The sound quality of the 2.0m XLR male to XLR female cable gives the impression that it is solid and natural, and the impression is that it makes the most of the original material of the equipment. In addition to discoloration seen on the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag
Although it was an unopened item, I only opened the outer box for a photo shoot. This is a solid turntable mat made of special metal. Resonance in the low frequencies is stopped, and deep low frequency reproduction such as sinking is possible. It can also be expected to play an active role as a countermeasure against howling (Kobayashi Hitoshi)
Accessories: instruction manual, original box, screwdriver, metal fittings
Main specifications: Diameter measured approx. 300 mm, dead weight approx. 870 g
The sound quality of the 2.0m XLR male to XLR female cable gives the impression that it is solid and natural, and the impression is that it makes the most of the original material of the equipment. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag
1 bottle only. Speaker cable, 3.9 m, terminal, unprocessed three-layer coaxial core wire, has a multi-directional twisting structure with good sound loss, yet has a well-balanced sound with a good sense of volume and texture. There is rubbing and dirt on the sheath (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Tamai Jun)
Maintenance information: 2024.6.22 maintained (exterior repair/polishing/oil finishing before and after baffle coating saran frame paint net replacement plate repair horn cleaning diffuser cleaning/painting woofer maintenance (edge replacement cone paper coating)
Midmaintenance (edge replacement cone paper coating)
Driver maintenance (magnetic circuit rust removal/in-gap cleaning center adjustment, sound-absorbing material replacement terminal cleaning/screw replacement) tweeter maintenance (frame coating magnetic circuit rust removal gap cleaning terminal cleaning screw replacement)
Unit detachment network maintenance (frequency characteristic check, SW/ATT cleaning, terminal cleaning screw replacement) operation check)
Accessories: saran net
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
The price has been reduced! 2024/6/22 sales price 188,000 yen*It is cheap because it has a slight tobacco smell. Comes with original box! This current player was born as a model commemorating Denon's 110th anniversary. SACD player equipped with Ultra AL32 processing. A high-fidelity machine with a sense of speed that can handle modern scenes, and the characteristics typical of a modern aircraft with excellent performance have been added. The wide range and the good sense of SN stand out. The exterior has a slight tobacco smell in addition to dullness and small scratches. Serial DBFN052100541 (Hiroshi Aso)
Maintenance information: 2024.6.22 operation confirmed
Accessories: Remote control instruction manual, power cord, connection cable, original box
Main specifications: Playback frequency range 2 Hz to 100 kHz dynamic range 118 dB unbalanced output x 1, digital audio output terminal, coaxial digital output x 1, optical digital output x 1 W434 x H138 x D405 mm 16.5 kg
Beautiful item with original box! Late version of the representative model V15 with MM type cartridges. Compared to the previous model, the sense of range is wider, sharpness is increased, and the impression is clean. The needle tip is good (Tamai Jun)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: original box
Main specifications: output voltage 3.2 mV playback frequency 20 Hz to 20 kHz output impedance 815 ohms load resistance 47 kΩ needle pressure 1.5 to 1.75 g needle tip 0.15 x 3 mil micro ridge self weight 6.6 g
The RCA-XLR conversion cable 1.0m pair No. 2 hot plug is a reliable and proven Negrex commercial cable manufactured by Neutrik. Clear and honest sound quality (Mamoru Hatano)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Digital coaxial cable 3.0 m RCA specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The 1.5m pair No. 2 HOT terminal of the XLR-RCA cable is a standard BELDEN line cable that clearly outlines the REAN (NEUTRIK) terminal and has a firm thickness, especially in the mid to low range. There are marks and stains on the root part of the sheath (Jun Tamai)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/22 sales price 498,000 yen including the unit, interior and exterior have been refreshed and maintained! The unit used in the C56 Dorian S1 type is the same as the later L101. The depth of the rich low frequencies of the Alnico LE14A is tight with Lanzaroi edges, and the high frequencies with a dry atrium unique to the 175DLH make you hear vintage sounds unique to the Lancer. The combination of a marble top plate and a beehive horn creates a tasteful sound that resonates a lot. Exterior maintenance has been carried out on the exterior, but there are a few small chips in the marble top plate (Hiroki Aso)
Maintenance information: 2024.1.25 maintained (exterior repair/polishing/oil finish, top plate, marble polish, lattice repair/polishing/painting, backside fabric replacement front and rear baffle, hakama, honeycomb horn coating, woofer maintenance (softening treatment/cone paper coating) driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound-absorbing material replacement terminal contact cleaning) ATT cleaning/terminal retightening unit detachable)
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, floor type, 35.5 cm cone type for low range (LE14A), high range horn type (LE175DLH), network LX10 impedance 8 ohms, W440 x H620 x D310 mm, 39.0 kg/1
PSE standard product Power cable 1.0m PS AUDIO power cable with a reputation for quality. This model is particular about manufacturing methods, such as using custom-made plugs and applying high pressure welding with a hydraulic press to the contact point between the conductor and connector. The exterior is dull (Mamoru Hatano)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
RCA-XLR conversion cable, 1.0m pair, 2nd hot RCA plug made by CANARE, XLR plug used originally as a microphone cable, so sound loss is good. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2023.6.11 continuity confirmed
Accessories: none
The 1.5m BNC digital cable uses a D.U.C.C. conductor made of 7N class high-purity copper, which is the purest in the world. Oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Tamai Jun)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
*This is an RCA 3.0 m plug with only one end, and both ends are manufactured by Neutrik. Dependable and proven Negrex commercial cables. The sound quality is clear and straightforward. There are small scratches etc. on the exterior (Hatano Mamoru)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
It is an attractive cable with an outstanding sense of stability with only 3.0 m 1 RCA cable, and since it has a good balance, it is perfect for leveling up from the attached cable (Asaine Tomoho)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The 1.5m pair terminals of the RCA cable are made by Neutrik. This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Digital cable 1.0 m In addition to wire materials using the unique aluminum/copper alloy “Alumlloy,” M.D.T. (Minimizd.Dleleotria.Teohnology) technology, which succeeded in making the cable film as thin as possible, was adopted. There is a feeling of use such as dirt on the sheath part (Asae Tomoho)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/21 sales price 135,000 yen Maintained! Following the technology at the time of development of the advanced C-2302, a balanced configuration was adopted for the advanced α-X circuit and power supply unit. The sense of strength and driving power of the highest class as a premain is attractive. The exterior is scratched on the side panel, and there is dullness on the front (Mizusaki Ryo)
Maintenance information: 2024.6.21 maintained (power amplifier direct, etc., switch disassembly polishing grease application (input selector, source direct, tape, reck-out, tone, turnover, muting, loudness, processor, subsonic, MM/MC switch), output relay, headphone relay replacement, power amplifier circuit transistor, adjustment volume replacement, solder repair, Interior and exterior cleaning, DC, bias adjustment, operation check. (Clean the mounting screws)
Accessories: copy of instruction manual
Main specifications: 160W+160W (8Ω) 190W+190W (6Ω) phono equipped with advanced α-x balance circuit (MM/MC switching) dimensions W460 x H161 x D446 mm weight 33 kg
Sound transparency is greatly improved by adopting a coaxial single-core structure suitable for microwave transmission in the 1.5m pair gigahertz band of RCA cables in the cable. There is no coloring, and phase information can be obtained with accurate playback sound (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2024/6/21 sales price 328,000 yen with original stand (list price 64,000 yen)! Marble top model It is an improved model of the popular S143, and it expresses sharp and smooth sound images full of dynamism by making the resolution and clarity of the sound more prominent while keeping the richness of volume that is characteristic (Murakoshi Yoichi)
Maintenance information: 2024.6.20 exterior repair, cleaned
Accessories: saran net, jumper, stand, marble top plate, spike holder
Main specifications: 3-way bookshelf impedance 6 ohms allowable input 250 W frequency characteristics 35 Hz to 40 kHz crossover frequency 1.3 kHz/11 kHz dimensions W422 x H1,001 x D403 mm (including stand) weight 55.2 kg (including stand)
Set of 4 banana plugs Secure Y lug fixing banana plugs and Y lug terminals vertically. The tip is split into 4 parts, and is designed to hold firmly and securely at 4 points when the screw is tightened after connection (Kojima Yosuke)
Accessories: none
This is a model close to REFERENCE with a 1.25m RCA plug teflon air insulation shield on both ends of the 1.25m phono cable. It's a familiar Caldas sound with excellent thickness and energy. There are abrasions on the sheath and discoloration on the ground terminal (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/6/21 sales price 528,000 yen regular Oba Shoji model. The original model is in excellent condition and the display is blue! It's a supple, mature expression, and you can also listen to the sound of excellent quality. It is an excellent control amplifier that also has the great advantage of being easy to bring to your own favorite sound with accessories such as cables. Other than the exterior and stickiness on the rubber feet, they are good because they are dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: remote control, power cord, connection cord
Main Specifications: Input: XLR×5/Bypass XLR×1 Output: Main Out XLR×1/Record Out XLR×1 Preamp Part: W445 × H80 × D152.5mm 11kg Power Supply Unit: W445 × H38 × D122 mm 3 kg
XLR (male) to RCA (female) conversion adapter (No. 2 hot). The sound quality is fresh without feeling that the amount of information is missing. It looks like it's unopened, but there is a slight feeling of use. *There are models of CGA RCA/XLR that cannot be used with the XLR terminals mounted on some audio products (Yoichi Murakoshi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
216mm pole (19mm diameter) set of 4 silver color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions, line scratches, and paint peeling in places (Murakoshi Yoichi)
Accessories: none
100mm pole (19mm diameter) set of 4 black color, please use it to add shelves or extend poles for Q4, Q4D, etc. (Murakoshi Yoichi)
Accessories: none
Key Specifications: 100mm length/19mm diameter optional pole
Set of 4 spike feet for 19mm diameter poles for Q4D and Q4 racks The sharpness unique to spikes with a good sense of resolution can be obtained. There are abrasions and dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 19 mm, length 78 mm ※ height adjustable up to 5 mm
Glass shelf for Q4D It can be rearranged with the Q4D shelf board you have. How about making it look elegant (Murakoshi Yoichi)
Accessories: none
Main specifications: external dimensions W600 x D475 mm weight 5.4 kg
Glass shelf for Q4D It can be rearranged with the Q4D shelf board you have. How about making it look elegant (Murakoshi Yoichi)
Accessories: none
Main specifications: external dimensions W600 x D475 mm weight 5.4 kg
The edge has been softened! A versatile speaker that can be enjoyed regardless of choice, with an excellent diatone range balance. The overall sound quality gives a tight impression, and it plays music with tight low frequencies and clear mid to high frequencies. There are small scratches, dullness, etc. on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.6.20 maintenance (edge softening treatment, mid grille dent repair, unit detachment, exterior repair/cleaning)
Accessories: saran net
Main specifications: 3 way 3 speakers anti-magnetic design impedance 6Ω W400×H700×D330 mm 29.0 kg
The price has been reduced! 2024/6/16 sales price 49,800 yen Maintained! Introducing affordable power amplifiers. Since it comes with a selector and volume, it can also be used as a pre-main. The color is calm green. It feels a bit clear, but the sound quality is hard to get at this price. The exterior has a feeling of use such as disappearing lettering and dullness. Serial 02110183 (Tomonori Asaine)
Maintenance information: 2024.6.21 maintained (right CH output tube replacement function SW cleaning vacuum tube pin cleaning capacitor position correction wiring restyling bias check output voice check interior and exterior cleaning)
Accessories: power cable
Main specifications: 6BQ5 push-pull output 12W 100V vacuum tube used: 6BQ5 × 2 · 12AX7 × 1 · 12AU7 × 2 · 5AR4 W360 × H170 × D260 mm weight 12 kg
Set of 4 100mm pole (19mm diameter), set of 4, black color, please use it to add shelves or extend poles for Q4, Q4D, etc. (Asaine Satoshi Method)
Accessories: none
Key Specifications: 100mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Tomoho Asaine)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 Spikes compatible with 19 mm diameter quadraspires. Set of 4 The color is silver. It helps improve the damping effect. There are spots and small scratches on the exterior (Tomonori Asae)
Accessories: none
Main specifications: height adjustable up to 5 mm; dimensions: 19 mm diameter: 78 mm long; weight: 47 g/bottle
Set of 4 Set of 4 326mm poles for rack Q4D and QAVM series silver This length is useful when installing large power amplifiers. There are small scratches and dullness on the exterior (Tomonori Asaine)
Accessories: No accessories
XLR cable 1.5m pair interconnect cable with unknown details The plug is made by Neutrik (Tomoho Asaine)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
XLR-RCA cable 1.5m pair No. 2 HOT terminal is a REAN (made by NEUTRIK) terminal It is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Asaine Tomoho)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: No accessories
The price has been reduced! 2024/6/21 sales price 258,000 yen ※It's cheap because there are bumps and scratches. A premain amplifier with a low center of gravity, thick enough to listen to. It is a product where you can feel the culmination of Denon, which has a wide high range and high transparency. While it has plenty of driving power, it is an attractive premain with a glossy medium to high range expression. The exterior has scratches, scratches, etc. on the exterior. Serial 5061500193 (Fujisawa Yukishi)
Maintenance information: 2024.6.21 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 120W+120W (8Ω) input RCA4 system+PHONO1 system (MM/MC) power consumption 380W W434 x H181 x D494 mm weight 29 kg
Maintained! The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. *Remote control and transport lock screws are missing. The exterior has scratches, dirt, and bumps. Serial MZ019415100166 (Fujisawa Yukishi)
Maintenance information: 2024.6.21 Maintained (replacement of each drive belt due to deterioration of the tray and clamp drive system belts. Disassemble the mechanical part and clean it. Grease application. Optical system cleaning)
Accessories: No accessories
Main specifications: analog output RCA1 system, digital output 2 coaxial systems W458 x H110 x D369 mm 11 kg
Maintained. Elliptical type with built-in step-up transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The shell has deteriorated, the paint has peeled off, and the ring around the logo is damaged. Serial 033290 (Fujisawa Yukishi)
Maintenance information: 2024.6.21 Maintained (damper adjustment, cleaning)
Accessories: needle cover
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
BNC (male) to RCA (female) conversion plug for PADs It's an item that doesn't make you feel that information is missing (Fujisawa Yukishi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: No accessories
The balance cable uses an 8-core multi-hybrid conductor with 2 pairs of 4 types of copper wires arranged in 2 pairs each: 3.0 m pair 7N ultra-thick high-purity copper wire, AgA silver-plated soft copper wire, PCOCC single crystal oxygen-free copper wire, and OFC oxygen-free copper wire. This cable has an excellent balance between sound thickness and stretchability. The exterior has a feeling of use such as dullness or twisting (Asaine Tomoho)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
Power cable 1.5m eyeglass specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Asaine Tomoho)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/6/21 sales price 348,000 yen EVO model with methacrylate panels for the top plate and aluminum panels for the side plates. The twin parallel push-pull JOB circuit uses a large capacity power transformer with an independent LR, and the compact yet powerful, high-speed sound is attractive. There is a hook or line scratch on the top plate, a line scratch on the side edge of the front, and a small scratch on the side ※Power cables are being ordered (Kojima Yosuke)
Maintenance information: 2024.6.21 operation confirmed
Accessories: Power cable x 2
Main specifications: rated output 250W (2-8Ω) W300 ✕ H65 ✕ D300mm 9kg/unit
※Parallel product. Good working condition! A masterpiece of CD players that Lin is proud of. It has a very calm appearance and a slightly warm sense of temperature, and a rich sound with depth. Versatility regardless of genre is the ultimate form of an all-in-one player. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.6.21 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: CD player, smart drawer, brilliant power supply, W320 x H80 x D350 mm, 12.0 kg
Fully maintained! 2-way floor speaker with double woofer (stagger) +1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.6.20 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn paint, saran net replacement, woofer maintenance: edge replacement/cone paper coating, terminal cleaning/screw replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching (SW cleaning, terminal cleaning/screw replacement unit detachable)
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
digital line transformer. It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. Recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player. There are dullness and dents (Daiki Goto)
Maintenance information: 2024.6.20 Operation confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg