanyo cherry) wood is used as the surface material used in high-grade furniture. An item that takes resolution, good localization, and a sense of volume in the low range to a higher level. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: load capacity is 100 kg W450 x H30 x D400 mm 4 kg
It is the base for Yamamoto's acoustical crafts, which are highly regarded for their horns and enclosures. The plate-shaped base is made of laminated Asada cherry wood, and can be used not only as an amplifier, but also as a speaker stand. Stability has been improved, and you can enjoy tight sound quality (Hiroki Aso)
Main specifications: thickness: 25 mm; dimensions: 600 x 480 mm; weight: 4.5 kg
Set of 4 African ebony 32mm diameter spike base By itself or in combination with the company's PB-9, it can be placed under a speaker, amplifier, etc., to improve sound quality. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: diameter 32 x thickness 12 mm
Set of 4 African ebony 32mm diameter spike base By itself or in combination with the company's PB-9, it can be placed under a speaker, amplifier, etc., to improve sound quality. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: diameter 32 x thickness 12 mm
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W450 x D500 x H40 mm approx. 7 kg
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W450 x D500 x H40 mm approx. 7 kg
The price has been reduced. 2024/6/15 sales price 17,000 yen Krypton thin audio board. The original technology, heavyweight “iron ball sand,” has been adopted, which has a very large specific gravity to prevent electromagnetic noise from the device, and the mass is also heavy, making it possible to absorb external vibrations drastically due to the vibration of the iron ball. There is a feeling of use on the exterior such as dullness and line damage (Asaine Tomoho)
Accessories: none
Main specifications: W450 x H21 x D400 mm 5.2 kg
1 sheet only ASK board insulators. Of course, simply placing it under the CD player improves the signal-to-noise ratio and creates tight bass. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W545 × H45 × D445 mm 13 kg
Set of 3 A masterpiece insulator that made the name of ROSEN KRANZ known to the world. I think there were many people who were surprised at how expensive it was at the beginning of the sale. However, it is an item worth its price, and it can add freshness and thickness to the system currently in use. There are dullness and small scratches on the exterior (Yamato Yuki)
Accessories: none
Main specifications: spike diameter 35 mm x height 15 mm weight 67 g spike receiver diameter 35 mm x height 8 mm weight 61 g
The price has been reduced. 2024/6/15 sales price 16,800 yen VM520EB model with head shell AT-HS10. Uses a bonded elliptical needle and aluminum pipe cantilever to reduce tracing distortion and extract accurate information. High frequency sensitivity and amount of information shine (Tomoho Asaine)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: original box head shell AT-HS10
Main specifications: VM type playback frequency range 20 to 23,000 Hz output voltage 4.5 mV (1 kHz, 5 cm/sec.) Channel separation 27 dB (1 kHz) output balance 1.5 dB (1 kHz) needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 2.7 kΩ (1 kHz) DC resistance 800 Ω load resistance 47 kΩ mass 16.8 g (6.4 g for VM520eB only)
The price has been drastically reduced! 2022/6/15 sales price 12,000 yen 1 sheet only. The TAOC Sycamore Sound Creation Board is now in stock. How about it under the feet of tall boy speakers with spikes, which are common these days, and I recommend it to those who want to keep the bass sharp. There is a slight feeling of use on the exterior, but it is relatively good with no noticeable scratches (Asaine Tomo)
Accessories: none
Main specifications: melamine veneer, cast iron powder, high-density wood board x 2, 5-layer structure of phenolic laminated board, external dimensions W350 x D450 x H40 mm, weight 5.0 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior is damaged and dull, and there is a feeling of use due to aging (Tamai Jun)
Maintenance information: 2024.6.15 sound output confirmation maintenance completed (32009 side rotary switch disassembly cleaning exterior/terminal cleaning internal parts fixed row correction waveform confirmation)
Accessories: none
Main specifications: crossover frequency/500 Hz level control/3 position switch 8 ohm size W159 x H153 x D120 mm 2.3 kg
Case included. Higher-OFC is coated with high-purity silver for the 1.5m conductor of the power cable, and rhodium plating is used for the plug. The center of gravity changes to a thicker sound quality with a lower center of gravity. The exterior is a beautiful item with no feeling of use. (Yamato Yuki)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: case
Set of 3 An insulator with the same direction of sound based on the company's PB-REX. It is designed to be aligned not only vertically but also horizontally, so you can expect precision and a high signal-to-noise ratio. There are dullness and small scratches on the exterior (Yamato Yuki)
Accessories: none
Main specifications: spike diameter 35 mm x height 15 mm weight 79 g spike receiving diameter 35 mm x height 10 mm weight 76 g (actual measurement)
Case included. Higher-OFC is coated with high-purity silver for the 1.5m conductor of the power cable, and rhodium plating is used for the plug. The center of gravity changes to a thicker sound quality with a lower center of gravity. The exterior is a beautiful item with no feeling of use. (Yamato Yuki)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: case
1.5m digital XLR cable with no liquid leaks, plasma shielding The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. On the exterior, there is dullness on the terminals. Serial 10007514 (Yonejima Satoshi)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: none
RCA line cable 2.0m pair model using plasma (metal compound powder) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
*Model using 1.0 m pair plasma (powder of metallic compounds) shielded with the No. 2 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 303872 (Yonejima Satoshi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. remote control, internal cleaning, general adjustment)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation)
Accessories: remote control, instruction manual, power cable
Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
The price has been drastically reduced. 2024/6/14 Sales price 228,000 yen Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. On the exterior, there is a feeling of use such as small scratches and dirt on the front, and dullness of the terminals. Serial E5Y882 (Kanai Hidetsugu)
Maintenance information: 2024.6.13 manufacturer maintenance (main volume, balance volume cleaning, meter, input switch replacement, inspection, adjustment, safety check, pressure resistance check)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 maintenance completed (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 305572 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10002357, 10002357 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Power transformer Orient core primary: 100V secondary: 2.5-6.3V/3A x 3, 5V/3A, 350-320-290-70-290-320-350V/DC170mA W103 x H94 x D86 mm 3.7 kg (actual measurement, not including protrusions) There are minor injuries and line wounds (Kojima Yosuke)
Accessories: none
Choke transformer inductance 15H/0.1A DC resistance 247.3 Ω (actual measurement 245.9 Ω) W63 × H100 × D50 mm 1.2 kg (actual measurement, not including protrusions) Surfaces other than the terminal side are painted gray, and the name plate part is also painted (Kojima Yosuke)
Accessories: none
Maintained by Luxman! This model is a return to Luckstone, which is reminiscent of the tube ball era. By changing from pure A grade up until then to grade AB, the sense of extrusion is prioritized, and the corners of the high range are rounded up to give the mid to low frequencies a sense of volume. It has excellent sharpness, and I would recommend this amplifier to almighty music fans. On the exterior, there are dirt scratches, threads, and peeling on the veneer sheet. Serial W90712062H (Tamura Eiji)
Maintenance information: 2024.6.14 Maintained by the manufacturer (power supply part, fuse broken replacement. Install the volume and fix it. Output relay contact fault replacement. Meter lamp replacement. Power supply unit, diode replacement. Replace the amplifier section and semi-fixed volume for adjustment. Board solder correction. volume, switch contact cleaning. Remote control replacement (Internal cleaning, general cleaning)
Accessories: remote control, power cable
Main specifications: 70W+70W W467 x H179 x D440 mm 19 kg
RCA cable 0.75m pair REAN plug Neumann RCA cable familiar from the prestigious German family. Recommended for those who listen to classical music on records. Since it is slender and soft, it is useful in a variety of situations. There is dullness on the plug. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 100003931 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Digital cable 1.0 m (RCA-BNC terminal) revision B type. A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. On the exterior, oxidation and darkening of the terminals can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
The balance cable is a 1.0m pair XLR female (2nd hot) to XLR male (3rd hot). The silver-plated OFC conductor is bright and clear, and you can enjoy the transparency of a PAD. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
As an ideal interface between mid-class audio components for a 1.0 m pair of RCA cables, it fully demonstrates its performance for any device and provides the enjoyment of music along with warm temperatures. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0 m digital cable, BNC terminal revision B type on both ends A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none